| Total: 537
An analogue testing standard IEEE 1149.4 is mainly targeted for low-frequency testing. The problem studied in this paper is extending the standard also for radio frequency testing. IEEE 1149.4 compatible measurement structures (ABMs) developed in this study extract the information one is measuring from the radio frequency signal and represent the result as a DC voltage level. The ABMs presented in this paper are targeted for power and frequency measurements operating in frequencies from 1 GHz to 2 GHz. The power measurement error caused by temperature, supply voltage and process variations is roughly 2 dB and the frequency measurement error is 0.1 GHz, respectively.
The class of Unambiguous Star-Free Regular Languages (UL) was defined by Schutzenberger as the class of languages defined by Unambiguous Polynomials. UL has been variously characterized (over finite words) by logics such as TL[X_a,Y_a], UITL, TL[F,P], FO2[<], the variety DA of monoids, as well as partially-ordered two-way DFA (po2DFA). We revisit this language class with emphasis on notion of unambiguity and develop on the concept of Deterministic Logics for UL. The formulas of deterministic logics uniquely parse a word in order to evaluate satisfaction. We show that several deterministic logics robustly characterize UL. Moreover, we derive constructive reductions from these logics to the po2DFA automata. These reductions also allow us to show NP-complete satisfaction complexity for the deterministic logics considered. Logics such as TL[F,P], FO2[<] are not deterministic and have been shown to characterize UL using algebraic methods. However there has been no known constructive reduction from these logics to po2DFA. We use deterministic logics to bridge this gap. The language-equivalent po2DFA for a given TL[F,P] formula is constructed and we analyze its size relative to the size of the TL[F,P] formula. This is an efficient reduction which gives an alternate proof to NP-complete satisfiability complexity of TL[F,P] formulas.
We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL UEs, respectively. To this end, we propose distributed beamforming designs enabled by iterative bi-directional training (IBT) and based on the minimum mean squared error criterion. To reduce the IBT overhead and thus enhance the effective DL and UL rates, we carry out the distributed beamforming design by assuming that all the UEs are served solely in the DL and then utilize the obtained beamformers for the DL and UL data transmissions after proper scaling. Numerical results show the superiority of the proposed combined DL-UL distributed beamforming design over separate DL and UL designs, especially with short resource blocks.
In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short scheduling blocks. This paper proposes a framework to reduce the bi-directional training overhead by considering a common beamforming training strategy for both DL and UL when the UEs to be served in the two directions are the same. In doing so, we consider the problem of maximizing the (weighted) minimum DL-UL rate among all the UEs. Numerical results show that, in scenarios with short scheduling blocks, the proposed framework outperforms the case where the DL and UL beamforming strategies are computed individually via two separate bi-directional training phases thanks to the reduced training overhead. Even more substantial gains are observed with respect to the case with a single bi-directional training phase, where the DL (resp. UL) beamforming strategies are reused in the UL (resp. DL).
One of the fundamental challenges to realize massive Multiple-Input Multiple-Output (MIMO) communications is the accurate acquisition of channel state information for a plurality of users at the base station. This is usually accomplished in the UpLink (UL) direction profiting from the time division duplexing mode. In practical base station transceivers, there exist inevitably nonlinear hardware components, like signal amplifiers and various analog filters, which complicates the calibration task. To deal with this challenge, we design a deep neural network for channel calibration between the UL and DownLink (DL) directions. During the initial training phase, the deep neural network is trained from both UL and DL channel measurements. We then leverage the trained deep neural network with the instantaneously estimated UL channel to calibrate the DL one, which is not observable during the UL transmission phase. Our numerical results confirm the merits of the proposed approach, and show that it can achieve performance comparable to conventional approaches, like the Agros method and methods based on least squares, that however assume linear hardware behavior models. More importantly, considering generic nonlinear relationships between the UL and DL channels, it is demonstrated that our deep neural network approach exhibits robust performance, even when the number of training sequences is limited.
The TD-LTE system is envisaged to adopt dynamic time division duplexing (TDD) transmissions for small cells to adapt their communication service to the fast variation of downlink (DL) and uplink (UL) traffic demands. However, different DL/UL directions for the same subframe in adjacent cells will result in new destructive interference components, i.e., eNB-to-eNB and UE-to-UE, with levels that can significantly differ from one subframe to another. In this paper, a feasible UL power control mechanism is proposed to manage eNB-to-eNB interference, where different UL power control parameters are set based on different interference level. We consider the geometric location information and the subframe set selection process about adjacent eNBs when the interference level is estimated. The performance of the proposed scheme is evaluated through system level simulations and it is shown that the scheme can achieve preferable improvement in terms of UL average and 5%-ile packet throughputs compared with the original scheme without power control. Also, the UE-to-UE interference is not worse when the UE transmit power become higher.
This paper presents, for the first time, an open-source implementation of the 3GPP Uplink Time Difference of Arrival (UL-TDoA) positioning method using the OpenAirInterface (OAI) framework. UL-TDoA is a critical positioning technique in 5G networks, leveraging the time differences of signal arrival at multiple base stations to determine the precise location of User Equipment (UE). This implementation aims to democratize access to advanced positioning technology by integrating UL-TDoA capabilities into both the Radio Access Network (RAN) and Core Network (CN) components of OAI, providing a comprehensive and 3GPP-compliant solution. The development includes the incorporation of essential protocol procedures, message flows, and interfaces as defined by 3GPP standards. Validation is conducted using two distinct methods: an OAI-RF simulator-based setup for controlled testing and an O-RAN-based Localization Testbed at EURECOM in real-world conditions. The results demonstrate the viability of this open-source UL-TDoA implementation, enabling precise positioning in various environments. By making this implementation publicly available, the study paves the way for widespread research, development, and innovation in the field of 5G positioning technologies, fostering collaboration and accelerating the advancement of cellular network positioning.
One of the main novelties in 5G is the flexible Time Division Duplex (TDD) frame, which allows adaptation to the latency requirements. However, this flexibility is not sufficient to support heterogeneous latency requirements, in which different traffic instances have different switching requirements between Uplink (UL) and Downlink (DL). This is visible in a traffic mix of enhanced mobile broadband (eMBB) and ultra-reliable low-latency communications (URLLC). In this paper we address this problem through the use of a decoupled UL/DL access, where the UL and the DL of a device are not necessarily served by the same base station. The latency gain over coupled access is quantified in the form of queueing sojourn time in a Rayleigh channel, as well as an upper bound for critical traffic.
In this paper, we investigate unmanned aerial vehicle (UAV) assisted communication systems that require quasi-balanced data rates in uplink (UL) and downlink (DL), as well as users' heterogeneous traffic. To the best of our knowledge, this is the first work to explicitly investigate joint UL-DL optimization for UAV assisted systems under heterogeneous requirements. A hybrid-mode multiple access (HMMA) scheme is proposed toward heterogeneous traffic, where non-orthogonal multiple access (NOMA) targets high average data rate, while orthogonal multiple access (OMA) aims to meet users' instantaneous rate demands by compensating for their rates. HMMA enables a higher degree of freedom in multiple access and achieves a superior minimum average rate among users than the UAV assisted NOMA or OMA schemes. Under HMMA, a joint UL-DL resource allocation algorithm is proposed with a closed-form optimal solution for UL/DL power allocation to achieve quasi-balanced average rates for UL and DL. Furthermore, considering the error propagation in successive interference cancellation (SIC) of NOMA, an enhanced-HMMA scheme is proposed, which demonstrates high robustness against SIC error and a higher minimum average rate than the HMMA scheme.
We propose a novel method for massive Multiple-Input Multiple-Output (massive MIMO) in Frequency Division Duplexing (FDD) systems. Due to the large frequency separation between Uplink (UL) and Downlink (DL), in FDD systems channel reciprocity does not hold. Hence, in order to provide DL channel state information to the Base Station (BS), closed-loop DL channel probing and Channel State Information (CSI) feedback is needed. In massive MIMO this incurs typically a large training overhead. For example, in a typical configuration with M = 200 BS antennas and fading coherence block of T = 200 symbols, the resulting rate penalty factor due to the DL training overhead, given by max{0, 1 - M/T}, is close to 0. To reduce this overhead, we build upon the well-known fact that the Angular Scattering Function (ASF) of the user channels is invariant over frequency intervals whose size is small with respect to the carrier frequency (as in current FDD cellular standards). This allows to estimate the users' DL channel covariance matrix from UL pilots without additional overhead. Based on this covariance information, we propose a novel sparsifying precoder in order to maximize the rank of the effective sparsified channel matrix subject to the condition that each effective user channel has sparsity not larger than some desired DL pilot dimension T_{dl}, resulting in the DL training overhead factor max{0, 1 - T_{dl} / T} and CSI feedback cost of T_{dl} pilot measurements. The optimization of the sparsifying precoder is formulated as a Mixed Integer Linear Program, that can be efficiently solved. Extensive simulation results demonstrate the superiority of the proposed approach with respect to concurrent state-of-the-art schemes based on compressed sensing or UL/DL dictionary learning.
Lightweight models are essential for real-time speech enhancement applications. In recent years, there has been a growing trend toward developing increasingly compact models for speech enhancement. In this paper, we propose an Ultra-Lightweight U-net optimized by Network Architecture Search (UL-UNAS), which is suitable for implementation in low-footprint devices. Firstly, we explore the application of various efficient convolutional blocks within the U-Net framework to identify the most promising candidates. Secondly, we introduce two boosting components to enhance the capacity of these convolutional blocks: a novel activation function named affine PReLU and a causal time-frequency attention module. Furthermore, we leverage neural architecture search to discover an optimal architecture within our carefully designed search space. By integrating the above strategies, UL-UNAS not only significantly outperforms the latest ultra-lightweight models with the same or lower computational complexity, but also delivers competitive performance compared to recent baseline models that require substantially higher computational resources.
In this work, we analyze the performance of the uplink (UL) of a cellular network where the base station (BS) locations follow a homogeneous Poisson point process (PPP), and the locations of users and BSs are spatially coupled. In order to capture this coupling, we consider that users attached to a BS are located uniformly at random independently of each other in the Johnson-Mehl (JM) cell of that BS. For this system model, we derive analytical expressions for the UL signal to interference ratio (SIR) coverage probability and average spectral efficiency (SE) of a typical user in the network. One of the key intermediate steps in our analysis is the approximate, but accurate, characterization of the area distribution of a typical JM cell. Another key intermediate step is the accurate statistical characterization of the point process formed by the interfering users that subsequently enables the coverage probability analysis. We present coverage probability and SE results for a typical user and study the interplay between different system parameters.
Let T be an operator and suppose that there exists a positive constant C such that (∫I|Tf(x)|qdx)1/q≤C(∫I|f(x)|qdx)1/q
Intelligent reflecting surface (IRS) is a promising technology to improve the performance of wireless powered communication networks (WPCNs) due to its capability to reconfigure signal propagation environments via smart reflection. In particular, the high passive beamforming gain promised by IRS can significantly enhance the efficiency of both downlink wireless power transfer (DL WPT) and uplink wireless information transmission (UL WIT) in WPCNs. Although adopting different IRS phase shifts for DL WPT and UL WIT, i.e., dynamic IRS beamforming, is in principle possible but incurs additional signaling overhead and computational complexity, it is an open problem whether it is actually beneficial. To answer this question, we consider an IRS-assisted WPCN where multiple devices employ a hybrid access point (HAP) to first harvest energy and then transmit information using non-orthogonal multiple access (NOMA). Specifically, we aim to maximize the sum throughput of all devices by jointly optimizing the IRS phase shifts and the resource allocation. To this end, we first prove that dynamic IRS beamforming is not needed for the considered system, which helps reduce the number of IRS phase shifts to be optimized. Then, we propose both joint and alternating optimization based algorithms to solve the resulting problem. Simulation results demonstrate the effectiveness of our proposed designs over benchmark schemes and also provide useful insights into the importance of IRS for realizing spectrally and energy efficient WPCNs.
We analyse the clump population of the spiral galaxy Sp 1149 at redshift 1.5. Located behind the galaxy cluster MACS J1149.5+2223, Sp 1149 has been significantly magnified allowing us to study the galaxy on physical scales down to ~100 pc. We have used the publicly available multi-band imaging dataset (CLASH) to reconstruct the spectral energy distributions (SEDs) of the clumps in Sp 1149, and derive, by means of stellar evolutionary models, their physical properties. We found that 40% of the clumps observed in Sp 1149 are older than 30 Myr and can be as old as 300 Myr. These are also the more massive (luminous) clumps in the galaxy. Among the complexes in the local reference sample, the star-forming knots in luminous blue compact galaxies could be considered progenitor analogs of these long-lived clumps. The remaining 60% of clumps have colors comparable to local cluster complexes, suggesting a similar young age. We observe that the Sp 1149 clumps follow the M ~ R^2 relation similar to local cluster complexes, suggesting similar formation mechanisms although they may have different initial conditions (e.g. higher gas surface densities). We suggest that the galaxy is experiencing a slow decline in star formation rate and a likely transitional phase toward a more quiescent star-formation mode. The older clumps have survived between 6 and 20 dynamical times and are all located at projected distances smaller than 4 kpc from the centre. Their current location suggests migration toward the centre and the possibility to be the building blocks of the bulge. On the other hand, the dynamical timescale of the younger clumps are significantly shorter, meaning that they are quite close to their birthplace. We show that the clumps of Sp 1149 may account for the expected metal-rich globular cluster population usually associated with the bulge and thick disk components of local spirals.
Sparsity, Structure, Scaling and Stability in Computational Linear Algebra - Textbook from the IX School of Computer Science, held on July 24-31 of 1994 at Recife, Brazil. Esparsidade, Estrutura, Escalamento e Estabilidade em Algebra Linear Computacional - Livro texto da IX Escola de Computacao, realizada nos dias 24 a 31 de Julho de 1994 em Recife, Brasil. This textbook is written in Portuguese Language.
In this paper we study the single longitudinal spin asymmetry Asin(ϕh−ϕR)UL of dihadron production in semi-inclusive deep inelastic scattering (SIDIS) via helicity-dependent dihadron fragmentation function (DiFF), which describes the correlation of the longitudinal polarization of a fragmenting quark with the transverse momenta of the produced hadron pair. Recently experimental searching for this azimuthal asymmetry in dihadron SIDIS by the COMPASS Collaboration yielded a very small signal. Here we calculate this unknown T-odd DiFF G⊥1 using a spectator model to access the asymmetry and clarify why the signal is very small. The transverse momentum dependent (TMD) factorization method, in which the transverse momentum of the final state hadron pair leaves unintegrated, has been applied. We estimate the sin(ϕh−ϕR) asymmetry at the kinematics of COMPASS experiments and compare with the data. What's more, the predictions on the same asymmetry are also made at the Electron Ion Collider (EIC).
Data-driven visual-inertial odometry (VIO) has received highlights for its performance since VIOs are a crucial compartment in autonomous robots. However, their deployment on resource-constrained devices is non-trivial since large network parameters should be accommodated in the device memory. Furthermore, these networks may risk failure post-deployment due to environmental distribution shifts at test time. In light of this, we propose UL-VIO -- an ultra-lightweight (<1M) VIO network capable of test-time adaptation (TTA) based on visual-inertial consistency. Specifically, we perform model compression to the network while preserving the low-level encoder part, including all BatchNorm parameters for resource-efficient test-time adaptation. It achieves 36X smaller network size than state-of-the-art with a minute increase in error -- 1% on the KITTI dataset. For test-time adaptation, we propose to use the inertia-referred network outputs as pseudo labels and update the BatchNorm parameter for lightweight yet effective adaptation. To the best of our knowledge, this is the first work to perform noise-robust TTA on VIO. Experimental results on the KITTI, EuRoC, and Marulan datasets demonstrate the effectiveness of our resource-efficient adaptation method under diverse TTA scenarios with dynamic domain shifts.
We study violation of quark-hadron duality for ˉB→Xulν and D→Xdlν decays in the presence of the right-handed current operator. For this case, we show that duality violation has some aspects different from the standard model due to the existence of an instanton. In particular, the fermionic zero mode of an intermediate light quark can give a nonvanishing contribution owing to its chirality structure. A duality-violating component that arises from a single instanton is then analytically extracted as a finite-distance singularity, leading to an oscillatory correction to the observable in Minkowski space. Finally, we show that the size of duality violation for the lepton energy distribution in ˉB decays can be comparable to the chirally suppressed perturbative contribution although the absolute size depends on the detail of the QCD vacuum.
The single longitudinal spin asymmetry Asin(2ϕh−2ϕR)UL of dihadron production in semi-inclusive deep inelastic scattering (SIDIS) is examined through helicity-dependent dihadron fragmentation function (DiFF) G⊥1. The correlation of the longitudinal polarization of a fragmenting quark with the transverse momenta of the produced hadron pair is illustrated by this DiFF. The experimental investigation for this azimuthal asymmetry in dihadron SIDIS by the COMPASS Collaboration has lately yielded a very small signal. Here, the unknown T-odd dihadron fragmentation function G⊥1 utilizing a spectator model is computed. The model has been successfully used to describe the dihadron production in both the unpolarized and the single polarized processes to access the asymmetry and clarify why the signal is very small. The transverse momentum dependent factorization method, in which the transverse momentum of the final state hadron pair is left unintegrated, has been considered. The sin(2ϕh−2ϕR) asymmetry at the COMPASS kinematics is estimated and we compare it with the data. Besides, the predictions on the same asymmetry are also made at the HERMES and Electron Ion Collider.
We propose a deep reinforcement learning (DRL) approach for a full-duplex (FD) transmission that predicts the phase shifts of the reconfigurable intelligent surface (RIS), base station (BS) active beamformers, and the transmit powers to maximize the weighted sum rate of uplink and downlink users. Existing methods require channel state information (CSI) and residual self-interference (SI) knowledge to calculate exact active beamformers or the DRL rewards, which typically fail without CSI or residual SI. Especially for time-varying channels, estimating and signaling CSI to the DRL agent is required at each time step and is costly. We propose a two-stage DRL framework with minimal signaling overhead to address this. The first stage uses the least squares method to initiate learning by partially canceling the residual SI. The second stage uses DRL to achieve performance comparable to existing CSI-based methods without requiring the CSI or the exact residual SI. Further, the proposed DRL framework for quantized RIS phase shifts reduces the signaling from BS to the RISs using 32 times fewer bits than the continuous version. The quantized methods reduce action space, resulting in faster convergence and 7.1% and 22.28% better UL and DL rates, respectively than the continuous method.
The Internet-of-things (IoT) is the paradigm where anything will be connected. There are two main approaches to handle the surge in the uplink (UL) traffic the IoT is expected to generate, namely, Scheduled UL (SC-UL) and random access uplink (RA-UL) transmissions. SC-UL is perceived as a viable tool to control Quality-of-Service (QoS) levels while entailing some overhead in the scheduling request prior to any UL transmission. On the other hand, RA-UL is a simple single-phase transmission strategy. While this obviously eliminates scheduling overheads, very little is known about how scalable RA-UL is. At this critical junction, there is a dire need to analyze the scalability of these two paradigms. To that end, this paper develops a spatiotemporal mathematical framework to analyze and assess the performance of SC-UL and RA-UL. The developed paradigm jointly utilizes stochastic geometry and queueing theory. Based on such a framework, we show that the answer to the "scheduling vs. random access paradox" actually depends on the operational scenario. Particularly, RA-UL scheme offers low access delays but suffers from limited scalability, i.e., cannot support a large number of IoT devices. On the other hand, SC-UL transmission is better suited for higher device intensities and traffic rates.
This paper firstly develops an analytical framework to investigate the performance of uplink (UL) / downlink (DL) decoupled access in cellular vehicle-to-everything (C-V2X) networks, in which a vehicle's UL/DL can be connected to different macro/small base stations (MBSs/SBSs) separately. Using the stochastic geometry analytical tool, the UL/DL decoupled access C-V2X is modeled as a Cox process, and we obtain the following theoretical results, i.e., 1) the probability of different UL/DL joint association cases i.e., both the UL and DL are associated with the different MBSs or SBSs, or they are associated with different types of BSs; 2) the distance distribution of a vehicle to its serving BSs in each case; 3) the spectral efficiency of UL/DL in each case; and 4) the UL/DL coverage probability of MBS/SBS. The analyses reveal the insights and performance gain of UL/DL decoupled access. Through extensive simulations, \textcolor{black}{the accuracy of the proposed analytical framework is validated.} Both the analytical and simulation results show that UL/DL decoupled access can improve spectral efficiency. The theoretical results can be directly used for estimating the statistical performance of a UL/DL decoupled access C-V2X network.
The transformative enhancements of fifth-generation (5G) mobile devices bring about new challenges to achieve better uplink (UL) performance. Particularly, in codebook-based transmission, the wide-band (WB) precoding and the legacy UL codebook may become main bottlenecks for higher efficient data transmission. In this paper, we investigate the codebook-based UL single-layer transmission performance using fully coherent antenna ports in the context of sub-band (SB) precoding. We analyze the SB precoder selection criteria and design an UL codebook used for SB precoding by increasing the number of relative phase shifts of each port. Via link-level simulations, we verify that the UL SB precoding can improve up to 2 dB performance gain in terms of the block error rate (BLER) compared with the UL WB precoding which is the current UL precoding scheme. We also show that UL performance gain is sensitive to the SB size selection as well as the relative phase shift diversity.
Beam correspondence, or downlink-uplink (DL-UL) beam reciprocity, refers to the assumption that the best beams in the DL are also the best beams in the UL. This is an important assumption that allows the existing beam management framework in 5G to rely heavily on DL beam sweeping and avoid UL beam sweeping: UL beams are inferred from the measurements of the DL reference signals. Beam correspondence holds when the radio configurations are symmetric in the DL and UL. However, as mmWave technology matures, the DL and the UL face different constraints often breaking the beam correspondence. For example, power constraints may require a UE to activate only a portion of its antenna array for UL transmission, while still activating the full array for DL reception. Meanwhile, if the UL beam with sub-array, named as sub-chain beam in this paper, has a similar radiation pattern as the DL beam, the beam correspondence can still hold. This paper proposes methods for sub-chain beam codebook design to achieve a trade-off between the power saving and beam correspondence.