Total: 1
Acoustic pressure nodes in acoustophoretic devices are crucial for applications in tissue engineering, cell analysis, and particle trapping. Typically, a single primary node forms at the half-wavelength resonance condition, while its shape and position are constrained by the dimensions of the channel. The generation of additional nodes, along with control over their positions and shapes, is highly desirable in biomedical applications and could significantly enhance particle manipulation capabilities. To explore this potential, we numerically demonstrate the formation of additional, complex-shaped, nodes alongside the primary one, by a circular scatterer within a rectangular cavity. We identify three distinct types: ring, protuberant, and crescent nodes, whose formation depends on the size of the scatterer, its placement in the middle of the channel, and its corresponding resonant frequency. The key mechanism behind this formation is the enhancement of internal reflections, increasing destructive interference to promote node generation. To achieve this, we employ three key concepts: using a low-aspect ratio channel, positioning a rigid circular scatterer in the middle of the channel, and modeling all surfaces as perfect reflectors. Furthermore, we analyze the impact of the scatterer on acoustic pressure and quality factor, which is defined as the ratio of stored acoustic energy to damped acoustic energy per cycle. We show that additional nodes emerge in the presence of a scatterer, but they come at the cost of reduced acoustic pressure and energy in the channel. In summary, this study provides information on generating complex nodes in a standing wave acoustic cavity at the fundamental frequency, which has numerous applications for particle manipulation in acoustofluidic devices.