https://papers.cool/arxiv/physics.flu-dynFluid Dynamics2024-08-09T00:00:00+00:00python-feedgenCool Papers - Immersive Paper Discoveryhttps://papers.cool/arxiv/2408.04319Vorticity blowup in compressible Euler equations in $\mathbb{R}^d, d \geq 3$2024-08-09T00:00:00+00:00Jiajie ChenWe prove finite-time vorticity blowup in the compressible Euler equations in $\mathbb{R}^d$ for any $d \geq 3$, starting from smooth, localized, and non-vacuous initial data. This is achieved by lifting the vorticity blowup result from [CCSV24] in $\mathbb{R}^2$ to $\mathbb{R}^d$ and utilizing the axisymmetry in $\mathbb{R}^d$. At the time of the first singularity, both vorticity blowup and implosion occur on a sphere $S^{d-2}$. Additionally, the solution exhibits a non-radial implosion, accompanied by a stable swirl velocity that is sufficiently strong to initially dominate the non-radial components and to generate the vorticity blowup.https://papers.cool/arxiv/2408.04047Proper orthogonal decomposition analysis of square lid driven cavity flows containing particle suspensions2024-08-09T00:00:00+00:00John SheltonNitin KatikiMorakinyo AdesemowoContinual perturbations to the flow field in the square lid driven cavity can significantly impact both its stability and the dynamic characteristics of the system. In this study, the effect of these perturbations are analyzed via computational fluid dynamics simulations of a square, two-dimensional, lid driven cavity containing varying area fractions of suspended particles. The evolution over time of these particle-particle and particle-fluid interactions generate two-dimensional disturbance velocity changes in the flow field. In order to better understand the characteristics and effects of these changes, proper orthogonal decomposition analysis is performed on the velocity difference flow field to determine the dominant flow structures over the simulation time domain. The resulting eigenvectors and eigenvalues represent the varying dominant flow structures and their respective dominance over the simulation time, respectively. This is carried out at particle suspension area fractions from 10\% - 50\% and for Reynolds numbers of 100, 400, 700, and 1000. Critical flow regimes and particle suspension area fractions are discussed in order to characterize the stability of this particle-in-fluid system.https://papers.cool/arxiv/2408.04153Asymmetry of imploding detonations in thin channels2024-08-09T00:00:00+00:00Sebastian Rodriguez RoseroJason LoiseauAndrew J. HigginsThe factors that influence the symmetry of an imploding detonation are investigated experimentally and theoretically. Detonations in sub-atmospheric acetylene-oxygen were initiated and made to converge in an apparatus that followed that of Lee and Lee (Phys Fluids 8:2148-2152, 1965). The width of the test section was controlled with a wave-shaping insert, which formed the test section against the viewing window, creating an effectively two-dimensional problem with a channel width comparable to the detonation cell size. The convergence of the detonation was observed via self-luminous open-shutter photography and high-speed videography. The resulting videos were analyzed to quantify the wave speed, degree of asymmetry, and direction and magnitude of the offset in the center of convergence. To determine the experimental parameters that influence the symmetry of the imploding wave, the wave-shaping insert was intentionally canted by 0.3{\deg}-0.6{\deg}, accentuating the asymmetry of the imploding detonation. The experiment was modeled using a Huygens construction wherein the detonation is treated as a collection of wavelets, each assumed to propagate locally at a velocity determined by the channel width. The results of the model reproduced the observed offsets in detonation convergence from the center of the apparatus, confirming that velocity deficits resulting from the narrow channel width control the observed asymmetry.https://papers.cool/arxiv/2408.04240Contact angle hysteresis and static friction for 2-dimensional droplets2024-08-09T00:00:00+00:00Jong-In YangJooyoo HongContact angle hysteresis of droplets will be examined in light of static friction between liquid drop and solid surface. Unlike frictions in solid-solid interfaces, pinning forces at contact points (2D) or contact lines (3D) would be the cause of friction. We will define coefficients of static friction and relate them with advancing and receding contact angles for the case of 2-dimensional droplets. In our work sessile drops in an inclined plane, and pendent drops in a slanted ceiling will all be analyzed within a single framework with the inclination angle as a free parameter. We can then visualize the gradual change of shapes of a droplet put on a plane as the inclination angle changes adiabatically to make a complete turn. We also point out that there could be two distinct stable configurations of pendent droplets for the same physical conditions, i.e. the bifurcation.https://papers.cool/arxiv/2408.04250The oscillating and vibrating cylinder: a benchmark to study low Mach number aeroacoustics2024-08-09T00:00:00+00:00Étienne SpieserSiyang ZhongXin ZhangHydrodynamic and acoustic scales separate as the Mach number decreases, making the modelling of aeroacoustic phenomena singular in this flow regime. The benchmark of the flow developing around an oscillating and vibrating cylinder is one of the scarce configuration that is fully analytically tractable, and is thus precious in the validation of new theories or solvers. This work carefully derives the complete incompressible flow solution for this case, extending the axisymmetric results of the literature to more complex cylinder motion. High-order finite element method solution of the incompressible Navier-Stokes equations provide a reference to validate the analytical formulae derived here. Both analytical and numerical investigations agree on an independence of the configuration to the Reynolds number. Up to the critical Reynolds number, found to lie above $10^4$, the hydrodynamic solution of this configuration is solely governed by the Stokes number. The exact expression of the sound radiated in the far field is computed by accounting for the cylinder scattering by means of tailored Green's functions.https://papers.cool/arxiv/2408.04269Energy Method and Stability of Shear Flows: an Elementary Tutorial2024-08-09T00:00:00+00:00Antonio BarlettaGiuseppe MuloneThis paper provides a pedagogical introduction to the classical nonlinear stability analysis of the plane Poiseuille and Couette flows. The whole procedure is kept as simple as possible by presenting all the logical steps involved in the application of the energy method and leading to the Euler-Lagrange equations. Then, the eigenvalue problems needed for the evaluation of the nonlinear energy threshold of the Reynolds number for stability are formulated for transverse modes and for longitudinal modes. Such formulations involve the streamfunction and, in the case of longitudinal modes, also the streamwise component of velocity. An accurate numerical solution of the eigenvalue problems, based on Galerkin's method of weighted residuals with the test functions expressed in terms of Chebyshev polynomials, is discussed in details. The numerical codes developed for the software Mathematica 14 (\copyright{} Wolfram Research, Inc.) are also presented. A critical analysis of the obtained results is finally proposed.