Total: 1
The Jiangmen Underground Neutrino Observatory (JUNO) experiment is a reactor antineutrino detector employing 20 kton of ultra-pure liquid scintillator to determine the neutrino mass ordering and to precisely measure oscillation parameters. The total singles background rate from radioactivity is required to be below 10 Hz in the energy range of 0.7-12 MeV within the fiducial volume for reactor neutrino analysis. The calibration system is designed to characterize the detector energy and position responses, while several of its components are located close to the target and may contribute to the background budget. Therefore, extensive material screening and selection are required to construct a low-background calibration system and to ensure that its contribution remains within the design requirements. In this work, a comprehensive study of the radioactive background induced by the calibration system is presented, including material radioactivity measurements using high-purity germanium detectors and neutron activation analysis techniques, detailed Monte Carlo simulations to evaluate the background, and comparisons with in-situ detector data to validate the predictions. In this data analysis, dedicated spatial selection methods are developed to isolate calibration-related contributions and to suppress the liquid scintillator background. The total radioactivity contribution from the calibration system is estimated to be less than 76 mHz, which satisfies the requirement of 200 mHz (2% of the total background budget). The results from in-situ data are found to be consistent with the expectations based on material assay and simulation within uncertainties. These results demonstrate that the calibration-induced background is well understood, in agreement between data and simulation, and negligible for reactor antineutrino measurements in JUNO.