Total: 1
The compressive and post-buckling behavior of Ti2C and Ti2CO2 MXene nanosheets is studied using large-scale reactive molecular dynamics simulations. Nanosheets are subjected to uniaxial, biaxial, and shear loads to investigate their buckling modes, atomic-level deformation mechanisms, and failure characteristics. The results indicate that classical continuum mechanics significantly overestimates the buckling strains. Nanosheets exhibit higher resistance to buckling along the armchair direction than along the zigzag direction. Although atomic-scale defects reduce the buckling stress, they influence deformation only locally and do not alter the global buckling mode shapes. Lateral confinement pressure, such as that caused by polymerization-induced shrinkage in MXene-polymer composites, substantially increases the buckling stress. Oxygen surface termination increases the buckling stress from approximately 1 GPa to 3.5 GPa and reduces directional anisotropy in the elastic response. Under large compressive strains, Ti2CO2 nanosheets fracture, whereas Ti2C nanosheets retain structural integrity at strains exceeding 0.35. Atomistic analysis reveals opposite stress states in the top and bottom Ti layers due to curvature-induced strain gradients. Under biaxial compression, the nanosheet buckles in a dome-like shape, whereas shear loads produce elliptical deflection modes. The presented findings stimulate future studies on MXene morphological transformations, such as the development of nanotube, nanoscroll, and folded architectures.