https://papers.cool/arxiv/cond-matCondensed Matter2024-08-15T00:00:00+00:00python-feedgenCool Papers - Immersive Paper Discoveryhttps://papers.cool/arxiv/2408.07122Slow approach to adiabaticity in many-body non-Hermitian systems: the Hatano-Nelson Model2024-08-15T00:00:00+00:00Léonce DupaysAdolfo del CampoBalázs DóraWe explore the near adiabatic dynamics in a non-Hermitian quantum many-body system by investigating a finite-time ramp of the imaginary vector potential in the interacting Hatano-Nelson model. The excess energy, the Loschmidt echo, and the density imbalance are analyzed using bosonization and exact diagonalization. The energy becomes complex valued, despite the instantaneous Hamiltonian having the same real spectrum throughout. The adiabatic limit is approached very slowly through damped oscillations. The decay scales with $\tau^{-1}$ with $\tau$ the ramp duration, while the oscillation period is $2L/v$ with $v$ the Fermi velocity and $L$ the system length. Yet, without the need for auxiliary controls, a shortcut to adiabaticity is found for ramp times commensurate with the period. Our work highlights the intricate interplay of adiabaticity and non-Hermitian many-body physics.https://papers.cool/arxiv/2408.07127Universal non-thermal power-law distribution functions from the self-consistent evolution of collisionless electrostatic plasmas2024-08-15T00:00:00+00:00Uddipan BanikAmitava BhattacharjeeWrick SenguptaDistribution functions of collisionless systems are known to show non-thermal power law tails. Interestingly, collisionless plasmas in various physical scenarios, (e.g., the ion population of the solar wind) feature a $v^{-5}$ tail in the velocity ($v$) distribution, whose origin has been a long-standing mystery. We show this power law tail to be a natural outcome of the self-consistent collisionless relaxation of driven electrostatic plasmas. We perform a quasilinear analysis of the perturbed Vlasov-Poisson equations to show that the coarse-grained mean distribution function (DF), $f_0$, follows a quasilinear diffusion equation with a diffusion coefficient $D(v)$ that depends on $v$ through the plasma dielectric constant. If the plasma is isotropically forced on scales much larger than the Debye length with a white noise-like electric field, then $D(v)\sim v^4$ for $\sigma<v<\omega_{\mathrm{P}}/k$, with $\sigma$ the thermal velocity, $\omega_{\mathrm{P}}$ the plasma frequency and $k$ the maximum wavenumber of the perturbation; the corresponding $f_0$, in the quasi-steady state, develops a $v^{-\left(d+2\right)}$ tail in $d$ dimensions ($v^{-5}$ tail in 3D), while the energy ($E$) distribution develops an $E^{-2}$ tail irrespective of the dimensionality of space. Any redness of the noise only alters the scaling in the high $v$ end. Non-resonant particles moving slower than the phase-velocity of the plasma waves ($\omega_{\mathrm{P}}/k$) experience a Debye-screened electric field, and significantly less (power law suppressed) acceleration than the near-resonant particles. Thus, a Maxwellian DF develops a power law tail. The Maxwellian core ($v<\sigma$) eventually also heats up, but over a much longer timescale than that over which the tail forms. We definitively show that self-consistency (ignored in test-particle treatments) is crucial for the development of the universal $v^{-5}$ tail.https://papers.cool/arxiv/2408.07140Nanostructuring of AlCu alloy NPs obtained by FLASiS†2024-08-15T00:00:00+00:00Jesica M. J. SantillánDavid Muñetón ArboledaOsvaldo FornaroMarcelo LesterDaniel C. SchincaLucía B. ScaffardiIn the nanometric scale, alloy nanomaterials behave as new materials since they are able to display structures and properties which are different from those of the pure metal nanostructures or bulk alloys. In this work, the compositional characteristics of AlCu alloy nanoparticles obtained by {\dag}Femtosecond Laser Ablation Synthesis in Solution (FLASiS) on solid targets with different percentages of Al and Cu were studied. Morphology, structure, composition and plasmonic behaviour of the nanoparticles were analysed by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray Spectroscopy (EDS) and Optical Extinction Spectroscopy (OES). From the obtained results, underlying formation mechanism and a configuration model of a host alumina matrix with copper inclusions is proposed. Analysis of the plasmonic resonance spectral region in the extinction spectra of the synthesized colloids using this model show that the nanoparticles have a Cu filling factors of about 0.02 which agrees with those determined independently from TEM images. The amount of Al and Cu components in the nanoparticle depends on their relative percentages in the initial solid target. Here we describe the possible kinetic formation mechanism of these nanostructures.https://papers.cool/arxiv/2408.07183Tunable Doping and Mobility Enhancement in 2D Channel Field-Effect Transistors via Damage-Free Atomic Layer Deposition of AlOX Dielectrics2024-08-15T00:00:00+00:00Ardeshir EstekiSarah RiazimehrAgata PiacentiniHarm KnoopsBart MaccoMartin OttoGordon RinkeZhenxing WangKe RanJoachim MayerAnnika GrundmannHolger KalischMichael HeukenAndrei VescanDaniel NeumaierAlwin DausMax C. LemmeTwo-dimensional materials (2DMs) have been widely investigated because of their potential for heterogeneous integration with modern electronics. However, several major challenges remain, such as the deposition of high-quality dielectrics on 2DMs and the tuning of the 2DM doping levels. Here, we report a scalable plasma-enhanced atomic layer deposition (PEALD) process for direct deposition of a nonstoichiometric aluminum oxide (AlOX) dielectric, overcoming the damage issues associated with conventional methods. Furthermore, we control the thickness of the dielectric layer to systematically tune the doping level of 2DMs. The experimental results demonstrate successful deposition without detectable damage, as confirmed by Raman spectroscopy and electrical measurements. Our method enables tuning of the Dirac and threshold voltages of back-gated graphene and MoS${_2}$ field-effect transistors (FETs), respectively, while also increasing the charge carrier mobility in both device types. We further demonstrate the method in top-gated MoS${_2}$ FETs with double-stack dielectric layers (AlOX+Al${_2}$O${_3}$), achieving critical breakdown field strengths of 7 MV/cm and improved mobility compared with the back gate configuration. In summary, we present a PEALD process that offers a scalable and low-damage solution for dielectric deposition on 2DMs, opening new possibilities for precise tuning of device characteristics in heterogeneous electronic circuits.https://papers.cool/arxiv/2408.07229Insights into Polymer Electrolyte Stability and Reaction Pathways: A first-principle calculations study2024-08-15T00:00:00+00:00Kazem ZhourAndreas HeuerDiddo DiddensThis study investigates the electrochemical behavior and decomposition pathways of four monomers, namely PMC, PMC-OH, PeMC-OH, and DEO-EA, which are potential candidates for polymer electrolytes in solid-state batteries. Density functional theory calculations were employed to determine the oxidation and reduction potentials of these monomers near different ions (Li+, TFSI-, and LiTFSI) and their corresponding reorganization energies. The results reveal notable sensitivity of the monomers to reduction in a Li+ rich regime and to oxidation in a TFSI- rich regime. Additionally, the decomposition pathways of the monomers were investigated, focusing on the cleavage of CO bonds. The findings provide insights into the stability and reactivity of these monomers in various electrochemical environments.https://papers.cool/arxiv/2408.07415Polymeric Properties of Higher-Order G-Quadruplex Telomeric Structures: Effects of Chemically Inert Crowders2024-08-15T00:00:00+00:00Deniz MostaracMattia TrapellaLuca BertiniLucia ComezAlessandro PaciaroniCristiano De MicheleG-quadruplexes are non-canonical DNA structures rather ubiquitous in human genome, which are thought to play a crucial role in the development of 85-90 % of cancers. Here, we present a novel coarse-grained approach in modeling G-quadruplexes which accounts for their structural flexibility. We apply it to study the polymeric properties of G-quadruplex multimers, with and without crowder particles, to mimic in-vivo conditions. We find that, contrary to some suggestions found in the literature, long G-quadruplex multimers are rather flexible polymeric macromolecules, with a local persistence length comparable to monomer size, exhibiting chain stiffness variation profile consistent with a real polymer in good solvent. Moreover, in a crowded environment (up to 10% volume fraction), we report that G-quadruplex multimers exhibit an increased propensity for coiling, with a corresponding decrease in the measured chain stiffness. Accurately accounting for the polymeric properties of G4 multimers is crucial for understanding their interactions with anticancer G4-targeting drugs, thereby significantly enhancing the design and effectiveness of these drugs.https://papers.cool/arxiv/2408.07466Forming and Compliance-free Operation of Low-power, Fast-switching HfO$_x$S$_y$/HfS$_2$ Heterostructure Memristors2024-08-15T00:00:00+00:00Aferdita XhameniAbdulAziz AlMutairiXuyun GuoIrina ChircăTianyi WenStephan HofmannValeria NicolosiAntonio LombardoWe demonstrate low power, forming and compliance-free operation of a resistive memory obtained by the partial oxidation of a two-dimensional layered van-der-Waals semiconductor: hafnium disulfide (HfS$_2$). Semiconductor - oxide heterostructures are achieved by low temperature ($<300^{o}$C) thermal oxidation of HfS$_2$ in dry conditions, carefully controlling process parameters such as pressure, temperature and oxygen flow. The resulting HfO$_x$S$_y$/HfS$_2$ heterostructures are integrated between metal contacts, forming vertical crossbar devices. Forming-free, compliance-free resistive switching between two non-volatile states is demonstrated by applying voltage sweeps. By applying voltage pulses and measuring the current response in time, we show non-volatile memory operation programmable by 60ns, $<$ 20pJ WRITE and ERASE operations. Multiple stable resistance states are achievable by pulse width and amplitude modulation demonstrating the capability for multi-state programming. Resistance states were retained without fail at 85$^o$C and 150$^o$C, showcasing the potential of these devices for long retention times. Using a technology computer-aided design (TCAD) tool (Synopsys Sentaurus, 2022), we explore the role of the semiconductor layer in tuning the device conductance and driving gradual resistive switching in 2D HfO$_x$ - based devices.https://papers.cool/arxiv/2408.07523Physics-based Analytical Modeling of CMOS Latchup2024-08-15T00:00:00+00:00Gennady I. ZebrevAnalysis of the steady-state Kirchhoff equations within the framework of a new physics-based equivalent circuit provides explicit expressions for the holding voltage and current for the resistive mode in bi-stable CMOS structures. The resulting expressions are functions of the physical parameters (temperature, doping level of the substrate, material band gap), which makes it possible to evaluate the influence of technological factors on the latchup parameters. In particular, an explicit formula was obtained for the critical charge for single event latchup as a function of process parameters and temperature.https://papers.cool/arxiv/2408.07637Hierarchical Working Memory and a New Magic Number2024-08-15T00:00:00+00:00Weishun ZhongMikhail KatkovMisha TsodyksThe extremely limited working memory span, typically around four items, contrasts sharply with our everyday experience of processing much larger streams of sensory information concurrently. This disparity suggests that working memory can organize information into compact representations such as chunks, yet the underlying neural mechanisms remain largely unknown. Here, we propose a recurrent neural network model for chunking within the framework of the synaptic theory of working memory. We showed that by selectively suppressing groups of stimuli, the network can maintain and retrieve the stimuli in chunks, hence exceeding the basic capacity. Moreover, we show that our model can dynamically construct hierarchical representations within working memory through hierarchical chunking. A consequence of this proposed mechanism is a new limit on the number of items that can be stored and subsequently retrieved from working memory, depending only on the basic working memory capacity when chunking is not invoked. Predictions from our model were confirmed by analyzing single-unit responses in epileptic patients and memory experiments with verbal material. Our work provides a novel conceptual and analytical framework for understanding the on-the-fly organization of information in the brain that is crucial for cognition.https://papers.cool/arxiv/2408.07649Creating two-qudit maximally entangled quantum link through bulk2024-08-15T00:00:00+00:00Keshav Das AgarwalSudip Kumar HaldarAditi Sen DeWe design a set-up for creating maximally entangled two-qudit links between distant nodes which are weakly coupled with interacting spin-s bulk (processor). We exhibit that such quantum links of arbitrary spin quantum number can be formed when the system is prepared at a very low temperature. We find that the Heisenberg and the bilinear-biquadratic (BBQ) spin-s models are the potential candidates to achieve the maximal entanglement in equilibrium. By eliminating the equilibrium requirement, we show that a completely polarized state in the bulk and a suitable qudit state in the link can evolve over time to produce a highly entangled state, as per the BBQ Hamiltonian with nearest- and next-nearest neighbor interactions. When the number of sites in the bulk grows, so does the maximum entanglement produced in dynamics. Further, both the static and the dynamical protocols presented here remain efficient even if the spin quantum numbers of the bulk and the connection are unequal.https://papers.cool/arxiv/2408.07664Deceleration of electrons by an oscillating field2024-08-15T00:00:00+00:00O. V. KibisQuantum corrections to electron dynamics under an oscillating electromagnetic field are found within the Floquet theory of periodically driven quantum systems. It is demonstrated that emission of photons by an electron oscillating under the field is asymmetric with respect to the direction of its forward movement. Since emission of each photon is accompanied by momentum transfer to the electron, such a skew emission leads to the quantum recoil force decelerating the electron. Possible manifestations of this phenomenon are discussed for various electronic systems driven by laser irradiation.https://papers.cool/arxiv/2408.07111Vestigial Gapless Boson Density Wave Emerging between $ν= 1/2$ Fractional Chern Insulator and Finite-Momentum Supersolid2024-08-15T00:00:00+00:00Hongyu LuHan-Qing WuBin-Bin ChenZi Yang MengThe roton-triggered charge-density-wave (CDW)is widely studied in fractional quantum Hall (FQH) and fractional Chern insulator (FCI) systems, and there also exist field theoretical and numerical realizations of continuous transition from FCI to superfluid (SF). However, the theory and numerical explorations of the transition between FCI and supersolid (SS) are still lacking. In this work, we study the topological flat-band lattice models with $\nu$ = 1/2 hard-core bosons, where the previous studies have discovered the existence of FCI states and possible direct FCI-SS transitions. While the FCI is robust, we find the direct FCI-SS transition is absent, and there exist more intriguing scenarios. In the case of checkerboard lattice, we find an intermediate gapless CDW state without SF, sandwiched between FCI and SS. This novel state is triggered by the roton instability in FCI and it further continuously brings about the intertwined finite-momentum SF fluctuation when the CDW order is strong enough, eventually transiting into an unconventional finite-momentum SS state. The intermediate gapless CDW state is a vestige from the SS state, since the increasing quantum fluctuation melts only the Larkin-Ovchinnikov-type SF order in SS but its (secondary) product -- the CDW order -- survives. On honeycomb lattice, we find no evidence of SS, but discover an interesting sequence of FCI-Solid I-Solid II transitions, with both solids incompressible. Moreover, in contrast to previous single-roton condensation, this sequence of FCI-Solid I-Solid II transitions is triggered by the softening of multi-roton modes in FCI. Considering the intertwined wave vectors of the CDW orders, Solid I is a vestige of Solid II. Our work provides new horizon not only for the quantum phase transitions in FCI but also for the intertwined orders and gapless states in bosonic systems, which will inspire future studies.https://papers.cool/arxiv/2408.07125Emergent Gauge Fields and the "Choi-Spin Liquids" in Steady States2024-08-15T00:00:00+00:00Kaixiang SuYimu BaoCenke XuWe demonstrate that the steady states of the evolution of a class of Lindbladians can be mapped to the "Gutzwiller projected" wave functions in the doubled Hilbert space, i.e. the representation of the density matrix through the Choi-Jamiolkowski isomorphism. A Gutzwiller projection is expected to introduce emergent dynamical gauge fields to the system, hence if one starts with a gapless free fermion pure quantum state, the steady state of the Lindbladian evolution in the doubled Hilbert space is an analog of an algebraic spin liquid, which is dubbed the "Choi-spin liquid". The Choi-spin liquid can also be produced through strong measurement without post-selection. Predictions of the Choi-spin liquids can be made based on the understanding from the studies on spin liquids, and we will design the experimental protocol to test these predictions. We also demonstrate that if one starts with a Chern insulator, the steady state of the Lindbladian evolution is expected to have a spontaneous "strong-to-weak" U(1) symmetry breaking, which corresponds to a superconductor in the doubled Hilbert space.https://papers.cool/arxiv/2408.07138The surface termination of a Fe (III) spin crossover molecular salt2024-08-15T00:00:00+00:00M. Zaid ZazBinny TamangKayleigh McElvenEsha MishraGauthami ViswanWai Kiat ChinArjun SubediAlpha T. Ń DaiyeRebecca LaiPeter A. DowbenFrom a comparison of energy dispersive analyses of X-rays (EDAX), the known molecular stoichiometry and X-ray photoemission spectroscopy (XPS), it is evident that the Fe(III) spin crossover salt [Fe(qsal)2Ni(dmit)2] has a preferential surface termination with the Ni(dmit)2 moiety. This preferential surface termination leads to a significant surface to bulk core level shift for the Ni 2p X-ray photoemission core level, not seen in the corresponding Fe 2p core level spectra. Inverse photoemission spectroscopy (IPES), thus provides some indication of the density of states resulting from the dmit2 = 1,3-dithiol-2-thione-4,5-dithiolato ligand unoccupied molecular orbitals.https://papers.cool/arxiv/2408.07148Misalignment-robust zigzag gate geometry for valley filtering with helical point contacts2024-08-15T00:00:00+00:00Antonio L. R. ManescoMany experimental works reported the generation of valley-polarized currents in two-dimensional materials. However, most efforts require the application of external magnetic fields. Gate-defined valley-helical narrow channels offer a magnetic field-free approach to generate valley currents. However, achieving perfect helical transport in such gate-defined devices remains challenging due to stringent requirements for gate alignment. Misalignments lead to the presence of non-helical states that suppress the efficiency of these devices. Here, we propose an alternative gate layout to overcome the fabrication challenges. Our layout creates a series of helical quantum point contacts that suppress the transmission of non-helical modes. We show that such a layout can be implemented with four layers of independent gates or two layers of split gates. Thus, our approach offers a robust magnetic field-free platform to generate valley-polarized currents.https://papers.cool/arxiv/2408.07158Dynamical kinetic energy quenching in the antiferromagnetic quantum critical metals2024-08-15T00:00:00+00:00Anton BorissovVladimir CalveraSung-Sik LeeWe study the dynamics of critical spin fluctuations and hot electrons at the metallic antiferromagnetic quantum critical points with $Z_2$ and $O(2)$ spin symmetries, building upon earlier works on the $O(3)$ symmetric theory. The interacting theories in $2+1$ dimensions are approached from $3+1$-dimensional theories in the $\epsilon$-expansion that tunes the co-dimension of Fermi surface as a control parameter. The low-energy physics of the $Z_2$ and $O(2)$ theories qualitatively differ from each other and also from that of the $O(3)$ theory. The difference is caused by higher-order quantum corrections beyond the one-loop order that are important even to the leading order in $\epsilon$. The naive loop-expansion breaks down due to dynamical quenching of kinetic energy: the speed of the collective mode ($c$) and the Fermi velocity perpendicular to the magnetic ordering vector ($v$) become vanishingly small at low energies. What sets the three theories apart is the hierarchy that emerges between the quenched kinetic terms. At the infrared fixed point, $c/v$ becomes $0$, $1$ and $\infty$ in the $Z_2$, $O(2)$ and $O(3)$ theories, respectively. At intermediate energy scales, the slow renormalization group (RG) flows of $c$ and $v$ toward their fixed point values create approximate scale invariance controlled by approximate marginal parameters. The manifold of those quasi-fixed points and the RG flow therein determines crossovers from scaling behaviours with transient critical exponents at intermediate energy scales to the universal scaling in the low-energy limit. If the symmetry group is viewed as a tuning parameter, the $O(2)$ theory corresponds to a multi-critical point which has one additional quasi-marginal parameter than the other two theories.https://papers.cool/arxiv/2408.07179Kinetomagnetism of chirality and its applications2024-08-15T00:00:00+00:00Sang-Wook Cheongand Fei-Ting HuangChiral functionalities exhibited by systems lacking any mirror symmetry encompass natural optical activity, magnetochiral effect, diagonal current-induced magnetization, chirality-selective spin-polarized current of charged electrons or neutral neutrons, self-inductance, and chiral phonons. These phenomena are unified under the hypothesis of kinetomagnetism of chirality, which posits that any moving (charged or neutral) object in chiral systems induces magnetization in its direction of motion, consequently imparting chirality to the object due to this induced magnetization. We also found conjugate relationships among the kinetomagnetism of chirality, linear magnetoelectricity, and electric field induced directional nonreciprocity, highlighting their interconnections with magnetic, electric, and toroidal orders. The concept of the kinetomagnetism of chirality will be an essential basis for the theoretical understanding of known chiral phenomena such as natural optical activity or chiral phonons, and also the discovery of unexplored chiral functionalities.https://papers.cool/arxiv/2408.07189The effect of mixed termination composition in Sc, Ti, and V-based MXenes2024-08-15T00:00:00+00:00Michal NovotnýKarolína TkáčováFrantišek KarlickýIn this study, we investigate the effect of mixed surface terminations (F, O, OH) on the properties of M$_{2}$C MXenes (M = Sc, Ti, V). We explore how different compositions and patterns of terminal groups affect the stability and electronic properties of these 2D materials. The bond dissociation energies and cohesion energies show a clear preference for F-terminations in Sc$_{2}$C, while Ti- and V-based MXenes prefer O-terminations. The data indicates that terminal groups on opposite sides of the MXene have little to no influence on each other's electronic structure, allowing for independent chemical environments on each side. Semiconducting forms of studied MXenes (Sc$_{2}$CF$_{2}$, Sc$_{2}$C(OH)$_{2}$ and Ti$_{2}$CO$_{2}$) showed very high sensitivity to conduction-inducing terminations (O, O, and F, respectively) with even minuscule amounts ($\approx$1%) causing the materials to become conductive. This high sensitivity of the band gap to surface terminations may offer an explanation for the challenges in synthesizing semiconducting forms of MXenes.https://papers.cool/arxiv/2408.07197Hybrid Magnonics with Localized Spoof Surface Plasmon Polaritons2024-08-15T00:00:00+00:00Yuzan XiongAndrew ChristyZixin YanAmin PishehvarMuntasir MahdiJunming WuJames F. CahoonBinbin YangMichael C. HamiltonXufeng ZhangWei ZhangHybrid magnonic systems have emerged as a promising direction for information propagation with preserved coherence. Due to high tunability of magnons, their interactions with microwave photons can be engineered to probe novel phenomena based on strong photon-magnon coupling. Improving the photon-magnon coupling strength can be done by tuning the structure of microwave resonators to better interact with the magnon counterpart. Planar resonators have been explored due to their potential for on-chip integration, but only common modes from stripline-based resonators have been used. Here, we present a microwave spiral resonator supporting the spoof localized surface plasmons (LSPs) and implement it to the investigation of photon-magnon coupling for hybrid magnonic applications. We showcase strong magnon-LSP photon coupling using a ferrimagnetic yttrium iron garnet sphere. We discuss the dependence of the spiral resonator design to the engineering capacity of the photon mode frequency and spatial field distributions, via both experiment and simulation. By the localized photon mode profiles, the resulting magnetic field concentrates near the surface dielectrics, giving rise to an enhanced magnetic filling factor. The strong coupling and large engineering space render the spoof LSPs an interesting contender in developing novel hybrid magnonic systems and functionalities.https://papers.cool/arxiv/2408.07198Experimental tests of the full spin torque conductivity tensor in epitaxial IrO2 thin films2024-08-15T00:00:00+00:00Michael PattonDaniel A. PharisGautam GurungXiaoxi HuangGahee NohEvgeny Y. TsymbalSi-Young ChoiDaniel C. RalphMark S. RzchowskiChang-Beom EomUnconventional spin-orbit torques arising from electric-field-generated spin currents in anisotropic materials have promising potential for spintronic applications, including for perpendicular magnetic switching in high-density memory applications. Here we determine all the independent elements of the spin torque conductivity tensor allowed by bulk crystal symmetries for the tetragonal conductor IrO2, via measurements of conventional (in plane) antidamping torques for IrO2 thin films in the high-symmetry (001) and (100) orientations. We then test that rotational transformations of this same tensor can predict both the conventional and unconventional anti-damping torques for IrO2 thin films in the lower-symmetry (101), (110), and (111) orientations, finding good agreement. The results confirm that spin-orbit torques from all these orientations are consistent with the bulk symmetries of IrO2, and show how simple measurements of conventional torques from high-symmetry orientations of anisotropic thin films can provide an accurate prediction of the unconventional torques from lower-symmetry orientations.https://papers.cool/arxiv/2408.07203Failure of the Crystalline Equivalence Principle for Weak Free Fermions2024-08-15T00:00:00+00:00Daniel SheinbaumOmar Antolín-CamarenaInteracting crystalline SPT phases were first classified by Thorngren and Else through the crystalline equivalence principle, suggesting that a spatial group symmetry can be treated as if it were an internal symmetry group. Using techniques from topology we elucidate how this principle holds for one of the proposals for the interacting bosonic case and yet fails for weak free fermion phases. Last we show how a variant of the principle does hold for strong crystalline free fermion phases.https://papers.cool/arxiv/2408.07213Representation-space diffusion models for generating periodic materials2024-08-15T00:00:00+00:00Anshuman SinhaShuyi JiaVictor FungGenerative models hold the promise of significantly expediting the materials design process when compared to traditional human-guided or rule-based methodologies. However, effectively generating high-quality periodic structures of materials on limited but diverse datasets remains an ongoing challenge. Here we propose a novel approach for periodic structure generation which fully respect the intrinsic symmetries, periodicity, and invariances of the structure space. Namely, we utilize differentiable, physics-based, structural descriptors which can describe periodic systems and satisfy the necessary invariances, in conjunction with a denoising diffusion model which generates new materials within this descriptor or representation space. Reconstruction is then performed on these representations using gradient-based optimization to recover the corresponding Cartesian positions of the crystal structure. This approach differs significantly from current methods by generating materials in the representation space, rather than in the Cartesian space, which is made possible using an efficient reconstruction algorithm. Consequently, known issues with respecting periodic boundaries and translational and rotational invariances during generation can be avoided, and the model training process can be greatly simplified. We show this approach is able to provide competitive performance on established benchmarks compared to current state-of-the-art methods.https://papers.cool/arxiv/2408.07216Extreme Enhancement-Mode Operation Accumulation Channel Hydrogen-Terminated Diamond FETs with $V_{th} < -6V$ and High On-Current2024-08-15T00:00:00+00:00Chunlin QuIsha MainiQing GuoAlastair StaceyDavid A. J. MoranIn this work we demonstrate a new Field Effect Transistor device concept based on hydrogen-terminated diamond (H-diamond) that operates in an Accumulation Channel rather than Transfer Doping regime. Our FET devices demonstrate both extreme enhancement-mode operation and high on-current with improved channel charge mobility compared to Transfer-Doped equivalents. Electron-beam evaporated $Al_2O_3$ is used on H-diamond to suppress the Transfer Doping mechanism and produce an extremely high ungated channel resistance. A high-quality H-diamond surface with an unpinned Fermi level is crucially achieved, allowing for formation of a high-density hole accumulation layer by gating the entire device channel which is encapsulated in dual-stacks of $Al_2O_3$. Completed devices with gate/channel length of $1 \mu m$ demonstrate record threshold voltage $< -6 V$ with on-current $> 80 mA/mm$. Carrier density and mobility figures extracted by CV analysis indicate high 2D charge density of $~ 2 \times 10^{12} cm^{-2}$ and increased hole mobility of $110 cm^2 /V \cdot s$ in comparison with more traditional Transfer-Doped H-diamond FETs. These results demonstrate the most negative threshold voltage yet reported for H-diamond FETs and highlight a new strategy for the development of high-performance power devices that better exploit diamond's intrinsic dielectric properties and high hole mobility.https://papers.cool/arxiv/2408.07257Competing addition processes give distinct growth regimes in the assembly of 1D filaments2024-08-15T00:00:00+00:00Sk Ashif AkramTyler BrownJeremy D. SchmitWe present a model to describe the concentration-dependent growth of protein filaments. Our model contains two states, a low entropy/high affinity ordered state and a high entropy/low affinity disordered state. Consistent with experiments, our model shows a diffusion-limited linear growth regime at low concentration, followed by a concentration independent plateau at intermediate concentrations, and rapid disordered precipitation at the highest concentrations. We show that growth in the linear and plateau regions is the result of two processes that compete amid the rapid binding and unbinding of non-specific states. The first process is the addition of ordered molecules during the periods where the end of the filament is free of incorrectly bound molecules. The second process is the capture of defects, which occurs when consecutive ordered additions occur on top of incorrectly bound molecules. We show that a key molecular property is the probability that a diffusive collision results in a correctly bound state. Small values of this probability suppress the defect capture growth mode, resulting in a plateau in the growth rate when incorrectly bound molecules become common enough to poison ordered growth. We show that conditions that non-specifically suppress or enhance intermolecular interactions, such as the addition of depletants or osmolytes, have opposite effects on the growth rate in the linear and plateau regimes. In the linear regime stronger interactions promote growth by reducing dissolution events, but in the plateau regime stronger interactions inhibit growth by stabilizing incorrectly bound molecules.https://papers.cool/arxiv/2408.07270Orientation-dependent surface radiation damage in $β$-Ga2O3 explored by multiscale atomic simulations2024-08-15T00:00:00+00:00Taiqiao LiuZeyuan LiJunlei ZhaoXiaoyu FeiJiaren FengYijing ZuoMengyuan HuaYuzheng GuoSheng LiuZhaofu ZhangUltrawide bandgap semiconductor $\beta$-Ga2O3 holds extensive potential for applications in high-radiation environments. One of the primary challenges in its practical application is unveiling the mechanisms of surface irradiation damage under extreme conditions. In this study, we investigate the orientation-dependent mechanisms of radiation damage on four experimentally relevant $\beta$-Ga2O3 surface facets, namely, (100), (010), (001), and (-201), at various temperatures. We employ a multiscale atomic simulation approach, combining machine-learning-driven molecular dynamics (ML-MD) simulations and density functional theory (DFT) calculations. The results reveal that Ga vacancies and O interstitials are the predominant defects across all four surfaces, with the formation of many antisite defects Ga_O and few O_Ga observed. Among the two Ga sites and three O sites, the vacancy found in the O2 site is dominant, while the interstitials at the Ga1 and O1 sites are more significant. Interestingly, the (010) surface exhibits the lowest defect density, owing to its more profound channeling effect leading to a broader spread of defects. The influence of temperature on surface irradiation damage of $\beta$-Ga2O3 should be evaluated based on the unique crystal surface characteristics. Moreover, the formation energy and defect concentration calculated by DFT corroborate the results of the MD simulations. Comprehending surface radiation damage at the atomic level is crucial for assessing the radiation tolerance and predicting the performance changes of $\beta$-Ga2O3-based device in high-radiation environments.https://papers.cool/arxiv/2408.07289Efficient driving of a spin-qubit using single-atom magnets2024-08-15T00:00:00+00:00Jose Reina-GálvezHoang-Anh LeHong Thi BuiSoo-hyon PharkNicolás LorenteChristoph WolfThe realization of electron-spin resonance at the single-atom level using scanning tunneling microscopy has opened new avenues for coherent quantum sensing and quantum state manipulation at the ultimate size limit. This allows to build many-body Hamiltonians and the study of their complex physical behavior. Recently, a novel qubit platform has emerged from this field, raising questions about the driving mechanism from single-atom magnets. In this work, we demonstrate how single-atom magnets can be used to drive a nearby single spin qubit efficiently, while also addressing critical aspects related to the optimization of experimental parameters.https://papers.cool/arxiv/2408.07308Interlayer excitons in double-layer transition metal dichalcogenides quantum dots2024-08-15T00:00:00+00:00Xiang LiuZheng TaoWenchen LuoTapash ChakrabortyVarious properties of interlayer excitons in double-layer transition metal dichalcogenides quantum dots are analyzed using a low-energy effective Hamiltonian with Coulomb interaction. We solve the single-particle Hamiltonian with and without a magnetic field analytically, then present the electron-hole pairing features of interlayer exciton by employing the exact diagonalization technique, where the electron and hole are located in two layers respectively. In a magnetic field, the Landau level gap, as well as the electron-hole separation of an exciton varies non-monotonously as the interlayer distance increases, attributed to the pseudospin-orbit coupling which also leads to the emergence of topological non-trivial pseudospin textures in the exciton states. We examine the influence of different materials in quantum dots stacking on the exciton states, comparing their impact to variations in layer distances and quantum dot sizes. We further explore two interacting interlayer excitons numerically. The binding energy is significantly enhanced by the exchange interaction when the two electrons have different spins. The optical absorption spectra from the ground state to low-lying excited states reveal distinct behaviors for different interlayer excitons, which can be utilized to distinguish the spin of electrons in excitons. Our results highlight the potential for controlling interlayer excitons and applications of optical devices in a magnetic field and tunable layer distance.https://papers.cool/arxiv/2408.07310Improving the Electro-Optical Properties of MoS$_2$/rGO Hybrid Nanocomposites Using Liquid Crystals2024-08-15T00:00:00+00:00A. VasilevY. MelikyanM. ZhezhuV. HayrapetyanM. S. TorosyanD. A. GhazaryanM. YeranosyanH. GharagulyanHybrid systems of two-dimensional (2D) materials (such as graphene-family materials and 2D transition metal dichalcogenides) are attracting much attention due to their distinctive optoelectronic, thermal, mechanical, and chemical properties. The application perspectives of these materials in various fields further expand when enriching those with liquid crystals (LCs) primarily due to their enhanced tunability and functionality. In this study, we report on the hydrothermal synthesis of hybrid nanocomposites composed of MoS$_2$ and rGO and discuss tuning possibilities of their electro-optical properties by incorporating thermotropic LCs. In particular, we demonstrate that the incorporation of 5CB LC increases the sensitivity and charge storage efficiency of the hybrid nanocomposites. In addition, we also present the responsivity, detectivity, and response time properties of the hybrid nanocomposites of MoS$_2$/rGO, both with and without the inclusion of nematic LCs. Furthermore, we demonstrate that the system exhibits a 5CB-induced photocurrent switching effect. We believe the findings will open new doors for applications of these materials in optoelectronics and photonics.https://papers.cool/arxiv/2408.07338Symmetric n-and p-Type Sub-5-nm 1D Graphene Nanoribbon Transistors for Homogeneous CMOS Applications2024-08-15T00:00:00+00:00Linqiang XuShiqi LiuQiuhui LiYing LiShibo FangYing GuoYee Sin AngChen YangJing LuGraphene nanoribbon (GNR) emerges as an exceptionally promising channel candidate due to its tunable sizable bandgap (0-3 eV), ultrahigh carrier mobility (up to 4600 cm^(2) V^(-1) s^(-1)), and excellent device performance (current on-off ratio of 10^(7)). However, the asymmetry of reported n-type and p-type GNR field-effect transistors (FETs) at ultrashort gate length (Lg) has become an obstacle to future complementary metal-oxide-semiconductor (CMOS) integration. Here, we conduct ab initio quantum transport simulations to investigate the transport properties of sub-5-nm Lg 7 armchair-edge GNR (7 AGNR) FETs. The on-state current, delay time, and power dissipation of the n-type and p-type 7 AGNR FETs fulfill the International Technology Roadmap for Semiconductors targets for high-performance devices when Lg is reduced to 3 nm. Remarkably, the 7 AGNR FETs exhibit superior n-type and p-type symmetry to the 7-9-7 AGNR FETs due to the more symmetrical electron/hole effective masses. Compared to the monolayer MoS2 and MoTe2 counterparts, the 7 AGNR FETs have better device performance, which could be further improved via gate engineering. Our results shed light on the immense potential of 7 AGNR in advancing CMOS electronics beyond silicon.https://papers.cool/arxiv/2408.07339Bilayer TeO2: The First Oxide Semiconductor with Symmetric Sub-5-nm NMOS and PMOS2024-08-15T00:00:00+00:00Linqiang XuLiya ZhaoChit Siong LauPan ZhangLianqiang XuQiuhui LiShibo FangYee Sin AngXiaotian SunJing LuWide bandgap oxide semiconductors are very promising channel candidates for next-generation electronics due to their large-area manufacturing, high-quality dielectrics, low contact resistance, and low leakage current. However, the absence of ultra-short gate length (Lg) p-type transistors has restricted their application in future complementary metal-oxide-semiconductor (CMOS) integration. Inspired by the successfully grown high-hole mobility bilayer (BL) beta tellurium dioxide (\b{eta}-TeO2), we investigate the performance of sub-5-nm-Lg BL \b{eta}-TeO2 field-effect transistors (FETs) by utilizing first-principles quantum transport simulation. The distinctive anisotropy of BL \b{eta}-TeO2 yields different transport properties. In the y-direction, both the sub-5-nm-Lg n-type and p-type BL \b{eta}-TeO2 FETs can fulfill the International Technology Roadmap for Semiconductors (ITRS) criteria for high-performance (HP) devices, which are superior to the reported oxide FETs (only n-type). Remarkably, we for the first time demonstrate the existence of the NMOS and PMOS symmetry in sub-5-nm-Lg oxide semiconductor FETs. As to the x-direction, the n-type BL \b{eta}-TeO2 FETs satisfy both the ITRS HP and low-power (LP) requirements with Lg down to 3 nm. Consequently, our work shed light on the tremendous prospects of BL \b{eta}-TeO2 for CMOS application.https://papers.cool/arxiv/2408.07342Evidence of P-wave Pairing in K2Cr3As3 Superconductors from Phase-sensitive Measurement2024-08-15T00:00:00+00:00Zhiyuan ZhangZiwei DouAnqi WangCuiwei ZhangYu HongXincheng LeiYue PanZhongchen XuZhipeng XuYupeng LiGuoan LiXiaofan ShiXingchen GuoXiao DengZhaozheng LyuPeiling LiFaming QuGuangtong LiuDong SuKun JiangYouguo ShiLi LuJie ShenJiangping HuP-wave superconductors hold immense promise for both fundamental physics and practical applications due to their unusual pairing symmetry and potential topological superconductivity. However, the exploration of the p-wave superconductors has proved to be a complex endeavor. Not only are they rare in nature but also the identification of p-wave superconductors has been an arduous task in history. For example, phase-sensitive measurement, an experimental technique which can provide conclusive evidence for unconventional pairing, has not been implemented successfully to identify p-wave superconductors. Here, we study a recently discovered family of superconductors, A2Cr3As3 (A = K, Rb, Cs), which were proposed theoretically to be a candidate of p-wave superconductors. We fabricate superconducting quantum interference devices (SQUIDs) on exfoliated K2Cr3As3, and perform the phase-sensitive measurement. We observe that such SQUIDs exhibit a pronounced second-order harmonic component sin(2{\phi}) in the current-phase relation, suggesting the admixture of 0- and {\pi}-phase. By carefully examining the magnetic field dependence of the oscillation patterns of critical current and Shapiro steps under microwave irradiation, we reveal a crossover from 0- to {\pi}-dominating phase state and conclude that the existence of the {\pi}-phase is in favor of the p-wave pairing symmetry in K2Cr3As3.https://papers.cool/arxiv/2408.07345Missing spectral weight in a paramagnetic heavy-fermion system2024-08-15T00:00:00+00:00Jingwen LiDebankit PriyadarshiChia-Jung YangUlli PohlOliver StockertHilbert von LoehneysenShovon PalManfred FiebigJohann KrohaThe competition between the Kondo spin-screening effect and the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction in heavy-fermion systems drives the quantum phase transition between the magnetically ordered and the heavy-Fermi-liquid ground states. Despite intensive investigations of heavy quasiparticles on the Kondo-screened side of the quantum phase transition and of their breakdown at the quantum critical point, studies on the magnetically ordering side are scarce. Using terahertz time-domain spectroscopy, we report a suppression of the Kondo quasiparticle weight in CeCu6-xAux samples on the antiferromagnetic side of the quantum phase transition at temperatures as much as two orders of magnitude above the Neel temperature TN. The suppression results from a quantum frustration effect induced by the temperature-independent RKKY interaction. Hence, our results emphasize that besides critical fluctuations, the RKKY interaction may play an important role in the quantum-critical scenario.https://papers.cool/arxiv/2408.07346Enabling microrobotic chemotaxis via reset-free hierarchical reinforcement learning2024-08-15T00:00:00+00:00Tongzhao XiongZhaorong LiuChong Jin OngLailai ZhuMicroorganisms have evolved diverse strategies to propel in viscous fluids, navigate complex environments, and exhibit taxis in response to stimuli. This has inspired the development of synthetic microrobots, where machine learning (ML) is playing an increasingly important role. Can ML endow these robots with intelligence resembling that developed by their natural counterparts over evolutionary timelines? Here, we demonstrate chemotactic navigation of a multi-link articulated microrobot using two-level hierarchical reinforcement learning (RL). The lower-level RL allows the robot -- featuring either a chain or ring topology -- to acquire topology-specific swimming gaits: wave propagation characteristic of flagella or body oscillation akin to an ameboid. Such flagellar and ameboid microswimmers, further enabled by the higher-level RL, accomplish chemotactic navigation in prototypical biologically-relevant scenarios that feature conflicting chemoattractants, pursuing a swimming bacterial mimic, steering in vortical flows, and squeezing through tight constrictions. Additionally, we achieve reset-free, partially observable RL, where the robot observes only its joint angles and local scalar quantities. This advancement illuminates solutions for overcoming the persistent challenges of manual resets and partial observability in real-world microrobotic RL.https://papers.cool/arxiv/2408.07351Visualizing $p$-orbital texture in the charge-density-wave state of CeSbTe2024-08-15T00:00:00+00:00Xinglu QueQingyu HeLihui ZhouShiming LeiLeslie SchoopDennis HuangHidenori TakagiThe collective reorganization of electrons into a charge density wave (CDW) inside a crystal has long served as a textbook example of an ordered phase in condensed matter physics. Two-dimensional square lattices with $p$ electrons are well-suited to the realization of CDW, due to the anisotropy of the $p$ orbitals and the resulting one dimensionality of the electronic structure. In spite of a long history of study of CDW in square-lattice systems, few reports have recognized the existence and significance of a hidden orbital degree of freedom. The degeneracy of $p_x$ and $p_y$ electrons inherent to a square lattice may give rise to nontrivial orbital patterns in real space that endow the CDW with additional broken symmetries or unusual order parameters. Using scanning tunneling microscopy, we visualize signatures of $p$-orbital texture in the CDW state of the topological semimetal candidate CeSbTe, which contains Sb square lattices with 5$p$ electrons. We image atomic-sized, anisotropic lobes of charge density with periodically modulating anisotropy, that ultimately can be mapped onto a microscopic pattern of $p_x$ and $p_y$ bond density waves. Our results show that even delocalized $p$ orbitals can reorganize into unexpected and emergent electronic states of matter.https://papers.cool/arxiv/2408.07355Non-Hermitian Quantum Fractals2024-08-15T00:00:00+00:00Junsong SunChang-An LiQingyang GuoWeixuan ZhangShiping FengXiangdong ZhangHuaiming GuoBjörn TrauzettelThe first quantum fractal discovered in physics is the Hofstadter butterfly. It stems from large external magnetic fields. We discover instead a new class of non-Hermitian quantum fractals (NHQFs) emerging in coupled Hatano-Nelson models on a tree lattice in absence of any fields. Based on analytic solutions, we are able to rigorously identify the self-similar recursive structures in energy spectrum and wave functions. We prove that the complex spectrum of NHQFs bears a resemblance to the Mandelbrot set in fractal theory. The self-similarity of NHQFs is rooted in the interplay between the iterative lattice configuration and non-Hermiticity. Moreover, we show that NHQFs exist in generalized non-Hermitian systems with iterative lattice structures. Our findings open a new avenue for investigating quantum fractals in non-Hermitian systems.https://papers.cool/arxiv/2408.07381Nematic and smectic phases with proper ferroelectric order2024-08-15T00:00:00+00:00Grant J. StrachanEwa GóreckaJadwiga SzydłowskaAnna MakalDamian PociechaA material showing a sequence of three ferroelectric liquid crystalline phases below the paraelectric nematic phase has been synthesized and studied. The polar order of molecules appearing due to the dipole-dipole interactions in the NF phase is preserved also in the smectic phases: orthogonal SmAF and tilted SmCF. The ferroelectric ground state of both smectic phases was confirmed by their second harmonic generation activity and polarization switching. In SmCF phase polarization becomes oriented to electric field by decreasing the tilt angle to zero. Although both smectic phases are ferroelectric in nature, their dielectric response was found to be very different.https://papers.cool/arxiv/2408.07399Vacancy diffusion and the hydrodynamics of crystals2024-08-15T00:00:00+00:00Joel MabillardPierre GaspardThe hydrodynamics of crystals with vacancies is developed on the basis of local-equilibrium thermodynamics, where the chemical potential of vacancies plays a key role together with a constraint relating the concentration of vacancies to the density of mass and the strain tensor. The microscopic foundations are established, leading to Green-Kubo and Einstein-Helfand formulas for the transport coefficients, including the vacancy conductivities and the coefficients of vacancy thermodiffusion. As a consequence of having introduced the chemical potential of vacancies, a relationship is obtained between the conductivities and the Fickian diffusion coefficients for the vacancies. The macroscopic equations are linearized around equilibrium to deduce the dispersion relations of the eight hydrodynamic modes. The theoretical predictions are confirmed by numerical simulations of the hard-sphere crystal with vacancies. The study explicitly shows that the eighth hydrodynamic mode of nonperfect monatomic crystals is indeed a mode of vacancy diffusion.https://papers.cool/arxiv/2408.07406Skin effect in Non-Hermitian systems with spin2024-08-15T00:00:00+00:00Wenna ZhangYutao HuHongyi ZhangXiang LiuGeorgios VeronisYuecheng ShenYin HuangWenchen LuoAndrea Alu`The skin effect, where bulk modes collapse into boundary modes, is a key phenomenon in topological non-Hermitian systems, has been predominantly studied in spinless systems. Recent studies illustrate the magnetic suppression of the first-order skin effect while ignoring spin. However, the physical significance of a magnetic field in non-Hermitian skin effect with spin remains elusive. Here, we systematically explore non-Hermitian spinful systems based on generalized Hatano-Nelson models with SU(2) gauge potential fields. In an open one-dimensional lattice, the spin-up and spin-down states can be uniquely separated and localized at the two boundaries without magnetic field. When an external magnetic field is applied, the skin effect exhibits a smooth transition from bidirectional to unidirectional. Remarkably, we demonstrate that the first-order skin effect can be anomalously induced by a magnetic field in a topologically trivial non-Hermitian spinful system without any skin effect at zero field. The direction of such magnetically induced skin modes can be controlled by simply changing the amplitude and polarity of the magnetic field. In addition, we demonstrate a transition between non-Bloch PT and anti-PT symmetries in the system, and uncover the spindependent mechanism of non-Bloch PT symmetry. Our results pave the way for the investigation of non-Hermitian skin effect with spin degrees of freedom.https://papers.cool/arxiv/2408.07412Lateral Mn5Ge3 spin-valve in contact with a high-mobility Ge two-dimensional hole gas2024-08-15T00:00:00+00:00David WeißhauptChristoph SürgersDominik BloosHannes Simon FunkMichael OehmeGerda FischerMarkus Andreas SchubertChristian WengerJoris van SlagerenInga Anita FischerJörg SchulzeGe two-dimensional hole gases in strained modulation-doped quantum-wells represent a promising material platform for future spintronic applications due to their excellent spin transport properties and the theoretical possibility of efficient spin manipulation. Due to the continuous development of epitaxial growth recipes extreme high hole mobilities and low effective masses can be achieved, promising an efficient spin transport. Furthermore, the Ge two-dimensional hole gas (2DHG) can be integrated in the well-established industrial complementary metal-oxide-semiconductor (CMOS) devices technology. However, efficient electrical spin injection into a Ge 2DHG - a prerequisite for the realization of spintronic devices - has not yet been demonstrated. In this work, we report the fabrication and low-temperature magnetoresistance measurements of a laterally structured Mn5Ge3/Ge 2DHG/ Mn5Ge3 device. The ferromagnetic Mn5Ge3 contacts are grown directly into the Ge quantum well by means of an interdiffusion process with a spacing of approximately 130 nm. We observe a magnetoresistance signal for temperatures below 13 K possibly arising from successful spin injection. The results represent a step forward toward the realization of CMOS compatible spintronic devices based on a 2DHG.https://papers.cool/arxiv/2408.07451First-principles exploration of the pressure dependent physical properties of Sn4Au: a superconducting topological semimetal2024-08-15T00:00:00+00:00M. Abdul Hadi ShahM. I. NaherS. H. NaqibFirst-principles investigation within the density functional theory is utilized to explore the physical properties of a superconducting topological semimetal Sn4Au under pressure within the range of 0-5 GPa. According to the computed elastic moduli, the compound under study is classified as ductile and applied pressure enhances the ductility. The compound has very high level of dry lubricity and machinability index. All the anisotropy factors demonstrate an elastically anisotropic nature. The electronic properties are investigated in view of the electronic band structure and density of states. The band structure reveals the topological semimetallic feature of Sn4Au while the density of states at the Fermi level decreases gradually with increasing pressure. Both ionic and covalent bondings are observed in Sn4Au. Optical parameters of Sn4Au are investigated at different pressures. The characteristic peaks in reflectivity, refractive index and photoconductivity exhibit a shift towards higher energy with increasing pressure for all polarizations of the electric field vector. The absorption coefficient and reflectivity spectra designate Sn4Au as a suitable system for optoelectronic applications. Moreover, the pressure dependent shifts in the electronic density of states at the Fermi level, the changes in the Debye temperature, and pressure induced variations in the repulsive Coulomb pseudopotential have been used to explore the effect of pressure on the superconducting transition temperature in this study.https://papers.cool/arxiv/2408.07458Displacement correlations in a two-dimensional colloidal liquid and their relationship with shear strain correlations2024-08-15T00:00:00+00:00Takeshi OoshidaTakeshi MatsumotoMichio OtsukiCorrelations of the displacement field in a two-dimensional model colloidal liquid is studied numerically and analytically. By calculating the displacement correlations and the shear strain correlations from the numerical data of particle simulations, the displacement field is shown to have nontrivial correlations, even in liquids that are only slightly glassy with the area fraction as low as 0.5. It is suggested analytically and demonstrated numerically that the displacement correlations are more informative than the shear correlations: the former behaves logarithmically with regard to the spatial distance at shorter scales, while the corresponding information is missing from the shear correlations. The logarithmic behavior of the displacement correlations is interpreted as manifesting a long-lived aspect of the cage effect.https://papers.cool/arxiv/2408.07462High Strain Rate Compressive Deformation Behavior of Nickel Microparticles2024-08-15T00:00:00+00:00Bárbara BellónLalith Kumar BhaskarTobias BrinkRaquel Aymerich-ArmengolDipali SonawaneDominique ChatainGerhard DehmRajaprakash RamachandramoorthyUnderstanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities. Moreover, the interplay effects of strain rates and temperatures are often overlooked and could have critical effects in applications. In this study, for the first time, the rate-dependent and temperature-dependent mechanical response of nickel microparticles have been investigated. The microparticles were obtained by solid-state dewetting of nickel thin films deposited on c-sapphire. They exhibit self-similar shapes with identical sets of planes, facilitating straightforward comparison between particles. This research represents the first in-depth analysis of the mechanical properties of nickel single crystal dewetted microparticles across six orders of magnitude at room temperature and three orders of magnitude at 128 K. Molecular dynamic simulations (MD) were conducted in parallel on particles with the same faceting. In this work, the gap between experiments and simulations has been reduced to over one order of magnitude in size and 3 orders of magnitude in the strain rates. The thermal activation parameter analysis and MD simulations were employed to ascertain whether homogeneous or heterogeneous dislocation nucleation was the dominant mechanism controlling deformation in the particles.https://papers.cool/arxiv/2408.07469Predictions of the interfacial free energy along the coexistence line from single-state calculations2024-08-15T00:00:00+00:00Ignacio Sanchez-BurgosPablo Montero de HijesEduardo SanzCarlos VegaJorge R. EspinosaThe calculation of the interfacial free energy between two thermodynamic phases is crucial across different fields including materials science, chemistry, and condensed matter physics. This study delves into a thermodynamic approach to predict interfacial free energy along a coexistence line. For that purpose, we utilize Gibbs-Cahn integration method to accurately determine the interfacial free energy along various coexistence conditions, relying solely on data obtained from a single-state interfacial free energy calculation at given conditions of pressure and temperature. Unlike traditional methods that require individual measurements at each thermodynamic state, this approach significantly reduces computational demand and enhances efficiency. The integration scheme requires the computation of the excess interfacial energy (by means of unbiased NVT computer simulations in which the two phases involved coexist) at different points along the coexistence line, for later use this information as an input in our calculations. We apply this method for the Lennard-Jones and mW water model for the case of the liquid-solid interface, as well as Lennard-Jones and TIP4P/2005 models for liquid-vapor interfaces. Our results highlight the accuracy and effectiveness of this thermodynamic integration route for estimating the interfacial free energy along a coexistence line.https://papers.cool/arxiv/2408.07477Ternary superhydrides under pressure of Anderson's theorem: Near-record superconductivity in (La,Sc)H$_{12}$2024-08-15T00:00:00+00:00Dmitrii V. SemenokIvan A. TroyanDi ZhouAndrei V. SadakovKirill S. PervakovOleg A. SobolevskiyAnna G. IvanovaMichele GalassoFrederico Gil AlabarseWuhao ChenChuanying XiToni HelmSven LutherVladimir M. PudalovViktor V. StruzhkinLanthanum-hydrogen system and its derivatives remain among the most promising for achieving room-temperature superconductivity. In this study, we examined the formation of ternary lanthanum-scandium superhydrides at pressures up to 220 GPa. The primary product of the LaSc alloy's reaction with hydrogen is newly discovered cubic (La,Sc)H$_{12}$, demonstrating clear superconducting transition in all six channels of the van der Pauw scheme below 244-248 K. In this compound with an unusually large unit cell volume, virtually no magnetoresistance was observed in fields up to 68 Tesla. Synthesized samples of (La,Sc)H$_{12}$ demonstrate pronounced superconducting diode and SQUID-like effects at a record high temperature of 226 K. Furthermore, our analysis revealed the formation of lower hexagonal polyhydrides (La,Sc)H$_{6-7}$, which could potentially account for the anomaly in electrical resistance observed near 274 K. This anomalous behavior may be of a superconducting nature, since low-temperature diffraction studies indicate the absence of corresponding structural phase transitions in La-Sc polyhydrides.https://papers.cool/arxiv/2408.07491Soliton radiation and role of the energy dissipation in soliton dynamics in an oscillating magnetic field2024-08-15T00:00:00+00:00Larissa BrizhikDynamics of the Davydov's soliton in an external oscillating in time magnetic field is studied analytically. It is shown that in a field perpendicular to the molecular chain axis, soliton wavefunction is a product of the electron plane wave in the plane perpendicular to the molecular chain, and longitudinal component of the wavefunction which satisfies the modified nonlinear Schroedinger equation with an extra term determined by the field. It is shown that soliton width and amplitude are constant, while its velocity and phase are oscillating functions of time with the frequency of the main harmonic equal to the magnetic field frequency. It is shown that soliton dynamics has two different regimes at low and high frequencies of the magnetic field as comparing with the characteristic soliton frequency. Due to time-depending velocity and nonzero acceleration, soliton radiates linear waves in both directions from its center of mass. In the presence of energy dissipation, soliton velocity is bound from above due to the balance of the energy gain from the magnetic field, and its loss because of the dissipation and radiation of linear sound waves. This balance occurs at the resonant frequency of the magnetic field. It is concluded that such significant impact of time-depending magnetic field on charge transport, provided by solitons, can affect functioning of the devices based on low-dimensional moolecular systems. These results suggest the physical mechanism of therapeutic effects of oscillating magnetic fields.https://papers.cool/arxiv/2408.07502Work and Activation in a Nematic Polymer Network Ribbon2024-08-15T00:00:00+00:00H. SinghK. SuryanarayananE. G. VirgaWe study spontaneous deformations of a ribbon made of nematic polymer networks and activated under the action of a mechanical load. We show that when such ribbons are activated appropriately, the deformations produced can pull back and perform work against the externally applied load. We perform two numerical experiments to demonstrate this effect: (1) the \emph{pulling} experiment, where the ribbon is pulled longitudinally by a point force, and (2) the \emph{bending} experiment, where the ribbon is bent out of plane by a terminally applied point force. We quantify the capacity of the ribbon to work against external loads, and compute its dependence on both the ribbon thickness and the imprinted nematic texture (that is, the distribution of the nematic directors across the ribbon's length). Finally, we compute the efficiency of the activation process. Building on the outcomes of our numerical explorations, we formulate two educated conjectures on how the activation efficiency can in general be improved by acting on both the applied load and the imprinted nematic texture.https://papers.cool/arxiv/2408.07518Defect recombination origin of low energy excess in semiconductor detectors2024-08-15T00:00:00+00:00Kai NordlundFanhao KongFlyura DjurabekovaMatti HeikinheimoKimmo TuominenNader MirabolfathiWhen the detection threshold in semiconductor detectors is pushed to increasingly low energies, an ``excess" signal of apparent energy release events below a few hundred eV is observed in several different kinds of detectors, hindering their sensitivity for rare event signals in this energy range. Using atomistic simulations with classical thermostat and quantum thermal bath, we show that this kind of signal is consistent with energy release from long-term recombination events of complex defects that can be formed by any kind of nuclear recoil radiation events. The recombination events are shown to have a very similar exponential dependence of energy as that observed in experiments. By detailed analysis of recombination events, we show that crossing a low energy barrier ($\lesssim$ 0.1 eV) can trigger larger energy releases in an avalanche-like effect. This explains why large energy release events can occur even down to cryogenic temperatures.https://papers.cool/arxiv/2408.07520Truncation error in series expansions linking microcanonical and canonical ensembles2024-08-15T00:00:00+00:00Atsushi IwakiIn the microcanonical thermal pure quantum (mTPQ) method, the canonical ensemble is derived using Taylor series expansions. We prove that the truncation error decreases exponentially with system size when the effective temperature of the mTPQ state is smaller than the target temperature, and otherwise, the error remains constant. We also show the discipline to set the mTPQ parameter by considering the trade-off between the error and the numerical cost.https://papers.cool/arxiv/2408.07551Graph polyhedral divisions in growing cell aggregates2024-08-15T00:00:00+00:00Urban ŽeleznikMatej KrajncTanmoy SarkarIn the recently proposed Graph Vertex Model (GVM), cellular rearrangements are implemented as local graph transformations of the cell aggregate, represented by a knowledge graph [1]. This study extends GVM to incorporate cell division, a critical biological process involved in morphogenesis, homeostasis, and disease progression. Like cellular rearrangements, cell division in GVM begins by identifying a subgraph of nodes and links, involved in the division, by matching suitable graph patterns or templates within the full knowledge graph. The matched subgraph is then transformed to incorporate topological changes within the knowledge graph, caused by the division event. Importantly, when this transformation is applied to a polygon in a 2D tiling, it performs the transformation, required to divide a polygon, indicating that the 3D graph transformation is general and applicable also to 2D vertex models. Our extension of GVM enables the study of the dynamics of growing cell aggregates in 3D to offer new insights into developmental processes and cancer growth.https://papers.cool/arxiv/2408.07554Cyclic and helical symmetry-informed machine learned force fields: Application to lattice vibrations in carbon nanotubes2024-08-15T00:00:00+00:00Abhiraj SharmaShashikant KumarPhanish SuryanarayanaWe present a formalism for developing cyclic and helical symmetry-informed machine learned force fields (MLFFs). In particular, employing the smooth overlap of atomic positions descriptors with the polynomial kernel method, we derive cyclic and helical symmetry-adapted expressions for the energy, atomic forces, and phonons (describe lattice vibration frequencies and modes). We use this formulation to construct a symmetry-informed MLFF for carbon nanotubes (CNTs), where the model is trained through Bayesian linear regression, with the data generated from ab initio density functional theory (DFT) calculations performed during on-the-fly symmetry-informed MLFF molecular dynamics simulations of representative CNTs. We demonstrate the accuracy of the MLFF model by comparisons with DFT calculations for the energies and forces, and density functional perturbation theory calculations for the phonons, while considering CNTs not used in the training. In particular, we obtain a root mean square error of $1.4 \times 10^{-4}$ Ha/atom, $4.7 \times 10^{-4}$ Ha/Bohr, and 4.8 cm$^{-1}$ in the energy, forces, and phonon frequencies, respectively, which are well within the accuracy targeted in ab initio calculations. We apply this framework to study phonons in CNTs of various diameters and chiralities, where we identify the torsional rigid body mode that is unique to cylindrical structures and establish laws for variation of the phonon frequencies associated with the ring modes and radial breathing modes. Overall, the proposed formalism provides an avenue for studying nanostructures with cyclic and helical symmetry at ab initio accuracy, while providing orders-of-magnitude speedup relative to such methods.https://papers.cool/arxiv/2408.07557Band-selective simulation of photoelectron intensity and converging Berry phase in trilayer graphene2024-08-15T00:00:00+00:00Hayoon ImSue Hyeon HwangMinhee KangKyoo KimHaeyong KangChoongyu HwangBerry phase is one of the key elements to understand quantum-mechanical phenomena such as the Aharonov-Bohm effect and the unconventional Hall effect in graphene. The Berry phase in monolayer and bilayer graphene has been manifested by the anisotropic distribution of photoelectron intensity along a closed loop in the momentum space as well as its rotation by a characteristic angle upon rotating light polarization. Here we report the band-selective simulation of photoelectron intensity of trilayer graphene to understand its Berry phase within the tight-binding formalism. ABC- and ABA-stacked trilayer graphene show characteristic rotational angles of photoelectron intensity distribution, as predicted from their well-known Berry phases. Surprisingly, however, in ABA-stacked trilayer graphene, the rotational angle changes upon approaching toward the band touching point between the conduction and valence bands, which suggest that Berry phase changes as a function of binding energy. The binding energy-dependent Berry phase is attributed to the enhanced hybridization of the two electron bands of ABA-stacked trilayer graphene that converge at the band touching point, resulting in the converging Berry phase. These findings will provide an efficient way of tuning Berry phase and hence exotic phenomena stemming from the Berry phase.https://papers.cool/arxiv/2408.07570Vortices in the Many-Body Excited States of Interacting Bosons in Two Dimension2024-08-15T00:00:00+00:00Mateusz ŚlusarczykKrzysztof PawłowskiQuantum vortices play an important role in the physics of two-dimensional quantum many-body systems, though they usually are understood in the single-particle framework like the mean-field approach. Inspired by the study on the relations between solitons and yrast states, we investigate here the emergence of vortices from the eigenstates of a N -body Hamiltonian of interacting particles trapped in a disk. We analyse states that appear by consecutively measuring the positions of particles. These states have densities, phases, and energies closely resembling mean-field vortices. We discuss similarities, but also point out purely many-body features, such as vortex smearing due to the quantum fluctuation of their center. The ab initio analysis of the many-body system, and mean-field approaches are supported by the analysis within the Bogoliubov approach.https://papers.cool/arxiv/2408.07573Critical dimension for hydrodynamic turbulence2024-08-15T00:00:00+00:00Mahendra K. VermaHydrodynamic turbulence exhibits nonequilibrium behaviour with $k^{-5/3}$ energy spectrum, and equilibrium behaviour with $k^{d-1}$ energy spectrum and zero viscosity, where $d$ is the space dimension. Using recursive renormalization group {in Craya-Herring basis}, we show that the nonequilibrium solution is valid only for $d < 6$, whereas equilibrium solution with zero viscosity is the only solution for $d>6$. Thus, $d=6$ is the critical dimension for hydrodynamic turbulence. In addition, we show that the energy flux changes sign from positive to negative near $d=2.15$. We also compute the energy flux and Kolmogorov's constants for various $d$'s, and observe that our results are in good agreement with past numerical results.https://papers.cool/arxiv/2408.07585Localization and mobility edges in non-Hermitian continuous quasiperiodic systems2024-08-15T00:00:00+00:00Xiang-Ping JiangZhende LiuYayun HuLei PanThe mobility edge (ME) is a fundamental concept in the Anderson localized systems, which marks the energy separating extended and localized states. Although the ME and localization phenomena have been extensively studied in non-Hermitian (NH) quasiperiodic tight-binding models, they remain limited to NH continuum systems. Here, we investigate the ME and localization properties of a one-dimensional (1D) NH quasiperiodic continuous system, which is described by a Schr{\"o}dinger equation with an imaginary vector potential and an incommensurable one-site potential. We find that the ME is located in the real spectrum and falls between the localized and extended states. Additionally, we show that under the periodic boundary condition, the energy spectrum always exhibits an open curve representing high-energy extended electronic states characterized by a non-zero integer winding number. This complex spectrum topology is closely connected with the non-Hermitian skin effect (NHSE) observed under open boundary conditions, where the eigenstates of the bulk bands accumulate at the boundaries. Furthermore, we analyze the critical behavior of the localization transition and obtain critical potential amplitude accompanied by the universal critical exponent $\nu \simeq 1/3$. Our study provides valuable inspiration for exploring MEs and localization behaviors in NH quasiperiodic continuous systems.https://papers.cool/arxiv/2408.07608MatterGPT: A Generative Transformer for Multi-Property Inverse Design of Solid-State Materials2024-08-15T00:00:00+00:00Yan ChenXueru WangXiaobin DengYilun LiuXi ChenYunwei ZhangLei WangHang XiaoInverse design of solid-state materials with desired properties represents a formidable challenge in materials science. Although recent generative models have demonstrated potential, their adoption has been hindered by limitations such as inefficiency, architectural constraints and restricted open-source availability. The representation of crystal structures using the SLICES (Simplified Line-Input Crystal-Encoding System) notation as a string of characters enables the use of state-of-the-art natural language processing models, such as Transformers, for crystal design. Drawing inspiration from the success of GPT models in generating coherent text, we trained a generative Transformer on the next-token prediction task to generate solid-state materials with targeted properties. We demonstrate MatterGPT's capability to generate de novo crystal structures with targeted single properties, including both lattice-insensitive (formation energy) and lattice-sensitive (band gap) properties. Furthermore, we extend MatterGPT to simultaneously target multiple properties, addressing the complex challenge of multi-objective inverse design of crystals. Our approach showcases high validity, uniqueness, and novelty in generated structures, as well as the ability to generate materials with properties beyond the training data distribution. This work represents a significant step forward in computational materials discovery, offering a powerful and open tool for designing materials with tailored properties for various applications in energy, electronics, and beyond.https://papers.cool/arxiv/2408.07612Long-Term Aging Study of a Silicon Nitride Nanomechanical Resonator2024-08-15T00:00:00+00:00Michel StephanAlexandre BouchardTimothy HodgesRichard G. GreenTriantafillos KoukoulasLixue WuRaphael St-GelaisShort-term changes in the resonance frequency of silicon nitride (SiN) nanomechanical resonators can be measured very precisely due to low thermomechanical fluctuations resulting from large mechanical quality factors. These properties enable high-performance detection of quasi-instantaneous stimuli, such as sudden exposure to radiation or adsorption of mass. However, practical use of such sensors will eventually raise questions regarding their less-studied longer-term stability, notably for calibration purposes. We characterize aging of an as-fabricated SiN membrane by continuously tracking changes of its resonance frequency over 135 days in a temperature-controlled high vacuum environment. The aging behavior is consistent with previously reported double-logarithmic and drift-reversal aging trends observed in quartz oscillators. The aging magnitude (300 ppm) is also comparable to typical temperature compensated quartz oscillators (TCXO), after normalization to account for the greater importance of interfaces in our thin (90 nm) resonator, compared to several microns thick TCXOs. Possible causes of aging due to surface adsorption are investigated. We review models on how water adsorption and desorption can cause significant frequency changes, predominantly due to chemisorption stress. Chemical species adsorbed on the resonator surface are also identified by X-ray photoelectron spectroscopy (XPS). These measurements show a significant increase in carbon every time the sample is placed under vacuum, while subsequent exposure to air causes an increase in oxidated carbon. Developing models for the contribution of carbon and oxygen to the membrane stress should therefore be an important future direction. Other contaminants, notably alkaline and halide ions, are detected in smaller quantities and briefly discussed.https://papers.cool/arxiv/2408.07635Unveiling Stripe-shaped Charge Modulations in Doped Mott Insulators2024-08-15T00:00:00+00:00Ning XiaYuchen GuoShuo YangInspired by recent experimental findings, we investigate various scenarios of the doped Hubbard model with impurity potentials. We calculate the lattice Green's function in a finite-size cluster and then map it to the continuum real space, which allows for a direct comparison with scanning-tunneling-microscopy measurements on the local density of states. Our simulations successfully reproduce experimental data, including the characteristic stripe- and ladder-shaped structures observed in cuprate systems. Moreover, our results establish a connection between previous numerical findings on stripe-ordered ground states and experimental observations, thereby providing new insights into doped Mott insulators.https://papers.cool/arxiv/2408.07643Influence of disordered and anisotropic interactions on relaxation dynamics and propagation of correlations in tweezer arrays of Rydberg dipoles2024-08-15T00:00:00+00:00Kaustav MukherjeeGrant W. BiedermannRobert J. Lewis-SwanWe theoretically investigate the out-of-equilibrium dynamics of irregular one- and two-dimensional arrays of Rydberg dipoles featuring spatially anisotropic interactions. Starting from a collectively polarized initial state, we map out the dynamical phase diagram and identify a crossover between regimes of regular and anomalously slow relaxation of the initial collective order, that strongly depends on both the degree of interaction disorder and anisotropy. In addition, we find the regime of slow relaxation is characterized by a sub-ballistic propagation of correlations that remained confined to short distances even at long times. To explain our findings we develop an analytic model based on decoupled clusters of interacting dipoles that goes beyond prior theoretical works and enables us to identify multiple relaxation timescales. Our findings can be relevant for a wide variety of quantum science platforms naturally featuring disordered dipolar interactions, including polar molecules, frozen Rydberg gases and NV centers.https://papers.cool/arxiv/2408.07657Imaging strain-controlled magnetic reversal in thin CrSBr2024-08-15T00:00:00+00:00Kousik BaganiAndriani VervelakiDaniel JetterAravind DevarakondaMärta A. TschudinBoris GrossDaniel G. ChicaDavid A. BroadwayCory R. DeanXavier RoyPatrick MaletinskyMartino PoggioTwo-dimensional materials are extraordinarily sensitive to external stimuli, making them ideal for studying fundamental properties and for engineering devices with new functionalities. One such stimulus, strain, affects the magnetic properties of the layered magnetic semiconductor CrSBr to such a degree that it can induce a reversible antiferromagnetic-to-ferromagnetic phase transition. Given the pervasiveness of non-uniform strain in exfoliated two-dimensional magnets, it is crucial to understand its impact on their magnetic behavior. Using scanning SQUID-on-lever microscopy, we directly image the effects of spatially inhomogeneous strain on the magnetization of layered CrSBr as it is polarized by a field applied along its easy axis. The evolution of this magnetization and the formation of domains is reproduced by a micromagnetic model, which incorporates the spatially varying strain and the corresponding changes in the local interlayer exchange stiffness. The observed sensitivity to small strain gradients along with similar images of a nominally unstrained CrSBr sample suggest that unintentional strain inhomogeneity influences the magnetic behavior of exfoliated samples and must be considered in the design of future devices.https://papers.cool/arxiv/2408.07659Enabling two-dimensional electron gas with high room-temperature electron mobility exceeding 100 cm$^2$/Vs at a perovskite oxide interface2024-08-15T00:00:00+00:00Georg HoffmannMartina ZupancicAysha A. RiazCurran KalhaChristoph SchlueterAndrei GloskovskiiAnna RegoutzMartin AlbrechtJohanna NordlanderOliver BierwagenIn perovskite oxide heterostructures, bulk functional properties coexist with emergent physical phenomena at epitaxial interfaces. Notably, charge transfer at the interface between two insulating oxide layers can lead to the formation of a two-dimensional electron gas (2DEG) with possible applications in, e.g., high-electronmobility transistors and ferroelectric field-effect transistors. So far, the realization of oxide 2DEGs is, however, largely limited to the interface between the single-crystal substrate and epitaxial film, preventing their deliberate placement inside a larger device architecture. Additionally, the substrate-limited quality of perovskite oxide interfaces hampers room-temperature 2DEG performance due to notoriously low electron mobility. In this work, we demonstrate the controlled creation of an interfacial 2DEG at the epitaxial interface between perovskite oxides BaSnO$_3$ and LaInO$_3$ with enhanced room-temperature electron mobilities up to 119 cm$^2$/Vs - the highest room-temperature value reported so far for a perovskite oxide 2DEG. Using a combination of state-of-the-art deposition modes during oxide molecular beam epitaxy, our approach opens up another degree of freedom in optimization and $in$-$situ$ control of the interface between two epitaxial oxide layers away from the substrate interface. We thus expect our approach to apply to the general class of perovskite oxide 2DEG systems and to enable their improved compatibility with novel device concepts and integration across materials platforms.https://papers.cool/arxiv/2408.07681Visualizing High Entropy Alloy Spaces: Methods and Best Practices2024-08-15T00:00:00+00:00Brent VelaTrevor HastingsRaymundo ArróyaveMulti-Principal Element Alloys (MPEAs) have emerged as an exciting area of research in materials science in the 2020s, owing to the vast potential for discovering alloys with unique and tailored properties enabled by the combinations of elements. However, the chemical complexity of MPEAs poses a significant challenge in visualizing composition-property relationships in high-dimensional design spaces. Without effective visualization techniques, designing chemically complex alloys is practically impossible. In this methods/protocols article, we present a `toolbox' of visualization techniques that allow for meaningful and insightful visualizations of MPEA composition spaces and property spaces. Our contribution to this toolbox are UMAP projections of entire alloy spaces. We deploy this visualization tool-kit on the following MPEA case studies: 1) Visualizing literature reviews, 2) constraint-satisfaction alloy design scheme, 3) Bayesian optimization alloy design campaigns. Furthermore, we show how this method can be applied to any barycentric design space. While there is no one-size-fits-all visualization technique, our toolbox offers a range of methods and best practices that can be tailored to specific MPEA research needs. This article is intended for materials scientists interested in performing research on multi-principal element alloys, chemically complex alloys, or high entropy alloys, and is expected to facilitate the discovery of novel and tailored properties in MPEAs.https://papers.cool/arxiv/2408.07682A method for reconstructing the self-energy from the spectral function2024-08-15T00:00:00+00:00B Sriram ShastryA fundamental question about the nature of quantum materials such as High-T$_c$ systems remain open to date -- it is unclear whether they are (some variety of) Fermi liquids, or (some variety of) non Fermi liquids. A direct avenue to determine their nature is to study the (imaginary part of the) self-energy at low energies. Here we present a method to extract this low $\omega$ self-energy from experimentally derived spectral functions. The method seems suited for implementation with high quality angle resolved photoemission data. It is based on a helpful Theorem proposed here, which assures us that the method has minimal (or vanishing) error at the lowest energies. We provide numerical examples showing that a few popular model systems yield distinguishably different low energy self-energies.https://papers.cool/arxiv/2408.07690Magnetic Correlations and Pairing Tendencies of the Hybrid Stacking Nickelate Superlattice La$_7$Ni$_5$O$_{17}$ (La$_3$Ni$_2$O$_7$/La$_4$Ni$_3$O$_{10}$) under Pressure2024-08-15T00:00:00+00:00Yang ZhangLing-Fang LinAdriana MoreoThomas A. MaierElbio DagottoMotivated by the recent rapid progress in high-$T_c$ nickelate superconductors, we comprehensively study the physical properties of the alternating bilayer trilayer stacking nickelate La$_7$Ni$_5$O$_{17}$. The high-symmetry phase of this material, without the tilting of oxygen octahedra, is not stable at ambient conditions but becomes stable under high pressure, where a small hole pocket $\gamma_0$, composed of the $d_{3z^2-r^2}$ states in the trilayer sublattice, appears. This pocket was identified in our previous work for trilayer La$_4$Ni$_3$O$_{10}$ as important to develop superconductivity. Moreover, using random-phase approximation calculations, we find a leading $s^\pm$ pairing state for the high-symmetry phase under pressure with similar pairing strength as that obtained previously for the bilayer La$_3$Ni$_2$O$_7$ compound, suggesting a similar or higher superconducting transition temperature $T_c$. In addition, we find that the dominant magnetic fluctuations in the system driving this pairing state have antiferromagnetic structure both in-plane and between the planes of the top and bottom trilayer and bilayer sublattices, while the middle trilayer is magnetically decoupled.