2026-09-11 | | Total: 24
We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.
Very Long Baseline Interferometry (VLBI) is a technique in radio astronomy that vastly increases the diffraction limited angular resolution of radio observations by correlating simultaneous observations of radio telescopes separated by thousands of kilometers. Ground-based high-frequency VLBI is limited in baseline length by the diameter of the Earth and in sensitivity by molecular absorption of the Earth's atmosphere. One of the ways to improve VLBI is with balloon telescopes, which are much cheaper than space VLBI telescopes. In addition balloon-VLBI stations could also improve image quality due to increased uv-coverage. As a first step to achieving VLBI from a balloon-borne platform we present the Balloon-borne VLBI Experiment (BVEX). This is a novel, first-generation balloon-borne VLBI station observing at K-band (22 GHz) which launched as part of the Canadian Space Agency (CSA) STRATOS campaign from Timmins, Ontario, Canada in August 2025, with the aim to demonstrate VLBI from a balloon-borne platform by correlating with a large ground based telescope. We discuss the design of the 36 inch (91 cm) radio telescope and receiver with a 2 GHz bandwidth built from commercial-off-the-shelf (COTS) components as well as the telescope pointing system capable of interfacing with the CSA's CARMENCITA gondola. We also present a novel high precision position tracking system built from COTS components giving <1 mm precision on 1 s time scales which is required for achieving phase tracking at 22 GHz. We further show on-the-ground testing results from the 2025 Timmins campaign. The 2025 flight from Timmins was not successful due to a leak in the balloon preventing the payload from reaching its target altitude where accurate gondola pointing is possible. We therefore wrap up by presenting plans to upgrade the telescope for a potential next flight opportunity from Palmas, Tocantins, Brazil in 2027.
We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.
MICADO, one of the ELT first-light instruments, will rely on point-spread-function reconstruction (PSF-R) to meet scientific requirements, especially for SCAO observations of targets that lack bright reference stars nearby. PSF-R will be performed in post-processing using only AO telemetry, recorded simultaneously with the science data. For SCAO observations, both on- and off-axis PSFs will be delivered. We present the current status and results from an ESO TTR campaign begun in 2023, targeting a sparse three-star asterism under varying conditions with the ERIS instrument at VLT. Reconstructed PSFs reach ~10% accuracy in Strehl ratio and FWHM at separations up to half the size of the isoplanatic patch. The current results suggest the telemetry-driven approach can reproduce not only the core PSF structure but also the extended wings, which are essential for reliable photometry and morphological analysis of bright extended sources. The obtained results also corroborate the key role of wind as a limiting factor of the method, reducing the amount of recovered information on specific directions.
The MICADO instrument for the ESO ELT will provide Adaptive Optics (AO) diffraction-limited NIR imaging and spectroscopy. A critical component of MICADO is the Point Spread Function Reconstruction (PSF-R) Software, which is designed to perform a blind reconstruction of the PSF for all observations using AO telemetry data only, both with the Single Conjugate (SCAO) and Multi-Conjugate Adaptive Optics (MCAO) modes of MICADO. The SCAO PSF-R Pipeline is currently being completed, and validation with ERIS at VLT and SOUL+LUCI at LBT has demonstrated high accuracy, of percent-level on-axis and 5-20% off-axis. Initial scientific simulations confirm that the PSF-R software meets the necessary precision for high-quality analysis, securing its role for MICADO's first light and future ELT operations.
Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.
Photonic EMARCOT is an innovative project involving Spanish, German and Australian research institutes that aims to integrate multiple Optical Tube Assemblies (OTAs) using photonic lanterns. The "Pathfinder" prototype, featuring seven OTAs with a 1.1-meter effective aperture, will feed a spectrograph at the Calar Alto Observatory, with first light expected in 2026. We report the fabrication and experimental evaluation of a custom 7x1 multi-mode photonic lantern (MMPL) developed for this framework, featuring seven 25 um core multi-mode inputs merging into a single 50 um core multi-mode output optimized for the visible wavelength range (400-700 nm). Optical characterization centered at 600 nm reveals exceptional channel-to-channel uniformity, with statistical variations close to zero across both bare-fiber and connectorized MMPL configurations. However, the total baseline throughput of this initial device was limited to below 4%. From the refractive index studies, this low throughput is attributed to severe refractive index mismatch between the internal fiber cladding geometry and the structural capillary, which suppresses total internal reflection during the tapering transition. This work establishes an important diagnostic baseline that highlights the necessary fabrication tolerances needed to improve future high-throughput manufacturing processes for precision radial-velocity astronomy.
We implement a second-order accurate constrained transport (CT) magnetohydrodynamics (MHD) module with first-order flux correction in the open-source, adaptive mesh refinement (AMR), GPU-accelerated code quokka, supporting both ideal and resistive (constant Ohmic) regimes. For computing and averaging the electromotive forces (EMFs) at cell edges, the basis of any CT-MHD method, we experiment with a wide range of recent, state-of-the-art schemes, together with different reconstruction schemes. Alongside these, we develop a new EMF compute scheme that requires fewer reconstruction steps than existing approaches. We evaluate these scheme combinations on the basis of accuracy, stability, and GPU throughput, and demonstrate that our new scheme achieves accuracy comparable to the best-in-class existing methods, together with greater stability in reconnection-dominated flows and roughly 25--60% higher GPU throughput. Using this scheme, quokka achieves excellent results across a wide range of MHD flow regimes, reaching >50 million cell updates per GPU per second, with >70% parallel efficiency out to >500 GPUs. Finally, we confirm that our CT implementation preserves divergence-free magnetic fields (to machine precision) under AMR.
Upper Sideband Syntonization (USBS) is a two-way frequency-transfer concept proposed by the European Space Agency for distributed space radio interferometric systems. Previous investigations validated the concept primarily through frequency-stability and phase-transfer measurements. This work demonstrates the first end-to-end instrument-level validation of the USBS concept through coherent W-band cross-correlation measurements and image reconstruction. A P=2 USBS breadboard was integrated with a W-band radio interferometer developed for this test. The synchronized local oscillators (LOs) were evaluated through long-term cross-correlation measurements and coherent imaging of a point-like noise source. The results were compared with those obtained using a conventional common LO as well as two independent free-running LOs. The USBS-derived LOs maintained coherence over 500 s of cumulative effective integration time acquired over approximately five days of elapsed time and preserved inter-session phase stability over measurements spanning 40 days. The reconstructed image is nearly indistinguishable from that obtained with a common LO, whereas independent free-running LOs lead to severe coherence degradation, image distortion, and approximately 38 dB loss of peak response. The results demonstrate that USBS preserves the interferometric coherence required for W-band imaging and present the first end-to-end instrument-level validation of the USBS syntonization concept for future distributed space radio interferometric missions
This work presents commissioning of the Hat Creek Outrigger (HCO), a dual-polarization 256-element radio interferometer that is part of the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Outrigger project. Driven by a complex radio-frequency interference (RFI) environment that consistently contaminates $\sim40\%$ of HCO's usable bandwidth, we implement an improved calibration scheme using Gaussian Process Regression to recover complex gain solutions over RFI contaminated channels. To validate our method, we test the performance of the array using known transients and continuum sources over relevant timescales used for fast-transient research ($\lesssim$ seconds). We find that our updated calibration scheme results in a $\sim1.69\times~\mathrm{to}~1.87\times$ improvement in the array's point-source sensitivity, while simultaneously maintaining noise properties consistent with thermal statistics. As a result, we find that the array performs consistently within theoretical expectations across $\gtrsim80\%$ of HCO's bandpass. We further observe an improvement in the interferometric performance after applying recently developed spatial filtering techniques for RFI mitigation, which rely on accurate calibration solutions for effective removal of unwanted interference. We conclude that our approach provides a valid framework for improving calibration solutions over RFI contaminated channels for large-$N$ interferometric arrays more broadly. Our work motivates future development of more sophisticated techniques to recover astrophysical information in RFI-contaminated channels, departing from the historical practice of discarding them outright.
We present the data reduction and transient detection pipeline for the Wide-field Infrared Transient Explorer (WINTER) surveyor and report its on-sky performance. The WINTER camera utilizes cost-effective InGaAs sensors as alternatives to traditional IR sensors, and is mounted on a dedicated 1-m robotic telescope at Palomar Observatory. The WINTER camera has six detectors producing a combined field-of-view of 1.2 sq. deg. equipped with y, J, and shortened-H bands. WINTER saw first light in June 2023 and has been operating robotically since. The WINTER data processing pipeline ($\texttt{winterdrp}$) has been implemented within the broader framework $\texttt{mirar}$: a modular, open-source $\texttt{python}$ package developed for realtime processing of images from time-domain surveys. $\texttt{winterdrp}$ performs end-to-end data processing implementing data reduction and image subtraction to go from raw dithered WINTER images to transient alerts in the $\texttt{avro}$ format, which are then sent to $\texttt{SkyPortal}$ for vetting and follow-up. During a year of observations in 2024, WINTER achieved J-band median 5-$σ$ depths ranging from $18.1-18.8$ mag (AB) on its six detectors in 960 second integrations as part of its survey, with an astrometric accuracy of $\approx0.2$ arcsec (a fifth of a pixel) and a detector-performance limited photometric accuracy ranging from $\approx0.09-0.18$ mag for its six detectors. We present early science results from WINTER, which include the identification of a stellar merger in M31, dust-enshrouded outbursting young stellar objects and classical novae in the Galactic plane, NIR followup of known supernovae, and multi-messenger follow-up of neutrinos, gravitational waves, fast X-ray transients and gamma-ray bursts.
Language models leave a distinctive vocabulary in the prose they help write, and we measure how much of the astronomy literature now carries it. From the full text of 207,111 astro-ph papers spanning 2015 to mid-2026, we count those words in each paper and model the counts, in proportion to paper length, as a mixture of assisted and unassisted writing in a hierarchical Bayesian model. Papers from before 2020 calibrate the unassisted rate, and the 392 papers that disclose model use calibrate the assisted one. Our answer depends on how often these words would appear today if nobody used a model, a rate that must be modeled rather than observed, so we extend it past 2020 under three assumptions and report all three. For 2025 that gives $54^{+8}_{-8}\,(\mathrm{stat},\,95\%)\,^{+26}_{-0}\,(\mathrm{sys,\ background})$% of papers, the second error being the spread across the three. The estimate stays at or above 36% when we vary that choice, the calibration, and the requirement that adoption only rises. A word list built from the astro-ph corpus, keeping only words that rose across every subfield, leaves 2025 in the same range. Assisted writing is also getting harder to see, since authors adapt to the words that reveal it and the marker excess more than halves between 2023 and 2026. Our model allows for that fading, so it can separate a fainter trace from reduced use. More than half of recent astro-ph papers therefore carry a language-model trace, while only 0.81% of 2025 papers disclose it, one declaration for every $\sim$66 papers with a trace.
A new generation of space-based observatories can transform small-body science from the local Earth-Moon environment to the Solar System's dynamical frontier, where planetary control gives way to Galactic tides and stellar encounters. Mapping this frontier would reveal how planetesimals were scattered during giant-planet formation, how many primordial bodies survived in distant reservoirs, and whether large objects remain undiscovered in the inner Oort Cloud. At the same time, meter- to decameter-scale natural objects traversing the Earth-Moon system are frequent but poorly characterized. As human and robotic activity expands, their operational relevance depends not simply on abundance but on object size, encounter geometry, exposed infrastructure, warning time, and available response. Lunar impacts and impact-generated ejecta provide one class of events, while fading objects with unresolved Earth or lunar impact probabilities provide another. Here, we explore a two-layer small-body program combining a 4.0 m-diameter Nautilus Quattro Imaging (NQI) unit with an illustrative distributed cislunar layer of ~50 cm-class wide-field optical telescopes. The cislunar layer would characterize the nearby natural-object population, support rapid classification and selective custody of high-interest objects, and monitor lunar impacts and ejecta; the NQI deep-search layer would provide precise astrometry and synthetic tracking for faint-object recovery and distant-Solar-System surveys. Together, the two layers would constrain the small-impactor population, resolve fading planetary-defense targets, and survey the distant Solar System to Vmag ~30, enabling tests of the Kuiper-Belt-to-Oort-Cloud transition while advancing Earth-Moon space resilience.
We present new JWST/NIRSpec IFU high contrast spectroscopic observations of the brown dwarf companion GJ 758 B. Extensive radial velocity monitoring of the primary has enabled high-precision measurements of the companion mass through characterization of their joint orbital dynamics. The combination of prior space- and ground-based photometry and spectroscopic observations in concert with a spectral model-independent mass makes this target an ideal benchmark for calibrating evolutionary models with known mass-age-luminosity degeneracies. A template-matching analysis on the NIRSpec/IFU data (F290LP,G395H; $λ\in$ [2.87-5.27] $μ$m) detects the companion at the expected orbital position with incredible significance (265.2$σ$). Comprehensive spectral analysis including published datasets over a variety of different spectral model families reveal that an inference using a uniform radius prior is plagued by inaccurate posteriors. The atmospheric model degeneracy between metallicity, gravity, and clouds pull the inferred mass/gravity/radius to an unphysical portion of parameter space for all model families tested. A constrained inference with a gaussian prior on the mass can mitigate this issue but models without clouds still struggle to accurately reproduce the K-band photometry and result in mass inferences which are inconsistent with the dynamics. We explore modifying the spectral models with custom post-processed clouds and molecular abundance perturbations of ammonia and hydrogen sulfide. We find the best-fitting model includes clouds with no patchiness (hole fraction f$_\mathrm{hole}$ = 0), a small fractional depletion in ammonia and moderate enhancement in hydrogen sulfide.
We present the first spectral analysis from the JWST Cycle 3 GO Program #6362, the Dyn-Atmo Survey of dynamical-atmospheric benchmarks, characterizing the atmospheres of directly-imaged companions with dynamical masses and measured orbits. This program has obtained moderate-resolution spectra (R$\sim$2700, 3-5$μ$m) using the NIRSpec/G395H IFU. We observe the T4-dwarf companion, HD 13724 B, companion to a G-type star at a projected angular separation of 0''2. Updated orbital monitoring constrains the mass to $38.3\pm0.6~M_{\rm{Jup}}$, which we use as a Gaussian prior when inferring the atmospheric state. We fit the continuum-subtracted spectrum using the BT-SETTL, Sonora Diamondback, Sonora Flame Skimmer, and NEWERA-PHOENIX self-consistent model grids, together with petitRADTRANS atmospheric retrievals. We adopt bulk parameter values of $T_\mathrm{eff}$=$1150\pm$195 K, $\log g$=5.1$\pm0.3$ dex, [M/H]=0.4$\pm$0.4, $\log_{10}(K_{zz})$=6.33$_{-2.22}^{+2.59}$, and C/O=$0.50\pm0.13$ using a bayesian average across model grids. We find degeneracies in the models between surface gravity, metallicity, and $K_{zz}$ for Sonora Diamondback and Flame Skimmer. The Flame Skimmer and NEWERA-PHOENIX vertical mixing strengths are incompatible, with Flame Skimmer finding a systematically lower value. The retrievals favor an atmosphere in chemical equilibrium, with enhanced metallicity and a solar C/O ratio, but with no detection of disequilibrium chemistry, and no detection of trace gases other than CH$_4$, CO$_{2}$, $^{12}$CO and H$_{2}$O. Ultimately, we identify critical challenges in forward modeling continuum-subtracted G395H spectra in the low signal-to-noise regime. We find that including independent dynamical mass measurements better constrains atmospheric parameters, but degeneracies between self-consistent model parameters limit accurate atmospheric parameter inferences.
The aperture mass filter is a widely used tool in weak lensing studies. While previous surveys have typically relied on the flat-sky approximation, forthcoming Stage IV surveys such as Euclid will cover sufficiently large areas to require the construction of curved-sky aperture mass maps. In this paper, we extend the shear-based aperture mass formalism to the sphere and introduce a software package for a fast and precise computation of spherical aperture mass maps from the shear field, defined directly on the celestial sphere. Unlike existing approaches, our method does not rely on planar projections and does not require the reconstruction of convergence maps. The software provides four different implementations, all of which are independent of the choice of aperture mass filter function. Starting from the brute-force approach, whose computational cost renders it impractical for future surveys covering more than 10,000 deg2, we investigate alternative galaxy-grouping strategies to improve computational efficiency. We demonstrate speed-up factors of up to 40 at a resolution of NSIDE = 4096 while achieving significantly higher precision than existing state-of-the-art methods. In particular, we show that the spherical shear-based implementations using a pixel-based approach outperforms the existing methods in terms of both precision and computational time. Finally, we show that, for weak-lensing cluster detection, the cluster sample produced using the spherical shear-based aperture mass method consistently outperforms those obtained using projected shear-based approaches in the purity-completeness plane, while simplifying the resulting selection function. Our spherical mass aperture software, called SMART, is made available on GitHub.
SOLAR-C is an international solar-observing satellite mission led by Japan Aerospace Exploration Agency (JAXA). It aims to elucidate mass and energy transport in solar atmospheres through extreme ultraviolet (EUV) spectroscopy. The mission carries the EUV High-throughput Spectroscopic Telescope (EUVST) and the Solar Spectral Irradiance Monitor (SoSpIM), enabling comprehensive observations across a wide temperature range (10^4 K to 10^7 K) with minimum temperature gaps and high spatial and temporal resolution. To achieve its science objectives regarding atmospheric heating and solar flare eruptions, SOLAR-C implements a flexible and responsive operational procedure and a data processing system, while building on the heritage of the Hinode and IRIS satellites. The Chief Observer creates observation timelines that include core observation plans and approved proposed plans while taking into account the solar activity levels. A SpaceWire communication architecture is employed onboard the spacecraft, and a method is implemented in which the mission instrument temporarily acts as the network master during data transfer to support the high data rate requirements. Telemetry is downlinked at ground stations worldwide and gathered at the Institute of Space and Astronautical Science, JAXA. The EUVST data are calibrated at the SOLAR-C Science Center at Nagoya University, while the SoSpIM data are calibrated at the Processing and Archiving Facility before being integrated into the science data products. The data will be made publicly available immediately. The integrated operational scheme for this mission is expected to advance our understanding of solar atmospheric heating and flare processes.
Efficient and accurate numerical integration methods are fundamental to studying long-term solar system dynamics, where numerical errors can accumulate over billions of orbital periods. In this work, we investigate the performance of our modification of Lobbie, a Lobatto collocation integrator for long-term simulations of the Solar System. We compare Lobbie against the widely used WHFast symplectic integrator and the high-order adaptive collocation integrator IAS15 implementations in the Rebound package. The performance of the integrator is evaluated using five benchmark problems: a circular two-body orbit integrated over 100 Myrs, two-body orbits with eccentricities up to 1-10^{-6} to test the adaptive step size control during repeated close encounters, the full eight-planet Solar System integrated over 100 Myrs, the four giant planets integrated over 10 Gyrs, and the eight-planet Solar System together with 50 asteroids on Aten-like orbits integrated over 1Myr to test the integrator's consistency in a chaotic, close-encounter-rich environment. Across all tests, Lobbie demonstrates excellent long-term stability and competitive computational performance. For full Solar System integrations, Lobbie achieves relative energy conservation at the level of 10^{-14} while outperforming IAS15 in computational efficiency and approaching the speed of WHFast at comparable accuracy. In the Solar System plus asteroids test, Lobbie also keeps different realizations of Jupiter's orbit consistent with each other to within about 1.5 km after 1 Myr of integration, two orders of magnitude better than IAS15, being twice faster. Our results demonstrate that Lobbie provides a powerful universal alternative to traditional symplectic mappings or Gauss-Radau collocation methods for long-term dynamical simulations in celestial mechanics.
We present ultra-precise fundamental parameters for the detached eclipsing binary UX Men based on 31 TESS sectors ($\sim$882 d) and radial velocities from HARPS, FEROS, CORALIE, and UCLES. The light curves were detrended for spot-induced variability and modelled independently with JKTEBOP and ALLESFITTER, while radial velocities were extracted via TODCOR and fitted with a Keplerian orbit. Spectral disentangling yielded individual component spectra analysed with iSpec to determine $T_{\rm eff}$ and $\mathrm{[M/H]}$. Multi-band photometry was used to determine the fluxes, flux ratios and ultimately to measure photometric $T_{\rm eff}$. We obtain the masses $M_{\rm A}$ = $1.2300 \pm{0.0012}$ M$_{\odot}$, $M_{\rm B}$ = $1.1946\pm{0.0012}$ M$_{\odot}$ and radii $R_{\rm A}$ = $1.3605\pm{0.0031}$ R$_{\odot}$, $R_{\rm B}$ = $1.2801\pm{0.0069}$ R$_{\odot}$ with sub-percent precision. Uncertainties were found to be dominated by systematic effects coming from (weak) stellar activity. $T_{\rm eff,A}$ = $6302\pm{77}$, $T_{\rm eff,B}$ = $6292\pm65$ \& Metallicity estimates are $[M/H]_{\rm A} = 0.02\pm{0.13}$ dex and $[M/H]_{\rm B}= 0.07\pm{0.10}$ dex. Isochrone fitting yields a consistent age of $τ$ = $2.75\pm{0.13}$ Gyr. The system exhibits a $\sim$ 673-day periodicity in eclipse-timing variations, likely due to stellar activity, with no evidence for a third body. Results are independent of the modelling code used, but without proper treatment of activity-induced systematics the uncertainties would be underestimated. UX Men is a high-precision benchmark binary providing stringent tests of stellar models and a robust calibration source for PLATO. Expanding the sample of well-characterised detached eclipsing binaries will strengthen the empirical foundations for stellar physics and the calibration of future photometric missions
Solar flares are intense bursts of electromagnetic radiation that occur when stored magnetic energy in the Sun's atmosphere is suddenly released. They are categorized into five classes -- from least to most powerful: A, B, C, M, and X -- with each successive class representing a ten-fold increase in energy output. The electromagnetic radiation emitted by the stronger classes (C, M, and X) is capable of causing significant disruptions to communication systems, satellites, and power grids on Earth. Accurate prediction of solar flares is crucial for mitigating their adverse effects and ensuring the functionality of critical infrastructure. This research introduces a novel model named ResNet-Transformer, which combines a convolutional neural network (CNN), ResNet50, with a standard Transformer architecture. The hybrid model effectively processes both spatial and time-series data derived from solar images to predict the occurrence, class (C, M, and X), and probability of solar flares within 24-hour, 36-hour, and 72-hour windows. This hybrid deep learning model represents the first of its kind in the domain of image-based, multiclass solar flare prediction. We evaluated the model's performance using a comprehensive set of metrics, including weighted precision, recall, and F1 score, together with balanced accuracy, the Matthews correlation coefficient (MCC), Cohen's kappa, and the area under the receiver operating characteristic curve (ROC-AUC). Results show that ResNet-Transformer surpasses traditional machine learning methods, such as support vector machines (SVMs) and standalone CNN models, across all evaluated metrics. This study highlights the potential of integrating convolutional neural networks with Transformers to enhance predictive capabilities in solar physics, paving the way for more reliable and timely solar flare forecasting.
The ability to use single mode (SM) fibers for beam transport in optical interferometry offers practical advantages over conventional long vacuum pipes. One challenge facing fiber transport is maintaining constant differential path length in an environment where environmental thermal variations can lead to cm-level variations from day to night. We have fabricated three composite cables of length 470 m, each containing 4 copper wires and 3 SM fibers that operate at the astronomical H band (1500-1800 nm). Multiple fibers allow us to test performance of a circular core fiber (SMF28), a panda-style polarization-maintaining (PM) fiber, and a lastly a specialty dispersion-compensated PM fiber. We will present experimental results using precision electrical resistance measurements of the of a composite cable beam transport system. We find that the application of 1200 W over a 470 m cable causes the optical path difference in air to change by 75 mm (+/- 2 mm) and the resistance to change from 5.36 to 5.50 Ω. Additionally, we show control of the dispersion of 470 m of fiber in a single polarization using white light interference fringes (λc=1575 nm, Δλ=75 nm) using our method.
We describe Teglon, an open-source database and analysis pipeline engineered to optimize the search for electromagnetic (EM) counterparts to gravitational wave (GW) sources. Teglon constructs a 3D galaxy completeness metric from an input galaxy catalog and convolves it with the 3D localization volume of a GW event, producing an updated posterior map informed by known galaxy distributions. Using Teglon, users can ingest arbitrary instrument footprints --- or download them directly from the Treasure Map --- to generate dynamic observation plans that seamlessly interpolate between targeted galaxy pointing and region tiling. By focusing efforts on high-probability volumes, Teglon significantly reduces the predicted search area to find EM counterparts and increases observational efficiency, especially for small field-of-view (<= 1 deg^2) instruments like the Nancy Grace Roman Space Telescope. Furthermore, Teglon integrates with Redback to calculate pixel-level model detection efficiencies, enabling custom, event-specific observing strategies or retrospective detection efficiencies on an arbitrary grid of EM transient models. Teglon also supports custom science cases, such as prioritizing Active Galactic Nuclei searches for EM counterparts to binary black hole mergers. Having supported Gravity Collective and related programs from the LIGO-Virgo-KAGRA third observing run (O3) through O4, Teglon is being continuously developed to support O5 and beyond. We document the public repository lineage and packaging, and provide Version 2.0 as an open-source tool for the community.
Ultra-hot Jupiters (UHJs) are the most extreme class of close-in gas giants. We combine 13 transit observations of KELT-9b from six high-resolution spectrographs spanning 316-960 nm to conduct a census of atomic and ionised species in its atmosphere using cross-correlation. We introduce an agnostic strategy to mitigate velocity-axis correlation bias in parameter uncertainties. A forward model of the cross-correlation function (CCF) and a Monte Carlo bootstrap of flux uncertainties measure the CCF-derived velocity profiles of individual species and assess their time dependence. The stellar reference frame is determined, yielding Vsys = -17.99 +/- 0.04 km s^-1 and v sin i = 110.54 +/- 0.05 km s^-1. All previously reported species are recovered except Tb II; the combined analysis detects 29 species, including C I, Si I, K I, V II, Co I, Zr II, La II, Pr II, and Nd II. All 29 recovered species exceed the conventional 5 sigma threshold in the bootstrap Mahalanobis significance test. The collective Doppler shifts show a blueshift of Delta Voffset = -8.02 +/- 0.17 km s^-1 relative to the stellar rest frame, indicating a net day-to-night wind, with no explicit time dependence when all species are homogenised. These results provide a catalogue of detections and retrieved Doppler parameters for a companion study of KELT-9b.
Microwave Kinetic Inductance Detectors are superconducting resonators capable of single-photon counting with energy resolving capability at visible and near-infrared wavelengths. Their zero read noise, extremely low dark counts, and compatibility with frequency-division multiplexing make them well suited for large imaging arrays. The detector yield of these arrays is often limited by the fabrication-induced frequency scatter leading to resonator collisions. We find that the tight packing of the pixels can add significant frequency scatter as well. We developed a post-fabrication correction method that is suitable for tightly packed arrays with a pixel pitch of $150\ \mathrm{μm}$. We demonstrate this method on a 1024-pixel array multiplexed on a single octave of readout bandwidth and show a reduction in frequency scatter from $1.1\times 10^{-2}$ to $3.5\times 10^{-4}$ and an increase in yield from $76\%$ to $94\%$.