Total: 1
PLATO is designed to detect Earth-sized exoplanets around solar-type stars and to measure their radii with accuracy better than $2\%$ via the transit method. Charge transfer inefficiency (CTI), a by-product of radiation damage to CCDs, can jeopardize this accuracy and therefore must be corrected. We assess and quantify the impact of CTI on transit-depth measurements and develop a correction strategy that restores CTI-biased depths within the accuracy budget. Using a calibration dataset generated with PLATOSim to simulate a realistic stellar field, we model the parallel overscan signal as a sum of exponential decays and use least-squares fitting to infer the number of trap species and initial estimates for the release times $\tau_{r,k}$. Smearing is modeled with an exponential-plus-constant function and removed on a column-wise basis. We model the spatial variation in trap density with a quadratic polynomial in radial distance from the focal-plane center. The polynomial coefficients $a_{p,k}$, the well-fill power index $\beta$, and the release times $\tau_{r,k}$ are adjusted via iterative application of the Extended pixel Edge Response (EPER) method combined with a CTI correction algorithm, yielding the final calibration model. In the worst-case scenario (8-year mission, high-CTI zone), CTI induces a bias of about $4\%$ in measured transit depth, reduced to a residual of $0.06\%$ after correction - well within PLATO's accuracy requirements. From the calibrated parameters, we derive a correction scheme that brings photometric measurements within PLATO's noise budget, ensuring that the mission's precision requirements are met.