Total: 1
Porous and perforated leading edges reduce turbulence-interaction noise, but predictions of the reduction have relied on material impedances adjusted to the acoustic data. This paper removes that adjustment. The finite-chord scattering problem is solved in compressible subsonic flow for an arbitrary chordwise admittance, with the shed wake, the Kutta condition and permeability-dependent edge singularities, and closed to the far field with the finite span and the array aperture represented. The admittance of a perforated insert is derived from the Rayleigh conductivity of one aperture with three computed corrections: plate thickness, interaction between neighbouring apertures, and Howe's grazing-flow blockage evaluated at the aperture-averaged velocity of the boundary layer. A bulk porous insert is represented by its measured permeability and pore-fluid inertia. For three perforates at four flow conditions the prediction agrees with measurements to 2.5 dB rms over 84 comparisons, against 4.4 dB with the unscaled impedance used previously. Although the Mach number is 0.05, the chord is acoustically non-compact, and an incompressible solution rises where the measurement falls. Two of three bulk porous inserts are predicted to within 1.7 dB rms where interaction noise dominates. Narrow, equally spaced peaks measured on perforated plates are reproduced by none of the admittances tested; their spacing implies a source convecting at 0.62 of the free-stream speed, absent from a frozen-gust model. A parameter study shows that the perforate geometry acts almost entirely through one low-frequency admittance group, in which the hole radius cancels for holes buried in the laminar boundary layer.