| Total: 1000
Mexico City, the largest city in Mexico, is also one of the largest cities in the world. It has over 9 million inhabitants and concentrates the vast majority of government and business centers. In this work we describe algorithms that use anonymized location data from mobile devices to construct Mexico City's contact and mobility networks aiming to help the analysis of the city's complexity by understanding movement and physical interaction patterns between its inhabitants. We show the effectiveness and usefulness of our approach by building networks with data collected in February 2020 and performing a general descriptive analysis on them. We found that contact networks in Mexico City are very sparse, characterized by a largest connected component, and with a heavy-tailed degree distribution. On the other hand, we observed that paths conformed by the highest-degrree nodes of mobility networks resemble Mexico City's street network; moreover, we found interesting qualitative differences in the degree distribution of these networks between weekends and weekdays. We present these results along with the release of contact and mobility networks.
This paper presents a model for COVID19 in Mexico City. The data analyzed were considered from the appearance of the first case in Mexico until July 2021. In this first approximation the states considered were Susceptible, Infected, Hospitalized, Intensive Care Unit, Intubated, and Dead. As a consequence of the lack of coronavirus testing, the number of infected and dead people is underestimated, although the results obtained give a good approximation to the evolution of the pandemic in Mexico City. The model is based on a discrete-time Markov chain considering data provided by the Mexican government, the main objective is to estimate the transient probabilities from one state to another for the Mexico City case.
Ground-level ozone and particulate matter pollutants are associated with a variety of health issues and increased mortality. For this reason, Mexican environmental agencies regulate pollutant levels. In addition, Mexico City defines pollution emergencies using thresholds that rely on regional maxima for ozone and particulate matter with diameter less than 10 micrometers (PM10). To predict local pollution emergencies and to assess compliance to Mexican ambient air quality standards, we analyze hourly ozone and PM10 measurements from 24 stations across Mexico City from 2017 using a bivariate spatiotemporal model. Using this model, we predict future pollutant levels using current weather conditions and recent pollutant concentrations. Using hourly pollutant projections, we predict regional maxima needed to estimate the probability of future pollution emergencies. We discuss how predicted compliance to legislated pollution limits varies across regions within Mexico City in 2017. We find that predicted probability of pollution emergencies is limited to a few time periods. In contrast, we show that predicted exceedance of Mexican ambient air quality standards is a common, nearly daily occurrence.
In Mexico, 25 per cent of the urban population now lives in informal settlements with varying degree of depravity. Although some informal neighbourhoods have contributed to the upward mobility of the inhabitants, the majority still lack basic services. Mexico City and the conurbation around it, form a mega city of 21 million people that has been growing in a manner qualified as "highly unproductive, (that) deepens inequality, raises pollution levels" and contains the largest slum in the world, Neza-Chalco-Izta. Urban reforms are now aiming to better the conditions in these slums and therefore it is very important to have reliable measurement tools to assess the changes that are undergoing. In this paper, we use exploratory factor analysis to define an index of depravity in Mexico City, namely the Slum Severity Index (SSI), based on the UN-HABITATs definition of a slum. We apply this novel approach to the Census survey of Mexico and measure the housing deprivation levels types from 1990 - 2010. The analysis highlights high variability in housing conditions within Mexico City. We find that the SSI decreased significantly between 1990 - 2000 due to several policy reforms, but increased between 2000 - 2010. We also show correlations of the SSI with other social factors such as education, health and migration. We present a validation of the SSI using Grey Level Co-occurrence Matrix (GLCM) features extracted from Very-High Resolution (VHR) remote-sensed satellite images. Finally, we show that the SSI can present a cardinally meaningful assessment of the extent of the difference in depravity as compared to a similar index defined by CONEVAL, a government institution that studies poverty in Mexico.
This article presents a detailed analysis of atmospheric pollutants in Puebla City, Mexico, based on data collected between 2016 and 2024. The research focuses on the daily variation of six major pollutants: ozone (O3), particles smaller than 10 microns (PM10), particles smaller than 2.5 microns (PM2.5), sulfur dioxide (SO2), and nitrogen dioxide (NO2). The Mann-Kendall test, Innovate Trend, and Wavelet Transform Analysis were applied to identify significant trends and seasonal patterns. The results indicate an increase in the levels of O3, SO2, and NO2, while the levels of PM10, and PM2.5 have shown a decrease. The study also employs the Prophet Forecasting Model to predict PM2.5 and PM10 concentrations for the year 2022, demonstrating that the model's accuracy increases as the analysis extends over longer periods.
We look for a diurnal anisotropy in the cosmic ray flow, using the Mexico-City Neutron Monitor (NM) detector, due to the Earth's orbital motion and predicted by Compton-Getting (C-G) in 1935, as a first-order relativistic effect. The Mexico-City NM's geographic latitude is not very high (19.33∘N), and it has a high cutoff geomagnetic rigidity (8.2 GV) and mountain altitude (2274 m asl) favoring the observation of the C-G effect. Furthermore, during the solar cycle minima, the galactic cosmic ray flux is maxima, and the solar magnetic field gets weakened, with a dipolar pattern. Its influence on cosmic rays reaching Earth is the smallest. Analysis of the combined counting rate during two solar minima, 2008 and 2019, from Mexico-city NM's data yields the C-G effect with an amplitude variation of (0.043± 0.019)\%, and phase of (6.15± 1.71) LT. The expected amplitude variation is 0.044\%, and the phase of 6.00 LT.
Tropospheric ozone is an atmospheric pollutant that negatively impacts human health and the environment. Precise estimation of ozone levels is essential for preventive measures and mitigating its effects. This work compares the accuracy of multiple regression models in forecasting ozone levels in Mexico City, first without adding temporal features and interactions, and then with these features included. Our findings show that incorporating temporal features and interactions improves the accuracy of the models.
During the COVID-19 pandemic, the slope of the epidemic curve in Mexico City has been quite unstable. We have predicted that in the case that a fraction of the population above a certain threshold returns to the public space, the negative tendency of the epidemic curve will revert. Such predictions were based on modeling the reactivation of economic activity after lockdown by means of an epidemiological model on a contact network of Mexico City derived from mobile device co-localization. We evaluated the epidemic dynamics considering the tally of active and recovered cases documented in the mexican government's open database. Scenarios were modeled in which different percentages of the population are reintegrated to the public space by scanning values ranging from 5% up to 50%. Null models were built by using data from the Jornada Nacional de Sana Distancia (the Mexican model of elective lockdown) in which there was a mobility reduction of 75% and no mandatory mobility restrictions. We found that a new peak of cases in the epidemic curve was very likely for scenarios in which more than 5% of the population rejoined the public space; The return of more than 50% of the population synchronously will unleash a peak of a magnitude similar to the one that was predicted with no mitigation strategies. By evaluating the tendencies of the epidemic dynamics, the number of new cases registered, new cases hospitalized, and new deaths, we consider that under this scenario, reactivation following only elective measures may not be optimal. Given the need to reactivate economic activities, we suggest to consider alternative measures that allow to diminish the contacts among people returning to the public space. We evaluated that by "encapsulating" reactivated workers may allow a reactivation of a larger fraction of the population without compromising the desired tendency in the epidemic curve.
Mexico City tracks ground-level ozone levels to assess compliance with national ambient air quality standards and to prevent environmental health emergencies. Ozone levels show distinct daily patterns, within the city, and over the course of the year. To model these data, we use covariance models over space, circular time, and linear time. We review existing models and develop new classes of nonseparable covariance models of this type, models appropriate for quasi-periodic data collected at many locations. With these covariance models, we use nearest-neighbor Gaussian processes to predict hourly ozone levels at unobserved locations in April and May, the peak ozone season, to infer compliance to Mexican air quality standards and to estimate respiratory health risk associated with ozone. Predicted compliance with air quality standards and estimated respiratory health risk vary greatly over space and time. In some regions, we predict exceedance of national standards for more than a third of the hours in April and May. On many days, we predict that nearly all of Mexico City exceeds nationally legislated ozone thresholds at least once. In peak regions, we estimate respiratory risk for ozone to be 55% higher on average than the annual average risk and as much at 170% higher on some days.
During outbreaks of emerging infectious diseases, internationally connected cities often experience large and early outbreaks, while rural regions follow after some delay. This hierarchical structure of disease spread is influenced primarily by the multiscale structure of human mobility. However, during the COVID-19 epidemic, public health responses typically did not take into consideration the explicit spatial structure of human mobility when designing non-pharmaceutical interventions (NPIs). NPIs were applied primarily at national or regional scales. Here we use weekly anonymized and aggregated human mobility data and spatially highly resolved data on COVID-19 cases, deaths and hospitalizations at the municipality level in Mexico to investigate how behavioural changes in response to the pandemic have altered the spatial scales of transmission and interventions during its first wave (March - June 2020). We find that the epidemic dynamics in Mexico were initially driven by SARS-CoV-2 exports from Mexico State and Mexico City, where early outbreaks occurred. The mobility network shifted after the implementation of interventions in late March 2020, and the mobility network communities became more disjointed while epidemics in these communities became increasingly synchronised. Our results provide actionable and dynamic insights into how to use network science and epidemiological modelling to inform the spatial scale at which interventions are most impactful in mitigating the spread of COVID-19 and infectious diseases in general.
The 1985 M8.1 Mexico City earthquake marked a turning point in Mexican earthquake engineering, underscoring the influence of soft soils, subsidence, and site effects on seismic performance in the Valley of Mexico. In the four decades since, both research and engineering practice have evolved significantly, shaped by subsequent events such as the 2017 M7.1 Puebla-Morelos earthquake. Integrating observations made during the Learning from Earthquakes Travel Study program and desk study findings, this paper summarizes the progression of geotechnical knowledge and practice in Mexico City, through the lessons of 1985 and 2017, through the lens of site effects, soil zonation, subsidence and emerging directions and future trends.
Early detection of dental disease is crucial to prevent adverse outcomes. Today, dental X-rays are currently the most accurate gold standard for dental disease detection. Unfortunately, regular X-ray exam is still a privilege for billions of people around the world. In this paper, we ask: "Can we develop a low-cost sensing system that enables dental self-examination in the comfort of one's home?" This paper presents ToMoBrush, a dental health sensing system that explores using off-the-shelf sonic toothbrushes for dental condition detection. Our solution leverages the fact that a sonic toothbrush produces rich acoustic signals when in contact with teeth, which contain important information about each tooth's status. ToMoBrush extracts tooth resonance signatures from the acoustic signals to characterize varied dental health conditions of the teeth. We evaluate ToMoBrush on 19 participants and dental-standard models for detecting common dental problems including caries, calculus, and food impaction, achieving a detection ROC-AUC of 0.90, 0.83, and 0.88 respectively. Interviews with dental experts validate ToMoBrush's potential in enhancing at-home dental healthcare.
In the recent two decades, the Mexico City Metropolitan Area (MCMA) has been plagued by high concentrations of air pollutants, risking the health integrity of its inhabitants. Although some policies have been undertaken, they have been insufficient to deplete high air pollutants. Environmental contingencies are commonly imposed when the ozone concentration overpasses a certain threshold, which is well above the recommended maximum by the WHO. This work used a causal version of a generalized Morlet wavelet to characterize the dynamics of daily ozone concentration in the MCMA. The results indicated that the formation of dangerous ozone concentration levels is a consequence of accumulation and incomplete dissipation effects acting over a wide range of time scales. Ozone contingencies occurred when the wavelet coefficient power is increasing, which was linked to an inti-persistence behavior. It was proposed that the wavelet methodology could be used as a further tool for signaling the potential formation of adverse ozone pollution scenarios.
The availability of cellphone geolocation data provides a remarkable opportunity to study human mobility patterns and how these patterns are affected by the recent pandemic. Two simple centrality metrics allow us to measure two different aspects of mobility in origin-destination networks constructed with this type of data: variety of places connected to a certain node (degree) and number of people that travel to or from a given node (strength). In this contribution, we present an analysis of node degree and strength in daily origin-destination networks for Greater Mexico City during 2020. Unlike what is observed in many complex networks, these origin-destination networks are not scale free. Instead, there is a characteristic scale defined by the distribution peak; centrality distributions exhibit a skewed two-tail distribution with power law decay on each side of the peak. We found that high mobility areas tend to be closer to the city center, have higher population and better socioeconomic conditions. Areas with anomalous behavior are almost always on the periphery of the city, where we can also observe qualitative difference in mobility patterns between east and west. Finally, we study the effect of mobility restrictions due to the outbreak of the COVID-19 pandemics on these mobility patterns.
Dental informatics is a rapidly evolving field that combines dentistry with information technology to improve oral health care delivery, research, and education. Electronic health records (EHRs), telehealth, digital imaging, and other digital tools have revolutionised how dental professionals diagnose, treat, and manage oral health conditions. In this review article, we will explore dental informatics's current trends and future directions, focusing on its impact on clinical practice, research, and education. We will also discuss the challenges and opportunities associated with implementing dental informatics and highlight fundamental research studies and innovations in the field.
Dental template and parametric dental models are important tools for various applications in digital dentistry. However, constructing an unbiased dental template and accurate parametric dental models remains a challenging task due to the complex anatomical and morphological dental structures and also low volume ratio of the teeth. In this study, we develop an unbiased dental template by constructing an accurate dental atlas from CBCT images with guidance of teeth segmentation. First, to address the challenges, we propose to enhance the CBCT images and their segmentation images, including image cropping, image masking and segmentation intensity reassigning. Then, we further use the segmentation images to perform co-registration with the CBCT images to generate an accurate dental atlas, from which an unbiased dental template can be generated. By leveraging the unbiased dental template, we construct parametric dental models by estimating point-to-point correspondences between the dental models and employing Principal Component Analysis to determine shape subspaces of the parametric dental models. A total of 159 CBCT images of real subjects are collected to perform the constructions. Experimental results demonstrate effectiveness of our proposed method in constructing unbiased dental template and parametric dental model. The developed dental template and parametric dental models are available at https://github.com/Marvin0724/Teeth_template.
Solar radiation is made up of three components of electromagnetic waves: infrared, visible and ultraviolet. The infrared component is the cause of thermal energy, the visible spectrum allows to see through the eyes and the ultraviolet component is the most energetic and damaging. Solar radiation has several benefits, such as helping to synthesize vitamin D in the skin, favors blood circulation, among others benefits for the human body. In the Earth, it is the main source of energy for agriculture, also used as an alternative source of energy to hydrocarbons, through solar cells. The solar irradiance represents the surface power density with units W/m2 in SI. Too much exposure can cause damage and an increase in value over the time can be can be also damaging. In this work it was used an open data base provided by Secretaría del Medio Ambiente, from which a statistical analysis was performed of the solar irradiance values measured at various meteorological stations in Mexico City and the so-called metropolitan area, from 2018 to 2021. This analysis was carried out per years, months and days. From the solar irradiance values distributions, it was obtained the averages, maximums and means were it was found there was no variation in the solar irradiance values over this period of years.
Convolutional denoising autoencoders (DAEs) are powerful tools for image restoration. However, they inherit a key limitation of convolutional neural networks (CNNs): they tend to recover low-frequency features, such as smooth regions, more effectively than high-frequency details. This leads to the loss of fine details, which is particularly problematic in dental radiographs where preserving subtle anatomical structures is crucial. While self-attention mechanisms can help mitigate this issue by emphasizing important features, conventional attention methods often prioritize features corresponding to cleaner regions and may overlook those obscured by noise. To address this limitation, we propose a noise-aware self-attention method, which allows the model to effectively focus on and recover key features even within noisy regions. Building on this approach, we introduce the noise-aware attention-enhanced denoising autoencoder (NAADA) network for enhancing noisy panoramic dental radiographs. Compared with the recent state of the art (and much heavier) methods like Uformer, MResDNN etc., our method improves the reconstruction of fine details, ensuring better image quality and diagnostic accuracy.
Cardiovascular disease lead the cause of death world wide and several studies have been carried out to understand and explore cardiovascular risk markers in normoglycemic and diabetic populations. In this work, we explore the association structure between hyperglycemic markers and cardiovascular risk markers controlled by triglycerides, body mass index, age and gender, for the normoglycemic population in The Mexico City Diabetes Study. Understanding the association structure could contribute to the assessment of additional cardiovascular risk markers in this low income urban population with a high prevalence of classic cardiovascular risk biomarkers. The association structure is measured by conditional Kendall's tau, defined through conditional copula functions. The latter are in turn modeled under a fully Bayesian nonparametric approach, which allows the complete shape of the copula function to vary for different values of the controlled covariates.
The solar radiation are electromagnetic waves, composed of infrared, visible spectrum and ultraviolet. The infrared component is the cause of thermal energy, the visible spectrum allows to see and the ultraviolet component is the most energetic part and dangerous for the human body (skin and eyes). The ultraviolet rays are divided in a wavelength range, in three parts; called UVA (100-280 nm), UVB (280-315 nm) and UVC (315-400 nm). The UVC are the most energetic (followed by the UVB rays ), however are stopped in the ozone layer. In this work it shown a statistical analysis of the UVB index measured by five station in Mexico City, from the years 2000 to 2022. Through a Gaussian fit distribution, it was found that the range when the IUVB value exceeds the value of seven, which is from 11:00 to 16:00, having an average mean value of 13:09 hrs. ± 4 min. i.e. the time at which the UVB index reaches its maximum value. This occurs in the months from February to October. More than 80% of radiation is for UVB values less than 7 and less than the remaining 20% is for IUVB values greater than 7. Finally, it was possible to observe that the mean value per year, reaches its maximum when the solar cycles occurs, which was in the years 2003 and 2013.
The international planetary science community met in London in January 2020, united in the goal of realising the first dedicated robotic mission to the distant Ice Giants, Uranus and Neptune, as the only major class of Solar System planet yet to be comprehensively explored. Ice-Giant-sized worlds appear to be a common outcome of the planet formation process, and pose unique and extreme tests of our understanding of planetary origins, exotic water-rich planetary interiors, dynamic seasonal atmospheres, complex magnetospheric configurations, geologically-rich icy satellites (both natural and captured), and delicate planetary rings. This article introduces a special issue of Philosophical Transactions of the Royal Society A on Ice Giant System exploration at the start of the 2020s. We review the scientific potential and existing mission design concepts for an ambitious international partnership for exploring Uranus and/or Neptune in the coming decades.
Pediatric dental segmentation is critical in dental diagnostics, presenting unique challenges due to variations in dental structures and the lower number of pediatric X-ray images. This study proposes a custom SegUNet model with a VGG19 backbone, designed explicitly for pediatric dental segmentation and applied to the Children's Dental Panoramic Radiographs dataset. The SegUNet architecture with a VGG19 backbone has been employed on this dataset for the first time, achieving state-of-the-art performance. The model reached an accuracy of 97.53%, a dice coefficient of 92.49%, and an intersection over union (IOU) of 91.46%, setting a new benchmark for this dataset. These results demonstrate the effectiveness of the VGG19 backbone in enhancing feature extraction and improving segmentation precision. Comprehensive evaluations across metrics, including precision, recall, and specificity, indicate the robustness of this approach. The model's ability to generalize across diverse dental structures makes it a valuable tool for clinical applications in pediatric dental care. It offers a reliable and efficient solution for automated dental diagnostics.
Epidemiological models contain a set of parameters that must be adjusted based on available observations. Once a model has been calibrated, it can be used as a forecasting tool to make predictions and to evaluate contingency plans. It is customary to employ only point estimators for such predictions. However, some models may fit the same data reasonably well for a broad range of parameter values, and this flexibility means that predictions stemming from such models will vary widely, depending on the particular parameter values employed within the range that give a good fit. When data are poor or incomplete, model uncertainty widens further. A way to circumvent this problem is to use Bayesian statistics to incorporate observations and use the full range of parameter estimates contained in the posterior distribution to adjust for uncertainties in model predictions. Specifically, given the epidemiological model and a probability distribution for observations, we use the posterior distribution of model parameters to generate all possible epidemiological curves via the posterior predictive distribution. From the envelope of all curves one can extract the worst-case scenario and study the impact of implementing contingency plans according to this assessment. We apply this approach to the potential evolution of COVID-19 in Mexico City and assess whether contingency plans are being successful and whether the epidemiological curve has flattened.
In this work we report the variations of the atmospheric muons flux in Mexico City. The measurements were performed from September to December 2023 at at the Institute of Nuclear Sciences of UNAM, located at coordinates 19.32∘N 99.18∘W, with an altitude of 2274 meters above see level and a cutoff rigidity of 8.24 GV. The experimental setup consists of a pair of scintillators, with dimensions of 50cm x 1m. To compensate for fluctuations in air pressure, we calculate the barometric coefficient using data, which is determined to be -0.21%/mb. The observed muon flux corresponds to 98.3±2.6 m−2 s−1 sr−1, and is consistent with other measurements at the same location. We have identified three variations in the pressure-corrected muon flux that exhibit a pattern similar to those observed by a neutron cosmic ray detector at UNAM. Through an extensive analysis of the publicly available geomagnetic data, we have correlated these variations with a phenomenon known as a Forbush decrease.
Learning about diagnostic features and related clinical information from dental radiographs is important for dental research. However, the lack of expert-annotated data and convenient search tools poses challenges. Our primary objective is to design a search tool that uses a user's query for oral-related research. The proposed framework, Contrastive LAnguage Image REtrieval Search for dental research, Dental CLAIRES, utilizes periapical radiographs and associated clinical details such as periodontal diagnosis, demographic information to retrieve the best-matched images based on the text query. We applied a contrastive representation learning method to find images described by the user's text by maximizing the similarity score of positive pairs (true pairs) and minimizing the score of negative pairs (random pairs). Our model achieved a hit@3 ratio of 96% and a Mean Reciprocal Rank (MRR) of 0.82. We also designed a graphical user interface that allows researchers to verify the model's performance with interactions.