https://papers.cool/arxiv/physicsPhysics2024-08-09T00:00:00+00:00python-feedgenCool Papers - Immersive Paper Discoveryhttps://papers.cool/arxiv/2408.03970Thermal quasi-particle theory2024-08-09T00:00:00+00:00So HirataThe widely used thermal Hartree-Fock (HF) theory is generalized to include the effect of electron correlation while maintaining its quasi-independent-particle framework. An electron-correlated internal energy (or grand potential) is defined by the second-order finite-temperature many-body perturbation theory (MBPT), which then dictates the corresponding thermal orbital (quasi-particle) energies in such a way that all thermodynamic relations are obeyed. The associated density matrix is of the one-electron type, whose diagonal elements take the form of the Fermi-Dirac distribution functions, when the grand potential is minimized. The formulas for the entropy and chemical potential are unchanged from those of Fermi-Dirac or thermal HF theory. The theory thus postulates a finite-temperature extension of the second-order Dyson self-energy of one-particle many-body Green's function theory and can be viewed as a second-order, diagonal, frequency-independent, thermal inverse Dyson equation. At low temperature, the theory approaches finite-temperature MBPT of the same order, but it outperforms the latter at intermediate temperature by including additional electron-correlation effects through orbital energies. A physical meaning of these thermal orbital energies (including that of thermal HF orbital energies, which has been elusive) is proposed.https://papers.cool/arxiv/2408.03971A systematic Investigation of Thermoelectric Properties of Monolayers of ZrX2N4(X = Si, Ge)2024-08-09T00:00:00+00:00Chayan DasDibyajyoti SaikiaSatyajit SahuIn the past decade, it has been demonstrated that monolayers of metal dichalcogenides are well-suited for thermoelectric applications. ZrX2N4 (X = Si, Ge) is a reasonable choice for thermoelectric applications when considering a favorable value of the figure of merit in two-dimensional (2D) layered materials. In this study, we examined the thermoelectric characteristics of the two-dimensional monolayer of ZrX2N4 (where X can be either Si or Ge) using a combination of Density Functional Theory (DFT) and the Boltzmann Transport Equation (BTE). A thermoelectric figure of merit (ZT) of 0.90 was achieved at a temperature of 900 K for p-type ZrGe2N4, while a ZT of 0.83 was reported for n-type ZrGe2N4 at the same temperature. In addition, the ZrGe2N4 material exhibited a thermoelectric figure of merit (ZT) of around 0.7 at room temperature for the p-type. Conversely, the ZrSi2N4 exhibited a relatively lower thermoelectric figure of merit (ZT) at ambient temperature. At higher temperatures, the ZT value experiences a substantial increase, reaching 0.89 and 0.82 for p-type and n-type materials, respectively, at 900 K. Through our analysis of the electronic band structure, we have determined that ZrSi2N4 and ZrGe2N4 exhibit indirect bandgaps (BG) of 2.74 eV and 2.66 eV, respectively, as per the Heyd-Scuseria-Ernzerhof (HSE) approximation.https://papers.cool/arxiv/2408.04014New versus past silica crush curve experiments: application to Dimorphos benchmarking impact simulations2024-08-09T00:00:00+00:00Uri MalamudChristoph M. SchaferIrina Luciana San SebastianMaximilian TimpeKarl Alexander EssinkChristopher KreuzigGerwin MeierJürgen BlumHagai B. PeretsChristoph BurgerCrush curves are of fundamental importance to numerical modeling of small and porous astrophysical bodies. The empirical literature often measures them for silica grains, and different studies have used various methods, sizes, textures, and pressure conditions. Here we review past studies and supplement further experiments in order to develop a full and overarching understanding of the silica crush curve behavior. We suggest a new power-law function that can be used in impact simulations of analog materials similar to micro-granular silica. We perform a benchmarking study to compare this new crush curve to the parametric quadratic crush curve often used in other studies, based on the study case of the DART impact onto the asteroid Dimorphos. We find that the typical quadratic crush curve parameters do not closely follow the silica crushing experiments, and as a consequence they under (over) estimate compression close (far) from the impact site. The new crush curve presented here, applicable to pressures between a few hundred Pa and up to 1.1 GPa, might therefore be more precise. Additionally, it is not calibrated by case-specific parameters, and can be used universally for comet- or asteroid-like bodies, given an assumed composition similar to micro-granular silica.https://papers.cool/arxiv/2408.04017Shift photocurrent vortices from topological polarization textures2024-08-09T00:00:00+00:00Aneesh AgarwalWojciech J. JankowskiDaniel BennettRobert-Jan SlagerFollowing the recent interest in van der Waals (vdW) ferroelectrics, topologically nontrivial polar structures have been predicted to form in twisted bilayers. Due to the unconventional nature of vdW ferroelectricity, these topological polar structures have proven difficult to observe experimentally. Here we propose that these textures may be probed optically by showing that topological polarization textures result in exotic nonlinear optical responses. We derive this relationship analytically using non-Abelian Berry connections and a quantum-geometric framework, supported by tight-binding and first-principles calculations. For the case of moir\'e materials without centrosymmetry, which form networks of polar merons and antimerons, the shift photoconductivity forms a vortex-like structure in real space. For a range of frequencies where transitions occur at the Brillouin zone edge, the shift photocurrents are anti-parallel to the in-plane electronic polarization field. Our findings highlight the interplay between complex polarization textures and nonlinear optical responses in vdW materials and provide a sought-after strategy for the experimental detection of topological polarization structures.https://papers.cool/arxiv/2408.04018Case studies on pre-eruptive X-class flares using R-value in the lower solar atmosphere2024-08-09T00:00:00+00:00Shreeyesh BiswalMarianna B. KorsósManolis K. GeorgoulisAlexander NindosSpiros PatsourakosRobertus ErdélyiThe R-value is a measure of the strength of photospheric magnetic Polarity Inversion Lines (PILs) in Active Regions (ARs). This work investigates the possibility of a relation between R-value variations and the occurrence of X-class flares in ARs, not in the solar photosphere, as usual, but above it in regions, closer to where flares occur. The modus operandi is to extrapolate the Solar Dynamic Observatory's (SDO) Helioseismic and Magnetic Imager (HMI) magnetogram data up to a height of 3.24 Mm above the photosphere and then compute the R-value based on the extrapolated magnetic field. Recent studies have shown that certain flare-predictive parameters such as the horizontal gradient of the vertical magnetic field and magnetic helicity may improve flare prediction lead times significantly if studied at a specific height range above the photosphere, called the Optimal Height Range (OHR). Here we define the OHR as a collection of heights where a sudden but sustained increase in R-value is found. For the eight case studies discussed in this paper, our results indicate that it is possible for OHRs to exist in the low solar atmosphere (between 0.36 - 3.24 Mm), where R-value spikes occur 48-68 hrs before the first X-class flare of an emerging AR. The temporal evolution of R-value before the first X-class flare for an emerging AR is also found to be distinct from that of non-flaring ARs. For X-class flares associated with non-emerging ARs, an OHR could not be found.https://papers.cool/arxiv/2408.04024Classification of synchronization in nonlinear systems using ICO learning2024-08-09T00:00:00+00:00J. P. DekaIn this work, we investigate the implications of the differential Hebbian learning rule known as Input-Correlations (ICO) learning in the classification of synchronization in coupled nonlinear oscillator systems. We are investigating the parity-time symmetric coupled Duffing oscillator system with nonlinear dissipation/amplification. In our investigation of the temporal dynamics of this system, it is observed that the system exhibits chaotic as well as quasiperiodic dynamics. On further investigation, it is found that the chaotic dynamics is distorted anti-phase synchronized, whereas the quasiperiodic dynamics is desynchronized. So, on the application of the ICO learning in these two parametric regimes, we observe that the weight associated with the stimulus remains constant when the oscillators are anti-phase synchronized, in spite of there being distortion in the synchronization. But when the oscillators exhibit quasiperiodic dynamics, there is erratic evolution of the weight with time. So, from this, it could be ascertained that the ICO learning could be made use of in the classification of synchronization dynamics in nonlinear systems.https://papers.cool/arxiv/2408.04036Structural transitions of calcium carbonate by molecular dynamics simulation2024-08-09T00:00:00+00:00Elizaveta SidlerRaffaela CabrioluCalcium carbonate plays a crucial role in the global carbon cycle, and its phase diagram has always been of significant scientific interest. In this study, we used molecular dynamics (MD) to investigate several structural phase transitions of calcium carbonate. Using the Raiteri potential model, we explored the structural transitions occurring at a constant pressure of 1 bar with temperatures ranging from 300 K to 2500 K, and at a constant temperature of 1600 K with pressures ranging from 0 to 13 GPa. At increasing temperatures, the transitions calcite, CaCO$_3$-IV, and CaCO$_3$-V are observed and characterized. Within the calcite structure, CO$_3^{2-}$ ions are ordered between layers. As temperature increases, the calcite to CaCO$_3$-IV transition occurs, determining the partial disordering of CO$_3^{2-}$ ions. At a higher temperature, CaCO$_3$-IV transforms into CaCO$_3$-V. By applying free energy analysis, we have classified the last transition as a continuous order-disorder phase transition. At a temperature of 2000 K, it appears a `disordered CaCO$_3$' structure, characterized by low order within the calcium and carbonate sublattices and the free rotation of CO$_3^{2-}$ ions. At increasing pressures, two calcium carbonate transformations were observed. At $P=$ 2 GPa, the CaCO$_3$-IV phase undergoes a phase transition into CaCO$_3$-V, demonstrating that the model can describe the transition between these two phases as pressure and temperature-driven. Another phase transition was detected at $P=$ 4.25 GPa -- CaCO$_3$-V transits into the recently discovered CaCO$_3$-Vb phase. This transition is classified as a first-order phase transition by structural analysis and free energy-based arguments.https://papers.cool/arxiv/2408.04078A Comparison of Fireball Luminous Efficiency Models using Acoustic Records2024-08-09T00:00:00+00:00Luke McFaddenPeter BrownDenis VidaThe total energy of a fireball is commonly obtained from optical measurements with an assumed value for luminous efficiency. Acoustic energy measurements offer an independent means of energy estimation. Here we combine optical and acoustic methods to validate the luminous efficiency model of Borovi\v{c}ka et al. (2020). Our goal is to compare these models with acoustic measurements of meteoroid energy deposition. Employing theoretical blast scaling laws following the approach of McFadden et al. (2021), we determine explosive yields for both fireball fragmentation events and cylindrical shocks for four different bright fireballs. We model fireballs using the MetSim software (Vida et al., 2023) and find that the Borovi\v{c}ka et al. (2020) model produces agreement better than a factor of two for our three chondritic fireball case studies. The major exception is an iron meteorite-producing fireball where the luminous efficiency is an order of magnitude higher than model predictions calibrated with stony fireballs. We suggest that large disparities between optical and acoustic energies could be a signature of iron fireballs and hence useful as a discriminant of that population.https://papers.cool/arxiv/2408.04099In-situ data extraction for pathway analysis in an idealized atmosphere configuration of E3SM2024-08-09T00:00:00+00:00Andrew SteyerLuca BertagnaGraham HarperJerry WatkinsIrina TezaurDiana BullWe propose an approach for characterizing source-impact pathways, the interactions of a set of variables in space-time due to an external forcing, in climate models using in-situ analyses that circumvent computationally expensive read/write operations. This approach makes use of a lightweight open-source software library we developed known as CLDERA-Tools. We describe how CLDERA-Tools is linked with the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM) in a minimally invasive way for in-situ extraction of quantities of interested and associated statistics. Subsequently, these quantities are used to represent source-impact pathways with time-dependent directed acyclic graphs (DAGs). The utility of CLDERA-Tools is demonstrated by using the data it extracts in-situ to compute a spatially resolved DAG from an idealized configuration of the atmosphere with a parameterized representation of a volcanic eruption known as HSW-V.https://papers.cool/arxiv/2408.04115Electronic structure and optical properties of halide double perovskites from a Wannier-localized optimally-tuned screened range-separated hybrid functional2024-08-09T00:00:00+00:00Francisca SagredoStephen E. GantGuy OhadJonah B. HaberMarina R. FilipLeeor KronikJeffrey B. NeatonHalide double perovskites are a chemically-diverse and growing class of compound semiconductors that are promising for optoelectronic applications. However, the prediction of their fundamental gaps and optical properties with density functional theory (DFT) and {\it ab initio} many-body perturbation theory has been a significant challenge. Recently, a nonempirical Wannier-localized optimally-tuned screened range-separated hybrid (WOT-SRSH) functional has been shown to accurately produce the fundamental band gaps of a wide set of semiconductors and insulators, including lead halide perovskites. Here we apply the WOT-SRSH functional to five halide double perovskites, and compare the results with those obtained from other known functionals and previous $GW$ calculations. We also use the approach as a starting point for $GW$ calculations and we compute the band structures and optical absorption spectrum for Cs\textsubscript{2}Ag{Bi}Br\textsubscript{6}, using both time-dependent DFT and the $GW$-Bethe-Salpeter equation approach. We show that the WOT-SRSH functional leads to accurate fundamental and optical band gaps, as well as optical absorption spectra, consistent with spectroscopic measurements, thereby establishing WOT-SRSH as a viable method for the accurate prediction of optoelectronic properties of halide double perovskites.https://papers.cool/arxiv/2408.04141High Performance MoS2 Phototransistors Photogated by PN Junction2024-08-09T00:00:00+00:00Seyed Saleh Mousavi KhaleghiJianyong WeiYumeng LiuZhengfang FanKai LiKenneth B. CrozierYaping DanPhotodetectors based on two-dimensional (2D) atomically thin semiconductors suffer from low light absorption, limiting their potential for practical applications. In this work, we demonstrate a high-performance MoS2 phototransistors by integrating few-layer MoS2 on a PN junction formed in a silicon (Si) substrate. The photovoltage created in the PN junction under light illumination electrically gates the MoS2 channel, creating a strong photoresponse in MoS2. We present an analytical model for the photoresponse of our device and show that it is in good agreement with measured experimental photocurrent in MoS2 and photovoltage in the Si PN junction. This device structure separates light absorption and electrical response functions, which provides us an opportunity to design new types of photodetectors. For example, incorporating ferroelectric materials into the gate structure can produce a negative capacitance that boosts gate voltage, enabling low power, high sensitivity phototransistor; this, combined with separating light absorption and electrical functions, enables advanced high-performance photodetectors.https://papers.cool/arxiv/2408.04156Structure functions with higher-order stencils as a probe to separate small- and large-scale magnetic fields2024-08-09T00:00:00+00:00Amit SetaChristoph FederrathMagnetic fields are an energetically important component of star-formation galaxies, but it is often difficult to measure their properties from observations. One of the complexities stems from the fact that the magnetic fields, especially in spiral galaxies, have a two-scale nature: a large-scale field, coherent over ${\rm kpc}$ scales and a small-scale, random field with a scale of $\lesssim$ $100~{\rm pc}$. Moreover, it is known that the strength of small- and large-scale fields are comparable and this makes it even harder to find their imprints in radio polarisation observations such as the Faraday rotation measure, ${\rm RM}$, which is the integral over the path length of the product of the thermal electron density and the parallel component of the magnetic field to the line of sight. Here, we propose and demonstrate the use of second-order structure functions of ${\rm RM}$ computed with multiple higher-order stencils as a powerful analysis to separate the small- and large-scale magnetic field components. In particular, we provide new methods and calibrations to compute the scale and the strength of the large-scale magnetic field in the presence of small-scale magnetic fluctuations. We then apply the method to find the scale of large-scale magnetic fields in the nearby galaxies M51 and NGC 6946, using archival data and further discuss the need for computing the ${\rm RM}$ structure functions with higher-order stencils. With multiple modern radio polarisation observatories and eventually the Square Kilometre Array, ${\rm RM}$ observations will significantly improve in quantity and quality, and the higher-order stencil structure function techniques developed here can be used to extract information about multiscale magnetic fields in galaxies.https://papers.cool/arxiv/2408.04160Proposal for realizing quantum-spin systems on a two-dimensional square lattice with Dzyaloshinskii-Moriya interaction by the Floquet engineering using Rydberg atoms2024-08-09T00:00:00+00:00Hiroki KujiMasaya KunimiTetsuro NikuniWe theoretically propose a method for implementing the Hamiltonian incorporating Heisenberg and Dzyaloshinskii-Moriya (DM) interactions within Rydberg atoms arranged in a two-dimensional square lattice, utilizing Floquet engineering. In our scheme, we use both global and local operations of the spins. The global operations can be realized by applying the microwave and the local operations can be realized by the locally addressing lasers, which yields the ac-Stark shift. Since our engineered Hamiltonian contains bond-dependent DM interactions, we expect the emergence of quantum skyrmions in the ground state.https://papers.cool/arxiv/2408.04173Ionic structure, Liquid-liquid phase transitions, X-Ray diffraction, and X-Ray Thomson scattering in shock compressed liquid Silicon in the 100-200 GPa regime2024-08-09T00:00:00+00:00M. W. C. Dharma-wardanaDennis D. KlugHannah PooleG. GregoriRecent cutting-edge experiments have provided $in\,situ$ structure characterization and measurements of the pressure ($P$), density ($\bar{\rho}$) and temperature ($T$) of shock compressed silicon in the 100 GPa range of pressures and up to $\sim$10,000K. We present first-principles calculations in this $P,T,\bar{\rho}$ regime to reveal a plethora of novel liquid-liquid phase transitions (LPTs), making the interpretation of these experiments very challenging. The short-ranged ionic structure of the fluid is preserved under collective adjustments of many distant atoms when subject to compression and heating, with surprisingly little change in electrical and thermal conductivities $\sigma$ and $\kappa$. We match the experimental X-Ray Thompson scattering and X-ray diffraction data theoretically, and provide pressure isotherms, ionization data and compressibilities that support the above picture of liquid silicon as a highly complex LPT-driven ``glassy'' metallic liquid. These novel results are relevant to materials research, studies of planetary interiors, high-energy-density physics, and in laser-fusion studies.https://papers.cool/arxiv/2408.04180From Safeguards Application to Fundamental Physics: Advancements in Reactor Neutrino Detection with the ν-Angra Experiment2024-08-09T00:00:00+00:00E. KempM. P. AlbuquerqueJ. C. AnjosP. ChimentiL. F. G. GonzalezG. P. GuedesP. V. GuillaumonH. P. Lima Jr.A. MassafferriL. M. Domingues MendesR. A. NóbregaI. M. PepeW. V. SantosOperating on a surface with high noise rates and requiring susceptible, yet small-scale detectors, the Neutrinos-Angra detector is an excellent platform for technological development and expertise in new detection methods. This report details the primary features of the detector, the electronics involved, and preliminary physics results from the operational phase, particularly the ON-OFF analysis comparing the signals with the reactor in operation (ON) and during the maintenance shut-down (OFF), demonstrating the detector's capability to monitor reactor activity. Additionally, we will briefly discuss the prospects of using a cryogenic calorimeter to detect neutrinos via Coherent Elastic Neutrino-Nucleus Scattering (CEvNS), highlighting potential advancements in neutrino detection technology. Looking ahead, the project promises to play a crucial role in the integration of Latin American scientists and engineers into global scientific collaborations, significantly contributing to the LASF4RI and the broader HECAP strategic framework.https://papers.cool/arxiv/2408.04208Visibility Analysis of the Sun as Viewed from Multiple Spacecraft at the Sun-Earth Lagrange Points2024-08-09T00:00:00+00:00Jinsung LeeSung-Hong ParkArik PosnerKyung-Suk ChoJaemyung AhnBeyond the Sun-Earth line, spacecraft equipped with various solar telescopes are intended to be deployed at several different vantage points in the heliosphere to carry out coordinated, multi-view observations of the Sun and its dynamic activities. In this context, we investigate solar visibility by imaging instruments onboard the spacecraft orbiting the Sun-Earth Lagrange points L1, L4 and L5, respectively. An optimal arrival time for vertical periodic orbits stationed at L4 and L5 is determined based on geometric considerations that ensure maximum visibility of solar poles or higher latitudes per year. For a different set of orbits around the three Lagrange points (L1, L4 and L5), we calculate the visibility of the solar surface (i.e., observation days per year) as a function of the solar latitude. We also analyze where the solar limb viewed from one of the three Sun-Earth Lagrange points under consideration is projected onto the solar surface visible to the other two. This analysis particularly aims at determining the feasibility of studying solar eruptions, such as flares and coronal mass ejections, with coordinated observations of off-limb erupting coronal structures and their on-disk magnetic footpoints. In addition, visibility analysis of a feature (such as sunspots) on the solar surface is made for multiple spacecraft in various types of orbits with different inclinations to quantify the improvement in continuous tracking of the target feature for studying its long-term evolution from emergence, growth and to decay. A comprehensive comparison of observations from single (L1), double (L1 and L4) and multi-space missions (L1, L4 and L5) is carried out through our solar visibility analysis, and this may help us to design future space missions of constructing multiple solar observatories at the Sun-Earth Lagrange points.https://papers.cool/arxiv/2408.04279Measurement of the $s$-wave scattering length between metastable helium isotopes2024-08-09T00:00:00+00:00S. KannanY. S. AthreyaA. H. AbbasX. T. YanS. S. HodgmanA. G. TruscottWe report the first experimental determination of the interspecies $s$-wave scattering length\,($a_{34}$) between the $2\,^3S_1\,(F=3/2,m_F=3/2)$ state of $^3$He$^*$ and the $2\,^3S_1\,(m_J=1)$ state of $^4$He$^*$. We determine $a_{34}$ by inducing oscillations in a trapped Bose-Einstein condensate of $^4$He$^*$ and measuring the damping rate of these oscillations due to the presence of $^3$He$^*$ atoms. The deduced value of $a_{34}=29\pm3$\,nm is in good agreement with theoretical predictions. The knowledge of this scattering length is important for many fundamental experiments between these helium isotopes.https://papers.cool/arxiv/2408.04319Vorticity blowup in compressible Euler equations in $\mathbb{R}^d, d \geq 3$2024-08-09T00:00:00+00:00Jiajie ChenWe prove finite-time vorticity blowup in the compressible Euler equations in $\mathbb{R}^d$ for any $d \geq 3$, starting from smooth, localized, and non-vacuous initial data. This is achieved by lifting the vorticity blowup result from [CCSV24] in $\mathbb{R}^2$ to $\mathbb{R}^d$ and utilizing the axisymmetry in $\mathbb{R}^d$. At the time of the first singularity, both vorticity blowup and implosion occur on a sphere $S^{d-2}$. Additionally, the solution exhibits a non-radial implosion, accompanied by a stable swirl velocity that is sufficiently strong to initially dominate the non-radial components and to generate the vorticity blowup.https://papers.cool/arxiv/2408.04434Surface potentials of conductors in electrolyte solutions2024-08-09T00:00:00+00:00Olga I. VinogradovaElena F. SilkinaEvgeny S. AsmolovWhen we place conducting bodies in electrolyte solutions, their surface potential $\Phi_s$ appears to be much smaller in magnitude than the intrinsic one $\Phi_0$ and normally does not obey the classical electrostatic boundary condition of a constant surface potential expected for conductors. In this paper, we demonstrate that an explanation of these observations can be obtained by postulating that diffuse ions condense at the "wall" due to a reduced permittivity of a solvent. For small values of $\Phi_0$ the surface potential responds linearly. On increasing $\Phi_0$ further $\Phi_s$ augments nonlinearly and then saturates to a constant value. Analytical approximations for $\Phi_s$ derived for these three distinct modes show that it always adjusts to salt concentration, which is equivalent to a violation of the constant potential condition. The latter would be appropriate for highly dilute solutions, but only if $\Phi_0$ is small. Surprisingly, when the plateau with high $\Phi_s$ is reached, the conductor surface switches to a constant charge density condition normally expected for insulators. Our results are directly relevant for conducting electrodes, mercury drops, colloidal metallic particles and more.https://papers.cool/arxiv/2408.04520Advancing Molecular Machine (Learned) Representations with Stereoelectronics-Infused Molecular Graphs2024-08-09T00:00:00+00:00Daniil A. BoikoThiago ReschützeggerBenjamin Sanchez-LengelingSamuel M. BlauGabe GomesMolecular representation is a foundational element in our understanding of the physical world. Its importance ranges from the fundamentals of chemical reactions to the design of new therapies and materials. Previous molecular machine learning models have employed strings, fingerprints, global features, and simple molecular graphs that are inherently information-sparse representations. However, as the complexity of prediction tasks increases, the molecular representation needs to encode higher fidelity information. This work introduces a novel approach to infusing quantum-chemical-rich information into molecular graphs via stereoelectronic effects. We show that the explicit addition of stereoelectronic interactions significantly improves the performance of molecular machine learning models. Furthermore, stereoelectronics-infused representations can be learned and deployed with a tailored double graph neural network workflow, enabling its application to any downstream molecular machine learning task. Finally, we show that the learned representations allow for facile stereoelectronic evaluation of previously intractable systems, such as entire proteins, opening new avenues of molecular design.https://papers.cool/arxiv/2408.04571Understanding the Optoelectronic Processes in Colloidal 2D Multi-Layered MAPbBr3 Perovskite Nanosheets: Funneling, Recombination and Self-Trapped Excitons2024-08-09T00:00:00+00:00André NieburEugen KleinRostyslav LesyukChristian KlinkeJannika LauthQuasi two-dimensional (2D) colloidal synthesis made quantum confinement readily accessible in perovskites, generating additional momentum in perovskite LED research and lasing. Ultrathin perovskite layers exhibit high exciton binding energies and beneficial charge transport properties interesting for solar cells. In 2D perovskites, the combination of layers with different thickness helps to direct charge carriers in a targeted manner toward thicker layers with a smaller bandgap. However, detailed knowledge about the mechanisms by which excitons and charge carriers funnel and recombine in these structures is lacking. Here, we characterize colloidal 2D methylammonium lead bromide (MAPbBr3) Ruddlesden-Popper perovskites with a broad combination of layers (n = 3 to 10, and bulk fractions with n > 10) in one stack by femtosecond transient absorption spectroscopy and time-resolved photoluminescence, which gives comprehensive insights into the complexity of funneling and recombination processes. We find that after photoexcitation second- and third-order processes dominate in MAPbBr3 nanosheets, which indicates exciton-exciton annihilation (EEA) and Auger recombination. Long-lived excitons in thin layers (e.g., n = 5, Eb = 136 meV) funnel into high n with t = 10-50 ps, which decreases their exciton binding energy below kB T = 26 meV ( T = 300K) and leads to radiative recombination. Parallel and consecutive funneling compete with exciton trapping processes, making funneling an excellent tool to overcome exciton self-trapping when high-quality n-n interfaces are present. Free charge carriers in high n regions on the other hand facilitate radiative recombination and EEA is bypassed, which is desirable for LED and lasing applications.https://papers.cool/arxiv/2408.04622Recoil-free Quantum Gates with Optical Qubits2024-08-09T00:00:00+00:00Zhao ZhangLéo Van DammeMarco RossignoloLorenzo FestaMax MelchnerRobin EberhardDimitrios TsevasKevin MoursEran RechesJohannes ZeiherSebastian BlattImmanuel BlochSteffen J. GlaserAndrea AlbertiWe propose a scheme to perform optical pulses that suppress the effect of photon recoil by three orders of magnitude compared to ordinary pulses in the Lamb-Dicke regime. We derive analytical insight about the fundamental limits to the fidelity of optical qubits for trapped atoms and ions. This paves the way towards applications in quantum computing for realizing $>1000$ of gates with an overall fidelity above 99\%.https://papers.cool/arxiv/2408.03422Next-order balanced model captures submesoscale physics and statistics2024-08-09T00:00:00+00:00Ryan Shìjié DùK. Shafer SmithOliver BühlerUsing nonlinear simulations in two settings, we demonstrate that QG$^\mathrm{+1}$, a potential-vorticity (PV) based next-order-in-Rossby balanced model, captures several aspects of ocean submesoscale physics. In forced-dissipative 3D simulations under baroclinically unstable Eady-type background states, the statistical equilibrium turbulence exhibits long cyclonic tails and a plethora of rapidly-intensifying ageostrophic fronts. Despite that the model requires setting an explicit, small value for the fixed scaling Rossby number, the emergent flows are nevertheless characterized by $O(f)$ vorticity and convergence, as observed in upper-ocean submesoscale flows. Simulations of QG$^\mathrm{+1}$ under the classic strain-induced frontogenesis set-up show realistic frontal asymmetry and a finite time blow-up, quantitatively comparable to simulations of the semigeostrophic equations. The inversions in the QG$^\mathrm{+1}$ model are straightforward elliptic problems, allowing for the reconstruction of all flow fields from the PV and surface buoyancy, while avoiding the semigeostrophic coordinate transformation. Together, these results suggest QG$^\mathrm{+1}$ as a useful tool for studying upper-ocean submesoscale dynamics.https://papers.cool/arxiv/2408.03949Characterization of a Displaced Coaxial Feed for Cascaded Cylindrical Metasurfaces2024-08-09T00:00:00+00:00Chun-Wen LinRichard W. ZiolkowskiAnthony GrbicThis paper characterizes a realistic feed for cylindrical metasurfaces, allowing it to be included in metasurface design. Specifically, it investigates a coaxial feed which is displaced from the center (off-center) of concentrically-cascaded cylindrical metasurfaces. Formulas are reported to quickly compute the multimodal S-matrix (scattering properties) of a displaced feed from that of the central feed. The theory is rigorously derived based on the addition theorem of Hankel functions for all azimuthal modes. Moreover, the resulting multimodal S-matrix is combined with the multimodal wave matrix theory used to model cylindrical metasurfaces, allowing devices to be designed that realize arbitrary field transformations from a displaced coaxial feed. A design example is reported, which opens new opportunities in the realization of realistic, high-performance cylindrical-metasurface-based devices.https://papers.cool/arxiv/2408.03952The marginal majority effect: when social influence produces lock-in2024-08-09T00:00:00+00:00Alexandros GelastopoulosPantelis P. AnalytisGaël Le MensArnout van de RijtPeople are influenced by the choices of others, a phenomenon observed across contexts in the social and behavioral sciences. Social influence can lock in an initial popularity advantage of an option over a higher quality alternative. Yet several experiments designed to enable social influence have found that social systems self-correct rather than lock-in. Here we identify a behavioral phenomenon that makes inferior lock-in possible, which we call the 'marginal majority effect': A discontinuous increase in the choice probability of an option as its popularity exceeds that of a competing option. We demonstrate the existence of marginal majority effects in several recent experiments and show that lock-in always occurs when the effect is large enough to offset the quality effect on choice, but rarely otherwise. Our results reconcile conflicting past empirical evidence and connect a behavioral phenomenon to the possibility of social lock-in.https://papers.cool/arxiv/2408.03965A Workflow-Centric Approach to Generating FAIR Data Objects for Mechanical Properties of Materials2024-08-09T00:00:00+00:00Ronak ShoghiAlexander HartmaierFrom a data perspective, the field of materials mechanics is characterized by a sparsity of available data, mainly due to the strong microstructure-sensitivity of properties such as strength, fracture toughness, and fatigue limit. Consequently, individual tests are needed for specimens with various thermo-mechanical process histories, even if their chemical composition remains the same. Experimental data on the mechanical behavior of materials is usually rare, as mechanical testing is typically a destructive method requiring large amounts of material and effort for specimen preparation and testing. Furthermore, mechanical behavior is typically characterized in simplified tests under uniaxial loading conditions, whereas a complete characterization of mechanical material behavior requires multiaxial testing conditions. To address this data sparsity, different simulation methods, such as micromechanical modeling or even atomistic simulations, can contribute to microstructure-sensitive data collections. These methods cover a wide range of materials with different microstructures characterized under multiaxial loading conditions. In the present work, we describe a novel data schema that integrates metadata and mechanical data itself, following the workflows of the material modeling processes by which the data has been generated. Each run of this workflow results in unique data objects due to the incorporation of various elements such as user, system, and job-specific information in correlation with the resulting mechanical properties. Hence, this integrated data format provides a sustainable way of generating data objects that are Findable, Accessible, Interoperable, and Reusable (FAIR). The choice of metadata elements has centered on necessary features required to characterize microstructure-specific data objects, simplifying how purpose-specific datasets are collected by search algorithms.https://papers.cool/arxiv/2408.03968Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 20242024-08-09T00:00:00+00:00J. VieiraB. CrosP. MuggliI. A. AndriyashO. ApsimonM. BackhouseC. BenedettiS. S. BulanovA. CaldwellMin ChenV. CilentoS. CordeR. D'ArcyS. DiederichsE. EricsonE. EsareyJ. FarmerL. FedeliA. FormentiB. FosterM. GartenC. G. R. GeddesT. GrismayerM. J. HoganS. HookerA. HueblS. JalasM. KirchenR. LeheW. LeemansBoyuan LiC. A. LindströmR. LositoC. E. MitchellW. B. MoriP. MuggliD. TerzaniM. ThévenetM. TurnerJ. -L. VayJ. VieiraD. VölkerJie ZhangW. ZhangThe workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $\gamma\gamma$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.https://papers.cool/arxiv/2408.04039Broadband mode exchanger based on subwavelength Y-junctions2024-08-09T00:00:00+00:00Raquel Fernández de CaboAlejandro Sánchez-SánchezYijun YangDaniele MelatiCarlos Alonso-RamosAitor V. VelascoDavid González-AndradeMultimode silicon photonics, leveraging mode-division multiplexing technologies, offers significant potential to increase capacity of large-scale multiprocessing systems for on-chip optical interconnects. These technologies have implications not only for telecom and datacom applications, but also for cutting-edge fields such as quantum and nonlinear photonics. Thus, the development of compact, low-loss and low-crosstalk multimode devices, in particular mode exchangers, is crucial for effective on-chip mode manipulation. This work introduces a novel mode exchanger that exploits the properties of subwavelength grating metamaterials and symmetric Y-junctions, achieving low losses and crosstalk over a broad bandwidth and a compact size of only 6.5 {\mu}m {\times} 2.6 {\mu}m. The integration of SWG nanostructures in our design enables precise control of mode exchange through different propagation constants in the arms and metamaterial, and takes advantage of dispersion engineering to broaden the operating bandwidth. Experimental characterization demonstrates, to the best of our knowledge, the broadest operational bandwidth covering from 1420 nm to 1620 nm, with measured losses as low as 0.5 dB and extinction ratios higher than 10 dB. Enhanced performance is achieved within a 149 nm bandwidth (1471-1620 nm), showing measured losses below 0.4 dB and extinction ratios greater than 18 dB.https://papers.cool/arxiv/2408.04047Proper orthogonal decomposition analysis of square lid driven cavity flows containing particle suspensions2024-08-09T00:00:00+00:00John SheltonNitin KatikiMorakinyo AdesemowoContinual perturbations to the flow field in the square lid driven cavity can significantly impact both its stability and the dynamic characteristics of the system. In this study, the effect of these perturbations are analyzed via computational fluid dynamics simulations of a square, two-dimensional, lid driven cavity containing varying area fractions of suspended particles. The evolution over time of these particle-particle and particle-fluid interactions generate two-dimensional disturbance velocity changes in the flow field. In order to better understand the characteristics and effects of these changes, proper orthogonal decomposition analysis is performed on the velocity difference flow field to determine the dominant flow structures over the simulation time domain. The resulting eigenvectors and eigenvalues represent the varying dominant flow structures and their respective dominance over the simulation time, respectively. This is carried out at particle suspension area fractions from 10\% - 50\% and for Reynolds numbers of 100, 400, 700, and 1000. Critical flow regimes and particle suspension area fractions are discussed in order to characterize the stability of this particle-in-fluid system.https://papers.cool/arxiv/2408.04070Integrating Evolutionary Biology into Physics Classroom: Scaling, Dimension, Form and Function2024-08-09T00:00:00+00:00Kausik S DasLarry GonickSalem Al MoslehSince Galileo and (more recently) D'Arcy Thompson, it has been understood that physical processes and constraints influence biological structures and their resulting functions. However these cross-discpline connections -- and their importance to growing scientific discplines such as biophysics -- are rarely tought in introductory physics courses. Here we examine how the laws of physics shape Darwinism evolution through the surface area to volume ratio, an important geometric measure of a structure. We develop conceptual cartoon clicker questions to enhance students' understanding of these interdisciplinary concepts. By connecting abstract physical laws with biological (and technological) applications, our approach aims to help students appreciate the deep connections between physical and biological sciences, thereby enriching the learning experience in introductory physics courses.https://papers.cool/arxiv/2408.04073Accelerating crystal structure search through active learning with neural networks for rapid relaxations2024-08-09T00:00:00+00:00Stefaan S. P. HessmannKristof T. SchüttNiklas W. A. GebauerMichael GasteggerTamio OguchiTomoki YamashitaGlobal optimization of crystal compositions is a significant yet computationally intensive method to identify stable structures within chemical space. The specific physical properties linked to a three-dimensional atomic arrangement make this an essential task in the development of new materials. We present a method that efficiently uses active learning of neural network force fields for structure relaxation, minimizing the required number of steps in the process. This is achieved by neural network force fields equipped with uncertainty estimation, which iteratively guide a pool of randomly generated candidates towards their respective local minima. Using this approach, we are able to effectively identify the most promising candidates for further evaluation using density functional theory (DFT). Our method not only reliably reduces computational costs by up to two orders of magnitude across the benchmark systems Si16 , Na8Cl8 , Ga8As8 and Al4O6 , but also excels in finding the most stable minimum for the unseen, more complex systems Si46 and Al16O24 . Moreover, we demonstrate at the example of Si16 that our method can find multiple relevant local minima while only adding minor computational effort.https://papers.cool/arxiv/2408.04076Multi-scale structural complexity as a quantitative measure of visual complexity2024-08-09T00:00:00+00:00Anna KravchenkoAndrey A. BagrovMikhail I. KatsnelsonVeronica DudarevWhile intuitive for humans, the concept of visual complexity is hard to define and quantify formally. We suggest adopting the multi-scale structural complexity (MSSC) measure, an approach that defines structural complexity of an object as the amount of dissimilarities between distinct scales in its hierarchical organization. In this work, we apply MSSC to the case of visual stimuli, using an open dataset of images with subjective complexity scores obtained from human participants (SAVOIAS). We demonstrate that MSSC correlates with subjective complexity on par with other computational complexity measures, while being more intuitive by definition, consistent across categories of images, and easier to compute. We discuss objective and subjective elements inherently present in human perception of complexity and the domains where the two are more likely to diverge. We show how the multi-scale nature of MSSC allows further investigation of complexity as it is perceived by humans.https://papers.cool/arxiv/2408.04082Design, Construction, and Test of Compact, Distributed-Charge, X-Band Accelerator Systems that Enable Image-Guided, VHEE FLASH Radiotherapy2024-08-09T00:00:00+00:00Christopher P. J. BartyJ. Martin AlgotsAlexander J. AmadorJames C. R. BartyShawn M. BettsMarcelo A. CasteñadaMatthew M. ChuMichael E. DaleyRicardo A. De Luna LopezDerek A. DiviakHaytham H. EffarahRoberto FelicianoAdan GarciaKeith J. GrabielAlex S. GriffinFrederic V. HartemannLeslie HeidYoonwoo HwangGennady ImeshevMichael JentschelChristopher A. JohnsonKenneth W. KinosianAgnese LagzdaRussell J. LochrieMichael W. MayEverardo MolinaChristopher L. NagelHenry J. NagelKyle R. PeirceZachary R. PeirceMauricio E. QuiñonezFerenc RaksiKelanu RanganathTrevor ReutershanJimmie SalazarMitchell E. SchneiderMichael W. L. SeggebruchJoy Y. YangNathan H. YeungCollette B. ZapataLuis E. ZapataEric J. ZepedaJingyuan ZhangThe design and optimization of laser-Compton x-ray systems based on compact distributed charge accelerator structures can enable micron-scale imaging of disease and the concomitant production of beams of Very High Energy Electrons (VHEEs) capable of producing FLASH-relevant dose rates. The physics of laser-Compton x-ray scattering ensures that the scattered x-rays follow exactly the trajectory of the incident electrons, thus providing a route to image-guided, VHEE FLASH radiotherapy. The keys to a compact architecture capable of producing both laser-Compton x-rays and VHEEs are the use of X-band RF accelerator structures which have been demonstrated to operate with over 100 MeV/m acceleration gradients. The operation of these structures in a distributed charge mode in which each radiofrequency (RF) cycle of the drive RF pulse is filled with a low-charge, high-brightness electron bunch is enabled by the illumination of a high-brightness photogun with a train of UV laser pulses synchronized to the frequency of the underlying accelerator system. The UV pulse trains are created by a patented pulse synthesis approach which utilizes the RF clock of the accelerator to phase and amplitude modulate a narrow band continuous wave (CW) seed laser. In this way it is possible to produce up to 10 {\mu}A of average beam current from the accelerator. Such high current from a compact accelerator enables production of sufficient x-rays via laser-Compton scattering for clinical imaging and does so from a machine of "clinical" footprint. At the same time, the production of 1000 or greater individual micro-bunches per RF pulse enables > 10 nC of charge to be produced in a macrobunch of < 100 ns. The design, construction, and test of the 100-MeV class prototype system in Irvine, CA is also presented.https://papers.cool/arxiv/2408.04153Asymmetry of imploding detonations in thin channels2024-08-09T00:00:00+00:00Sebastian Rodriguez RoseroJason LoiseauAndrew J. HigginsThe factors that influence the symmetry of an imploding detonation are investigated experimentally and theoretically. Detonations in sub-atmospheric acetylene-oxygen were initiated and made to converge in an apparatus that followed that of Lee and Lee (Phys Fluids 8:2148-2152, 1965). The width of the test section was controlled with a wave-shaping insert, which formed the test section against the viewing window, creating an effectively two-dimensional problem with a channel width comparable to the detonation cell size. The convergence of the detonation was observed via self-luminous open-shutter photography and high-speed videography. The resulting videos were analyzed to quantify the wave speed, degree of asymmetry, and direction and magnitude of the offset in the center of convergence. To determine the experimental parameters that influence the symmetry of the imploding wave, the wave-shaping insert was intentionally canted by 0.3{\deg}-0.6{\deg}, accentuating the asymmetry of the imploding detonation. The experiment was modeled using a Huygens construction wherein the detonation is treated as a collection of wavelets, each assumed to propagate locally at a velocity determined by the channel width. The results of the model reproduced the observed offsets in detonation convergence from the center of the apparatus, confirming that velocity deficits resulting from the narrow channel width control the observed asymmetry.https://papers.cool/arxiv/2408.04183Quantum-Enhanced Polarimetric Imaging2024-08-09T00:00:00+00:00Meng-Yu XieSu-Jian NiuZhao-Qi-Zhi HanYin-Hai LiRen-Hui ChenXiao-Hua WangMing-Yuan GaoLi ChenYue-Wei SongZhi-Yuan ZhouBao-Sen ShiPolarimetric imaging, a technique that captures the invisible polarization-related properties of given materials, has broad applications from fundamental physics to advanced fields such as target recognition, stress detection, biomedical diagnosis and remote sensing. The introduction of quantum sources into classical imaging systems has demonstrated distinct advantages, yet few studies have explored their combination with polarimetric imaging. In this study, we present a quantum polarimetric imaging system that integrates polarization-entangled photon pairs into a polarizer-sample-compensator-analyzer (PSRA)-type polarimeter. Our system visualizes the birefringence properties of a periodical-distributed anisotropic material under decreasing illumination levels and diverse disturbing light sources. Compared to the classical system, the quantum approach reveals the superior sensitivity and robustness in low-light conditions, particularly useful in biomedical studies where the low illumination and non-destructive detection are urgently needed. The study also highlights the nonlocality of entangled photons in birefringence measurement, indicating the potential of quantum polarimetric system in the remote sensing domain.https://papers.cool/arxiv/2408.04231Calculation of the correlation, relativistic and QED corrections to the total electron binding energy in atoms and their nuclear charge dependence2024-08-09T00:00:00+00:00V. A. DzubaV. V. FlambaumA. V. AfanasjevWe present relativistic many-body calculations of total electron binding energy of neutral atoms up to element $Z=120$. Binding energy for ions may be found by subtracting known ionization potentials. Accuracy of the results for $17<Z \le105$ significantly exceeds that in NIST tables (there are no data for $Z>105$ there). We fit numerical results for binding energies by analytical function of $Z$. We also calculate numerical values and determine dependence on $Z$ of the correlation corrections, Dirac and Breit relativistic corrections and quantum electrodynamics (QED) corrections.https://papers.cool/arxiv/2408.04240Contact angle hysteresis and static friction for 2-dimensional droplets2024-08-09T00:00:00+00:00Jong-In YangJooyoo HongContact angle hysteresis of droplets will be examined in light of static friction between liquid drop and solid surface. Unlike frictions in solid-solid interfaces, pinning forces at contact points (2D) or contact lines (3D) would be the cause of friction. We will define coefficients of static friction and relate them with advancing and receding contact angles for the case of 2-dimensional droplets. In our work sessile drops in an inclined plane, and pendent drops in a slanted ceiling will all be analyzed within a single framework with the inclination angle as a free parameter. We can then visualize the gradual change of shapes of a droplet put on a plane as the inclination angle changes adiabatically to make a complete turn. We also point out that there could be two distinct stable configurations of pendent droplets for the same physical conditions, i.e. the bifurcation.https://papers.cool/arxiv/2408.04248Absorption and scattering properties of nanoparticles in an absorbing medium: revisiting with experimental validation2024-08-09T00:00:00+00:00Pham Thi HongNguyen Trung KienNguyen Viet TuyenHung Q. NguyenH. T. M. NghiemAbsorption and scattering properties of nanoparticles immersed in an absorbing medium are essential in understanding the overall properties of composites and in designing materials with expected functionalities. In this paper, we establish the model that links the absorption and scattering coefficients of individual particles with the reflectance and transmittance spectra of thin-film composite, supported by well-controlled experiments. Thin films consisting of TiO$_2$ nanoparticles embedded in PMMA are fabricated on glass substrates using spin-coating and then peeled off to form standalone samples for spectroscopy measurements. The absorption $K$ and scattering $S$ coefficients of multiple nanoparticles are calculated from the measured transmittance and reflectance using the Kubelka-Munk theory in combination with the Saunderson correction. From the theoretical side, the absorption $K$ and scattering $S$ coefficients are the accumulation of absorption and scattering of individual particles, which are derived from the Mie theory. The agreement between the $K$ and $S$ coefficients extracted from experimental data and from theoretical calculations gives deep insight into the significant attenuating effect of absorption and scattering on each particle due to the surrounding medium. Furthermore, the validated model of nanoparticles immersed in an absorbing medium can be used to obtain the preliminary results for materials designed toward radiative cooling.https://papers.cool/arxiv/2408.04250The oscillating and vibrating cylinder: a benchmark to study low Mach number aeroacoustics2024-08-09T00:00:00+00:00Étienne SpieserSiyang ZhongXin ZhangHydrodynamic and acoustic scales separate as the Mach number decreases, making the modelling of aeroacoustic phenomena singular in this flow regime. The benchmark of the flow developing around an oscillating and vibrating cylinder is one of the scarce configuration that is fully analytically tractable, and is thus precious in the validation of new theories or solvers. This work carefully derives the complete incompressible flow solution for this case, extending the axisymmetric results of the literature to more complex cylinder motion. High-order finite element method solution of the incompressible Navier-Stokes equations provide a reference to validate the analytical formulae derived here. Both analytical and numerical investigations agree on an independence of the configuration to the Reynolds number. Up to the critical Reynolds number, found to lie above $10^4$, the hydrodynamic solution of this configuration is solely governed by the Stokes number. The exact expression of the sound radiated in the far field is computed by accounting for the cylinder scattering by means of tailored Green's functions.https://papers.cool/arxiv/2408.04269Energy Method and Stability of Shear Flows: an Elementary Tutorial2024-08-09T00:00:00+00:00Antonio BarlettaGiuseppe MuloneThis paper provides a pedagogical introduction to the classical nonlinear stability analysis of the plane Poiseuille and Couette flows. The whole procedure is kept as simple as possible by presenting all the logical steps involved in the application of the energy method and leading to the Euler-Lagrange equations. Then, the eigenvalue problems needed for the evaluation of the nonlinear energy threshold of the Reynolds number for stability are formulated for transverse modes and for longitudinal modes. Such formulations involve the streamfunction and, in the case of longitudinal modes, also the streamwise component of velocity. An accurate numerical solution of the eigenvalue problems, based on Galerkin's method of weighted residuals with the test functions expressed in terms of Chebyshev polynomials, is discussed in details. The numerical codes developed for the software Mathematica 14 (\copyright{} Wolfram Research, Inc.) are also presented. A critical analysis of the obtained results is finally proposed.https://papers.cool/arxiv/2408.04274Field of View Expansion for Resonant Beam Information and Power Transfer2024-08-09T00:00:00+00:00Shun HanWen FangMingqing LiuMengyuan XuShuaifan XiaQingwen LiuSimultaneous wireless information and power transfer (SWIPT) leverages lightwave as the wireless transmission medium, emerging as a promising technology in the future Internet of Things (IoT) scenarios. The use of retro-reflectors in constructing spatially separated laser resonators (SSLR) enables a self-aligning wireless transmission system with the self-reproducing resonant beam, i.e. resonant beam system (RBS). However, it's effective Field of View (FoV) is physically limited by the size of retroreflectors and still requires significant improvement. This restricts the transmitter from providing seamless wireless connectivity and power supply to receivers within a large dynamic movement range. In this paper, we propose an FoV-enlarged resonant beam system operating at a meter distance by incorporating a telescope. The telescope plays a crucial role in minimizing the extra loss inflicted on the gain medium, which typically arises from the deviation of the resonant beam within the cavity. Further, we construct the proposed telescope-based RBS and experimentally demonstrate that the design could expand the FoV to 28$^\circ$ over 1 m transmission distance is about triple that of the ordinary RBS design.https://papers.cool/arxiv/2408.04286Stability Mechanisms of Unconventional Stoichiometric Crystals Exampled by Two-Dimensional Na2Cl on Graphene under Ambient Conditions2024-08-09T00:00:00+00:00Liuhua MuXuchang SuHaiping FangLei ZhangCompounds harboring active valence electrons, such as unconventional stoichiometric compounds of main group elements including sodium, chlorine, and carbon, have conventionally been perceived as unstable under ambient conditions, requiring extreme conditions including extra-high pressure environments for stability. Recent discoveries challenge this notion, showcasing the ambient stability of two-dimensional Na2Cl and other unconventional stoichiometric compounds on reduced graphene oxide (rGO) membranes. Focusing on the Na2Cl crystal as a case study, we reveal a mechanism wherein electron delocalization on the aromatic rings of graphene effectively mitigates the reactivity of Na2Cl, notably countering oxygen-induced oxidation--a phenomenon termed the Surface Delocalization-Induced Electron Trap (SDIET) mechanism. Theoretical calculations also show a substantial activation energy barrier emerges, impeding oxygen infiltration into and reaction with Na2Cl. The remarkable stability was further demonstrated by the experiment that Na2Cl crystals on rGO membranes remain almost intact even after prolonged exposure to a pure oxygen atmosphere for 9 days. The discovered SDIET mechanism presents a significant leap in stabilizing chemically active substances harboring active valence electrons under ambient conditions. Its implications transcend unconventional stoichiometric compounds, encompassing main group and transition element compounds, potentially influencing various scientific disciplines.https://papers.cool/arxiv/2408.04302Quantifying intra-regime weather variability for energy applications2024-08-09T00:00:00+00:00Judith GerighausenJoshua DorringtonMarisol OsmanChristian M. GramsWeather regimes describe the large-scale atmospheric circulation in the mid-latitudes in terms of a few circulation states that modulate regional surface weather. Subseasonal forecasts of prevailing weather regimes have proven skillful and valuable to energy applications. Previous studies have mainly focused on the mean surface weather associated with a regime. However, we show in this paper that variability of surface weather within a regime cannot be ignored. These intra-regime variations, caused by different `subflavors' of the same regime, can be captured by continuous regime indices and allow a refined application of weather regimes. Here we discuss wintertime temperature and wind speed regime anomalies for four selected countries, and provide guidance on the operational use and interpretation of regime forecasts. In an accompanying supplementary dataset we provide similar analysis for all European countries, seasons and key energy variables, useful as an applied reference.https://papers.cool/arxiv/2408.04314Modeling the Influence of Solvation on the Electrochemical Double Layer of Salt / Solvent Mixtures2024-08-09T00:00:00+00:00Constantin SchwetlickMax SchammerArnulf LatzBirger HorstmannModelling electrolytes accurately on both a nanoscale and cell level can contribute to improving battery chemistries.[Armand and Tarascon, Nature, 2008, 451, 652-657] We previously presented a thermodynamic continuum model for electrolytes.[arXiv:2010.14915] In this paper we include solvation interactions between the ions and solvent, which alter the structure of the electochemical double layer (EDL). We are able to combine a local solvation model -- permitting examination of the interplay between electric forces and the ion-solvent binding -- with a full electrolyte model. Using this, we can investigate double layer structures for a wide range of electrolytes, especially including highly concentrated solutions. We find that some of the parameters of our model significantly affect the solvent concentration at the electrode surface, and thereby the rate of solvent decomposition. Firstly, an increased salt concentration weakens the solvation shells, making it possible to strip the solvent in the EDL before the ions reach the surface. The strength of the ion-solvent interaction also affects at which potential difference the solvation shells removed. We are therefore able to qualitatively predict EDL structures for different electrolytes based on parameters like molecule size, solvent binding energy and salt concentration.https://papers.cool/arxiv/2408.04356Fock-space perturbed relativistic coupled-cluster calculations of electric dipole polarizability and nuclear spin-dependent parity non-conservation in Cs2024-08-09T00:00:00+00:00Suraj PandeyRavi KumarD. AngomB. K. ManiWe implement the Fock-space perturbed relativistic coupled-cluster theory to compute the electric dipole polarizability of ground and low lying excited states, and nuclear spin-dependent parity violating transition amplitudes in Cs. Moreover, to check the accuracy of the wavefunctions used in the calculations, we compute the excitation energies, E1 transition amplitudes and magnetic dipole hyperfine constants for ground and low lying excited states. To improve the accuracy of the computed properties, we have incorporated the corrections from the relativistic and QED effects in our calculations. The contributions from triple excitations are accounted perturbatively. Our results on excitation energies, E1 transition amplitudes and hyperfine constants are in good agreement with the experimental results. Our polarizability results using FS-PRCC theory are in good agreement with the experimental data. Our values of parity-violating transition amplitudes are, in general, on the lower side of the previous values. From the analysis of the electron correlations, we find that the corrections from the Breit interaction and QED effects are important to get accurate results of nuclear spin-dependent parity-violating transition amplitudes in Cs. The largest cumulative contribution from Breit and QED corrections is found to be $\approx$ 3.2\% of the total value. The upper bound on the theoretical uncertainty in our calculated parity violating transition amplitudes is estimated to be about 1\%.https://papers.cool/arxiv/2408.04370Stimulated X-ray Raman scattering for selective preparation of dark states bypassing optical selection rules2024-08-09T00:00:00+00:00Francesco MontorsiShaul MukamelFilippo TamassiaMarco GaravelliFrancesco SegattaArtur NenovWe present an X-ray based stimulated Raman approach to control the preparation of optically dark electronic states in generic molecular systems. Leveraging on the unique properties of core-level excited states, we demonstrate that optically forbidden transitions between singlet states, or between singlet and triplet states are made accessible. Two molecular systems are studied as a test-bed of the proposed approach, and its experimental feasibility is eventually discussed.https://papers.cool/arxiv/2408.04373The role of central places in exposure segregation2024-08-09T00:00:00+00:00Andrew RenningerMateo NeiraElsa ArcauteHere we show that "exposure segregation" - the degree to which individuals of one group are exposed to individuals of another in day-to-day mobility - is dependent on the structure of cities, and the importance of downtowns in particular. Recent work uses aggregated data to claim that the location of amenities can inhibit or facilitate interactions between groups: if a city is residentially segregated, as many American cities are, then amenities between segregated communities should encourage them to mix. We show that the relationship between "bridging" amenities and socio-economic mixing breaks down when we examine the amenities themselves, rather than the urban aggregates. For example, restaurants with locations that suggest low expected mixing do not, much of the time, have low mixing: there is only a weak correlation between bridging and mixing at the level of the restaurant, despite a strong correlation at the level of the supermarket. This is because downtowns - and the bundle of amenities that define them - tend not to be situated in bridge areas but play an important role in drawing diverse groups together.https://papers.cool/arxiv/2408.04397Analysis of defect modes in one-dimensional photonic crystals with two defects2024-08-09T00:00:00+00:00A. O. KamenevN. A. VanyushkinI. M. EfimovA. H. GevorgyanIn this paper, for the first time, analytical expressions for determination of the wavelength of defect modes (DMs) in one-dimensional (1D) photonic crystals (PCs) with two defect layers (DLs) were obtained from the condition of zero reflection. Analytical formulas on the conditions for the merging of two DMs and on the DMs with zero value of the reflection coefficient were obtained. Different typical 1D PC structures with two DLs were considered and compared, including their DMs behavior. The distribution of electromagnetic field within the first photonic bandgap (PBG) was analyzed for several cases of DM merging and for the different orders of DMs. The results of this research permit the simplification of the analysis of optical sensors and filters based on 1D PCs with two DLs, as well as a more comprehensive understanding of the DM behavior within the PBGs of such PC structures. Furthermore, this paper helps to explain the results obtained by other researchers earlier in this field, too.https://papers.cool/arxiv/2408.04404Transverse instability of electron-acoustic solitons in a relativistic degenerate astrophysical magnetoplasma2024-08-09T00:00:00+00:00A. P. MisraA. AbdikianWe study the nonlinear theory of small-amplitude electron-acoustic solitons (EASs) in a relativistic astrophysical magnetoplasma consisting of two-temperature electrons: a sparse population of relativistic nondegenerate classical electrons and a group of fully degenerate dense relativistic electrons (main constituent) immersed in a static magnetic field with a neutralizing stationary ion background. By using the multiple-scale reductive perturbation technique with the Lorentz transformation, the Zakharov-Kuznetsov (ZK) and the modified Zakharov-Kuznetsov (mZK) equations are derived to describe the evolution of EASs in two different regimes of relativistic degeneracy: $r_{d0}<50$ and $r_{d0}\gtrsim50$. The characteristics of the plane soliton solutions of ZK and mZK equations and the soliton energy are studied. We show that the solitons moving at an angle $\alpha$ to the external magnetic field can be unstable under transverse long-wavelength perturbations. The growth rates of instabilities are obtained and analyzed with the effects of the relativity parameter $\beta_{\rm{cl}}=k_BT_{\rm{cl}}/m_ec^2$ and the degeneracy parameter $r_{d0}$, where $k_B$ is the Boltzmann constant and $T_{\rm{cl}}$ is the temperature of classical electrons. Interestingly, the ZK solitons, even if it is stable for the first-order perturbations, can be unstable in the second-order correction. Furthermore, while the first-order growth rates of perturbations for ZK solitons tend to vanish as $\alpha\rightarrow 38^\circ$, that for the mZK soliton goes to zero as $\alpha\rightarrow 90^\circ$. However, depending on the angle $\alpha$, the growth rates are found to be reduced either by increasing the values of $\beta_{\rm{cl}}$ or by decreasing the values of $r_{d0}$. The applications of our results to astrophysical plasmas, such as those in the environments of white dwarfs are discussed.https://papers.cool/arxiv/2408.04412Coherent nonlinear Thomson scattering of Laguerre-Gauss beams on an electron sheet2024-08-09T00:00:00+00:00Petru-Vlad TomaAndrei Cristian OpincaVirgil BaranMadalina BocaWe present a study of the scattering of a monochromatic helical laser beam, described by a Laguerre-Gauss solution of the Maxwell equations, on an electron sheet, initially at rest in the focal plane of the laser; the interaction is described in the framework of a local plane wave approximation. We calculate the scattered electromagnetic field observed in an arbitrary point at a large distance from the laser focal spot, by adding coherently the contributions of each electron in the electron sheet. Due to the interference effects, the radiation is emitted only into the forward direction, within a narrow cone, and it has a spatial structure that we analyze theoretically and numerically. For circularly polarized incident fields, the structure is also helical, with a helical index which depends on the helical index of the incident radiation and the harmonic order. These structures can be observed experimentally, as each harmonic order is emitted with a different frequency, and within cones of different opening angles. Our findings are in agreement with experimental results in the literature which demonstrate the generation of OAM carrying photons by radiation scattering on electrons.https://papers.cool/arxiv/2408.04429Exploring the Impact of Cochlear Implant Stimulation Artefacts in EEG Recordings: Unveiling Potential Benefits2024-08-09T00:00:00+00:00Hongmei HuBen WilligesDeborah VickersGiven rising numbers of bilateral cochlear implant (CI) users, predominantly children, there is a clinical need for efficient and reliable tests that can objectively evaluate binaural hearing. These tests are crucial for guiding the setup of bilateral CIs to optimise delivery of binaural cues. Our primary goal is to introduce a clinical electroencephalogram (EEG) procedure to assess binaural hearing function at various stages within the auditory pathway. Previous research demonstrated that bilateral CI users significantly decrease in ability to discriminate interaural time differences when pulse rates exceed 300 pulses per second. Our paradigm utilizes different pulse rates to objectively explore the limits. A notable challenge with this EEG procedure is the interference induced by CI electrical stimulus artefacts. Despite this obstacle, the potential benefits of CI stimulation artefacts often go unnoticed. This paper outlines positive applications of the frequently criticized CI artefacts for optimizing the experiment setup.https://papers.cool/arxiv/2408.04456Modeling information spread across networks with communities using a multitype branching process framework2024-08-09T00:00:00+00:00Alina DubovskayaCaroline B. PenaDavid J. P. O'SullivanThe dynamics of information diffusion in complex networks is widely studied in an attempt to understand how individuals communicate and how information travels and reaches individuals through interactions. However, complex networks often present community structure, and tools to analyse information diffusion on networks with communities are needed. In this paper, we develop theoretical tools using multi-type branching processes to model and analyse simple contagion information spread on a broad class of networks with community structure. We show how, by using limited information about the network -- the degree distribution within and between communities -- we can calculate standard statistical characteristics of the dynamics of information diffusion, such as the extinction probability, hazard function, and cascade size distribution. These properties can be estimated not only for the entire network but also for each community separately. Furthermore, we estimate the probability of information spreading from one community to another where it is not currently spreading. We demonstrate the accuracy of our framework by applying it to two specific examples: the Stochastic Block Model and a log-normal network with community structure. We show how the initial seeding location affects the observed cascade size distribution on a heavy-tailed network and that our framework accurately captures this effect.https://papers.cool/arxiv/2408.04468Topological resonance behaviors of surface acoustic wave under surface liquid-layer loadings and sensing applications2024-08-09T00:00:00+00:00Bowei WuTingfeng MaShuanghuizhi LiBoyue SuPengfei KangIn this work, topological resonance behaviors of surface acoustic wave (SAW) under surface liquid-layer loadings are investigated. The results show that through the coupling of waveguide and resonant cavity, a resonant peak with high Q-factor can emerge, and the frequency of which is significantly sensitive to the liquid parameters. Based on that, a topological-resonance SAW liquid-phase sensor is proposed. The results show that the formation of the topological phase transition is closely related to the liquid-layer loading. Furthermore, by changing the thickness of the liquid-layer loading, the operating-frequency range of the device can be significantly expanded, which is vital for biomedical detecting applications. Based on which, the sensing performances of topological-resonance SAW liquid-phase sensor are simulated, which are used to sensing the concentration of albumin and hemoglobin concentration in blood, and high sensitivities and Q-factors can be obtained for this device. The results presented in this paper can provide an important basis for the realization of highly sensitive and stable SAW biomedical sensors in the future.https://papers.cool/arxiv/2408.04473Klein Tunneling of Gigahertz Elastic Waves in Nanoelectromechanical Metamaterials2024-08-09T00:00:00+00:00Daehun LeeYue JiangXiaoru ZhangShahin JahanbaniChengyu WenQicheng ZhangA. T. Charlie JohnsonKeji LaiKlein tunneling, the perfect transmission of a normally incident relativistic particle through an energy barrier, has been tested in various electronic, photonic, and phononic systems. Its potential in guiding and filtering classical waves in the Ultra High Frequency regime, on the other hand, has not been explored. Here, we report the realization of acoustic Klein tunneling in a nanoelectromechanical metamaterial system operating at gigahertz frequencies. The piezoelectric potential profiles are obtained by transmission-mode microwave impedance microscopy, from which reciprocal-space maps can be extracted. The transmission rate of normally incident elastic waves is near unity in the Klein tunneling regime and drops significantly outside this frequency range, consistent with microwave network analysis. Strong angular dependent transmission is also observed by controlling the launching angle of the emitter interdigital transducer. This work broadens the horizon in exploiting high-energy-physics phenomena for practical circuit applications in both classical and quantum regimes.https://papers.cool/arxiv/2408.04487The graphene-water interface is acidic2024-08-09T00:00:00+00:00Xavier R. AdvinculaKara D. FongAngelos MichaelidesChristoph SchranWater's ability to autoionize into hydroxide and hydronium ions profoundly influences surface properties, rendering interfaces either basic or acidic. While it is well-established that the water-air interface is acidic, a critical knowledge gap exists in technologically relevant surfaces like the graphene-water interface. Here we use machine learning-based simulations with first-principles accuracy to unravel the behavior of the hydroxide and hydronium ions at the graphene-water interface. Our findings reveal that the graphene-water interface is acidic, with the hydronium ion predominantly residing in the first contact layer of water. In contrast, the hydroxide ion exhibits a bimodal distribution, found both near the surface and towards the interior layers. Analysis of the underlying electronic structure reveals strong polarization effects, resulting in counterintuitive charge rearrangement. Proton propensity to the graphene-water interface challenges the interpretation of surface experiments and is expected to have far-reaching consequences for ion conductivity, interfacial reactivity, and proton-mediated processes.https://papers.cool/arxiv/2408.04497SchrödingerNet: A Universal Neural Network Solver for The Schrödinger Equation2024-08-09T00:00:00+00:00Yaolong ZhangBin JiangHua GuoRecent advances in machine learning have facilitated numerically accurate solution of the electronic Schr\"{o}dinger equation (SE) by integrating various neural network (NN)-based wavefunction ansatzes with variational Monte Carlo methods. Nevertheless, such NN-based methods are all based on the Born-Oppenheimer approximation (BOA) and require computationally expensive training for each nuclear configuration. In this work, we propose a novel NN architecture, Schr\"{o}dingerNet, to solve the full electronic-nuclear SE by defining a loss function designed to equalize local energies across the system. This approach is based on a rotationally equivariant total wavefunction ansatz that includes both nuclear and electronic coordinates. This strategy not only allows for the efficient and accurate generation of a continuous potential energy surface at any geometry within the well-sampled nuclear configuration space, but also incorporates non-BOA corrections through a single training process. Comparison with benchmarks of atomic and molecular systems demonstrates its accuracy and efficiency.https://papers.cool/arxiv/2408.04518Magneto-Hydrodynamic Simulations of Pedestal Instabilities for Tokamak Plasmas with Different Ion Masses2024-08-09T00:00:00+00:00Matthias RosenthalIn this bachelor's thesis, isotope effects for pedestal instabilities have been studied based on an ASDEX Upgrade H-Mode scenario. This was done using the JOREK code for extended MHD simulations, including the ion diamagnetic drift and the establishment of ExB flows. Simulations with single toroidal harmonics were performed for multiple times during the build-up of the pedestal, to assess the evolution of the linear stability of modes occurring near the edge. When changing the average ion masses from 2.0 to 2.5 and 3.0, the variations were small, and MHD's momentum equation was shown to be the major cause for them. As a second step, simulations with multiple toroidal harmonics were performed to simulate an Edge Localized Mode (ELM) crash, again comparing between the average ion masses of 2.0, 2.5, and 3.0. The resulting variations of heat and particle losses were compared to JET results. The experimental differences between ion masses could not be reproduced. Together with the fact that the simulations' pedestal for an average ion mass of 2.5 and 3.0 was not matched to the experiment, this indicates that other effects, such as small-scale turbulences, must be included - for example, by adapting the simulations' transport coefficients - to explain the experimental differences.https://papers.cool/arxiv/2408.04608Deriving the Topological Properties of the Magnetic Field of Coronal Mass Ejections from In Situ Measurements: Techniques2024-08-09T00:00:00+00:00Nada Al-HaddadMitchell BergerCoronal mass ejections (CMEs) are magnetized plasma systems with highly complex magnetic topology and evolution. Methods developed to assess their magnetic configuration have primarily focused on reconstructing three-dimensional representations from one-dimensional time series measurements taken in situ using techniques based on the "highly twisted magnetic flux rope" approximations. However, the magnetic fields of CMEs is know to have more complicated geometries. Their structure can be quantified using measures of field line topology, which have been primarily used for solar physics research. In this work, we introduce a novel technique of directly quantifying the various form of magnetic helicity within a CME in the interplanetary space using synthetic in situ measurements. We use a relatively simple three-dimensional simulation of a CME initiated with a highly-twisted flux rope. We find that a significant portion of the magnetic helicity near 1~au is contained in writhe and mutual helicity rather than just in twist. We discuss the implications of this finding for fitting and reconstruction techniques.